Browsing Materials Engineering (MatEng) by Title
Now showing items 12-31 of 286
-
Cerium Oxide-based Degradable Polymer Nanocomposites for Bone Tissue Engineering
The incidences of bone-related disorders is growing steeply worldwide because of acute trauma, diseases related to aging, and obesity. Bone has a natural regenerative capacity to repair and regenerate fractures and small ... -
Co-continuous microstructures through spinodal decomposition in ternary systems: A phase field study
We have studied spinodal decomposition which leads to a three-phase microstructure in ternary alloys using computer simulations based on the ternary Cahn-Hilliard equations. All the alloys we have studied are in the same ... -
Cold Model Study Of Formation And Breaking Of Raceway
(Indian Institute of Science, 2005-12-22)The raceway in the ironmaking blast furnace is a void in front of the hot blast tuyeres where coke and supplementary fuel burn to supply heat to the ironmaking process. The air velocity through the tuyeres is high (around ... -
A Cold Model study Of Raceway Hysteresis
(2011-08-24) -
Correlation Between Microstructure and Corrosion Properties of Electrodeposited Nickel and Zinc Based Coatings
Conventional metallic coatings such as Ni and Zn are extensively used in corrosion protection applications. In most studies on the corrosion behavior of metallic coatings, the emphasis is on correlating morphology and ... -
Correlation Between Structure, Microstructure and Enhanced Piezoresponse Around the Morphotropic Phase Boundary of Bismuth Scandate-Lead Titanate Piezoceramic
(2018-05-11)Piezoelectric materials find use as actuators and sensors in automotive, aerospace and other related industries. Automotive applications such as fuel injection nozzles and engine health monitoring systems require operating ... -
Corrosion And Wear Behaviour of Plasma Electrolytic Oxidation And Laser Surface Alloy Coatings Produced on Mg Alloys
(2017-10-11)In the present investigation, surface coatings employing laser surface alloying (LSA) and plasma electrolytic oxidation (PEO) processes have been prepared on Mg alloys. The coatings have been investigated for corrosion and ... -
Creep And Grain Boundary Sliding In A Mg-0.7% Al Alloy
(2011-08-25) -
Creep, Wear And Corrosion Behaviour Of Novel Magnesium Alloys And Composites
(2011-04-01)In the present investigation, MMCs have been fabricated using the creep-resistant AE42 magnesium alloy as matrix and reinforcing it with saffil short fibres (essentially δ-Al2O2) and SiC particles in various combinations. ... -
Degradation Of Water Soluble Polymers
(2011-08-25) -
Densification Mechanisms for Spark Plasma Sintering in Alumina and Alumina Based Systems
(2018-03-19)The densification mechanisms of polycrystalline α-alumina by spark plasma sintering are highly contradictory, with different research groups suggesting diffusion to dislocation controlled mechanisms to be rate controlling. ... -
Densification, Oxidation, Mechanical And Thermal Behaviour Of Zirconium Diboride (ZrB2) And Zirconium Diboride - Silicon Carbide (ZrB2-Sic) Composites
(2016-11-23)Sharp leading edges and nose caps on hypersonic vehicles, re-entry vehicles and reusable launch vehicles are items of current research interest for enhanced aerodynamic performance and maneuverability. The unique combination ... -
Design & Fabrication of Bio-responsive Drug Carriers Based on Protamine & Chondroitin Sulphate Biopolymers
(2017-10-26)The present thesis focuses on the fabrication of bio-stimuli responsive micro- and nano-carriers for drug delivery applications. In particular, the objective of this work is to investigate the possibility of using polypeptide ... -
Design and Fabrication of Conjugated Molecule Based Resistive Sensor for Environmental Monitoring Detecting Targeted Analytes
(2018-06-05)Volatile organic compounds (VOCs) in air and heavy metal ions, anions, microorganism in water are environmental contaminants that require detection at certain low concentrations to avoid detrimental effects. Analytical ... -
Design, Fabrication and Application of In situ Total Internal Reflection (TIR) Raman Tribometer For the Chemical Analysis of Tribological Systems
In conventional tribological experiments that study friction and wear behavior of materials, the contact interface is hidden by the contacting bodies. The physical or chemical phenomena taking place at the interface must ... -
Destabilisation and Failure of Cylindrical Nanopores : A Phase Field Study
(2017-11-28)Phase field models have played an important role in shaping our understanding of a variety of micro structural phenomena in materials. Their attractive features include (a) their ability to capture instabilities in ...