Browsing Materials Engineering (MatEng) by Title
Now showing items 192-211 of 322
-
Nano Surface Modifications for Anti-Corrosive and Anti-Biofouling Applications
Microbially Induced Corrosion (MIC) of materials is a major concern of marine industry. Various ferrous and non-ferrous materials used in industry are prone to MIC. Bio-fouling or formation of bio-film on material surface ... -
Nano-mechanical, optical and structural property correlations in binary, ternary, and quaternary tellurium-based chalcogenide glasses
Over a half century, from the advent of chalcogenide glasses, it was used for various applications like xerography, phase change memories (PCM), solar cells, infrared devices and so on. These applications made use of some ... -
Nanoparticles for Bio-Imaging : Magnetic Resonance Imaging and Fluorescence Imaging
(2018-07-19)This thesis provides several nanomaterial systems that can be used as contrast agents in magnetic resonance imaging (MRI) and for optical fluorescence imaging. Nanoparticle systems described in this thesis fall under three ... -
Nanoscale surface engineering of metallic biomaterials for enhancement of mechanical and biological responses
Metallic materials are widely used in load bearing orthopedic applications. The alloys used in the implants are 316L stainless steel (SS), commercially pure Ti (cp-Ti), Ti-6Al-4V and Co-Cr-Mo alloys. The life of implants ... -
Novel L12 precipitate hardened Co-base alloys
Conventional cobalt base superalloys relied on solid-solution and carbide precipitate based strengthening. They lacked high temperature (more than 800 ˚C) creep strength as compared to Ni-base superalloys which are ... -
Novel Phenomena Associated With Giant Tetragonality in the Ferroelectric BiFeO3-PbTiO3 System
The multiferroic perovskite solid solution xBiFeO3-(1-x)PbTiO3 (BF-PT) exhibits very unique features such as giant tetragonality (c/a ~ 1.19), coexistence of ferroelectric and magnetic order (in certain composition range) ... -
Numerical and experimental investigation of Process-Structure-Property relationship in Organic Photovoltaics
Organic Photovoltaics (OPVs) are considered to be potential contenders amongst the third-generation solar technologies. The primary reason for their popularity has been the possibility of applying various cost-effective ... -
Numerical Simulations on the Indentation Behaviour of Shape Memory Alloys
Shape Memory Alloys (SMAs) are increasingly being used as micro actuators, sensors, as self expanding cardiovascular stents and in MEMs based devices because of their ability to recover large values of imposed strain. ... -
On the creep behaviour of Ni based solid solution alloys from binary to quaternary
On the creep behavior of Ni based solid solution alloys from binary to quaternary A power-law relationship between the steady state strain rate (𝜀̇) and imposed stress (σ) is well established so that the 𝜀̇∝𝜎^𝑛, at a ... -
On the development of Fe-containing high entropy alloys with improved strength at high temperatures
The emergence of new multicomponent high entropy alloys (HEA) has opened up new avenues for development of high performance materials for structural applications [1]. Among all of them, the precipitation strengthened HEAs ... -
On the development of low mass density gamma strengthened Co-based superalloys
The work herein aims at developing new class of low mass density gamma-strengthened Co-based superalloys with good solvus temperature through systematic addition of Cr into the Co-Ni-Al- Mo-Ta based superalloy. The present ... -
On the Factors Influencing the Stability of Phases in the Multiferroic System BiFeO3-PbTiO3
(2018-08-11)Rhombohedral perovskite BiFeO3 is a single phase multiferroic compound exhibiting both magnetic (Neel temperature ~370˚C) and ferroelectric (Curie point ~840˚C) ordering well above the room temperature. Ferroelectricity ... -
Optimization of parameters in SiC production via Acheson Process – a hot model study
Silicon carbide (SiC) is produced industrially in a heat resistance furnace using quartz (silica) and raw petroleum coke (RPC) as the raw material. In this process, commonly known as the Acheson Process, a large current ... -
Organic-Inorganic Hybrid Photovoltaics : Interface Engineering, Fabrication and Characterization
In the past few decades the field of organic electronics particularly organics photovoltaic (OPVs) find wide interest among researchers. It finds many advantages such as light weight, low temperature fabrication requirements, ... -
PDMS-Based Nanocomposite for EMI Shielding application
Lightweight, flexible, and easy-to-integrate solutions are in great demand in electronic devices. The present work deals with the preparation of Poly dimethyl siloxane (PDMS) based nanocomposite for suppressing electromagnetic ...