Browsing Materials Engineering (MatEng) by Title

Fabrication Of Epoxy Composites With CTBN And Fly Ash As Individual And Hybrid Fillers : Studies On Curing Schedule And Mechanical Properties Under Static And Dynamic Loading Conditions

Santra, Sanjitarani (2011-07-15)

Failure Analysis Of Glass, Carbon Or Kevlar Fibre Reinforced Epoxy Based Composites In Static Loading Conditions

Krishnan, Padmanabhan (2013-08-26)

Fatigue Damage Characterization Of Carbon/Epoxy Laminates Under Spectrum Loading

Sudha, J (2013-10-04)

Fibre Reinforced Polymer Composites are extensively used in aircraft structures because of its high specific stiffness, high specific strength and tailorability. Though Fibre Reinforced Polymers offer many advantages, they ...

First Principles Study Of Structure And Stacking Fault Energies In Some Metallic Systems

Datta, Aditi (2010-08-05)

Plastic deformation in crystalline materials largely depends on the properties of dislocations, in particular their mobility. While continuum description of deformation of a crystalline metal can be made reasonably well ...

First-Principles Studies of Point Defects and Phase Transformations in Materials

Bhat, Soumya S (2018-01-18)

The functional and mechanical properties of a material are often determined by the defects in them. A thorough understanding of the relationship between the defects and the properties allows for tailoring a material’s ...

Fracture and Deformation in Bulk Metallic Glasses and Composites

Narayan, R Lakshmi (2018-01-11)

Plastic flow in bulk metallic glasses (BMGs) localizes into narrow bands, which, in the absence of a microstructure that could obstruct them, propagate unhindered under tensile loading. In constrained deformation conditions ...

A Fundamental Investigation Of Discrete Liquid, Gas And Fines Flow In A Random Packed Bed Along With Applications

Arunchaitanya, Gadi Venkat

The discontinuous nature of liquid flow in a random packed bed is observed in many chemical engineering and metallurgical applications like blast furnace and heap leaching. So, to model the liquid flow in these systems, ...

Glass Forming Ability And Stability : Bulk Zr-Based And Marginal Al-Based Glasses

Basu, Joysurya (2011-07-18)

Grain Boundary Processes In High Temperature Densification And Deformation Of Nanocrystalline Zirconia

Ghosh, Santonu (2011-02-08)

Grain boundary processes play a major role in controlling different rate processes in yttria stabilized tetragonal zirconia. The present study concentrated on rate processes in tetragonal zirconia, which were significantly ...

Graphene derivatives sandwiched with porous polyvinylidene fluoride based thin film composite membranes for effective water remediation

Maiti, Subhasish

Safe drinking water for all is perhaps one of the prime nexus of the 21st century and one of the prime sustainable development goals. Around 1.2 billion people still lack access to safe potable water, while around 2.6 ...

Growth Morphology And Coarsening Of Metastable Al3Zr In Melt Spun Al-Ni-Zr Alloys

Srinivasan, Dheepa (2013-03-01)

Heat Treatment and Surface Engineering of Selective Laser Melted Ti-6Al-4V for Improved Performance in Biomedical Implants

Sabban, Rushikesh

Metals and alloys are extensively used to prepare a wide variety of biomedical implants. The commonly employed materials are stainless steel (SS), cp-Ti, Ti-6Al-4V, etc., because of their biocompatibility and corrosion ...

Hexagonal boron nitride incorporated polymer nanocomposites for water remediation

Avasarala, Sankeerthana

The isolation of graphene in 2004 sparked a revolution in the study and applications of 2D nanomaterials in various disparate fields. Separation technology is no exception. 2D nanomaterials possess numerous desirable ...

High-Throughput Bending Tests for Investigating Creep Behavior Affected by Structural and Microstructural Inhomogeneities

Hijazi, Faizan

The bending of cantilevers is an alternate technique for the extraction of power-law creep parameters of materials. It has been shown earlier that in homogeneous systems showing tension-compression symmetry, digital image ...

Hot Deformation Behaviour of Some Refractory Metals and Alloys

Chaudhuri, Atanu (2018-06-21)

Out of the known refractory metals and alloys, molybdenum (Mo) and its alloys are very important due to their unique combination of properties which render them suitable for various applications. Owing to their good creep ...

Hyaluronic Acid Based Biodegradable Polyelectrolyte Nanocapsules and Modified Protein Nanoparticles for Targeted Delivery of Anticancer Agents

Sreeranjini, P (2018-08-02)

Targeted delivery aids in minimizing most of the drug-originated systemic toxic effects as well as improving the pharmacokinetic properties of anticancer therapeutics. Tumor targeting using hyaluronic acid (HA) as the ...

Improvement of High Temperature Oxidation Behavior of ‘w’ Free Y strengthened Co-based Superalloys through Alloying Addition

Das, Saurabh Mohan

The discovery of coherent g-g’ microstructure in Co-Al-W and Co-Al-Mo-Nb/Ta systems represents new possibilities for turbine engines materials. Their chemical and mechanical properties are similar to commercially successful ...