Browsing Division of Mechanical Sciences by Title
Now showing items 241-260 of 1799
-
Continuous-Curvature Path Planning Using Four Parameter Logistic Curves
Autonomous vehicles perform time and cost effective operations with minimal or no human effort and hence, have the potential to be used in civilian, commercial and military applications. Pertaining to these applications, ... -
Continuum Analysis of Cavitation Induced Failure and Tensile Deformation Response of Metallic Glasses & Nanoglasses
Metallic glasses (MGs), which are metals solidified in an amorphous state, have shown attractive mechanical properties such as high strength (up to 5 GPa), yield strain (around 2%) and good corrosion resistance. They ... -
Continuum Modeling Of Adhesive Interaction Based On Interatomic Potentials
(2018-01-12)Adhesion between solid bodies plays a prominent role in a wide variety of situations ranging from tribological applications to dust coagulation initiating the formation of planets. It can be due to various reasons like ... -
Control and Safety of Multi-UAV Systems for Collaborative Payload Transportation and Target Tracking
Unmanned aerial vehicles (UAVs) have been widely used in reconnaissance, remote sensing, disaster relief, and agricultural applications. Many applications require multiple UAVs to cooperate to complete the assigned tasks. ... -
Control of shock-induced vortex breakdown in Transonic regime on a slender delta wing body configuration using blowing
Modern high speed aircrafts feature highly swept and low aspect ratio wings, mainly to increase the critical Mach number and reduce the wave drag. A special case of swept wings is wings with triangular planform commonly ... -
Cooling Of Electronics With Phase Change Materials Under Constant Power And Cyclic Heat Loads
(2009-12-14)The trend in the electronic and electrical equipment industry towards denser and more powerful product requires a higher level of performance from cooling devices. In this context, passive cooling techniques such as latent ... -
Correlation Between Microstructure and Corrosion Properties of Electrodeposited Nickel and Zinc Based Coatings
Conventional metallic coatings such as Ni and Zn are extensively used in corrosion protection applications. In most studies on the corrosion behavior of metallic coatings, the emphasis is on correlating morphology and ... -
Correlation Between Structure, Microstructure and Enhanced Piezoresponse Around the Morphotropic Phase Boundary of Bismuth Scandate-Lead Titanate Piezoceramic
(2018-05-11)Piezoelectric materials find use as actuators and sensors in automotive, aerospace and other related industries. Automotive applications such as fuel injection nozzles and engine health monitoring systems require operating ... -
Corrosion And Wear Behaviour of Plasma Electrolytic Oxidation And Laser Surface Alloy Coatings Produced on Mg Alloys
(2017-10-11)In the present investigation, surface coatings employing laser surface alloying (LSA) and plasma electrolytic oxidation (PEO) processes have been prepared on Mg alloys. The coatings have been investigated for corrosion and ... -
Coupled Heat Transfer Processes in Enclosed Horizontal Heat Generating Rod Bundles
(2018-03-24)In a nuclear fuel cask, the heat generating spent fuel rods are packed in a housing and the resulting bundle is placed inside a cask of thick outer shell made of materials like lead or concrete. The cask presents a wide ... -
Crack Tip Fields And Mechanisms Of Fracture In Ductile FCC Single Crystals
(2015-01-07)An understanding of crack tip fields and fracture mechanisms in single crystals can help in developing better polycrystalline alloys and manufacturing processes. To this end, the effects of loading rate, material inertia ... -
Creation of an Orderly Jet and Thrust Generation in Quiescent Fluid from an Oscillating Two-dimensional Flexible Foil
(2018-02-22)In nature, many of the flapping wings and fins in swimming and flying animals have various degrees of flexibility with strong and coupled solid-fluid interactions between the structure and the fluid. In most cases, the ... -
Creep And Grain Boundary Sliding In A Mg-0.7% Al Alloy
(2011-08-25) -
Creep, Wear And Corrosion Behaviour Of Novel Magnesium Alloys And Composites
(2011-04-01)In the present investigation, MMCs have been fabricated using the creep-resistant AE42 magnesium alloy as matrix and reinforcing it with saffil short fibres (essentially δ-Al2O2) and SiC particles in various combinations. ... -
Critical Excitation And Inverse Approach In Random Vibration
(2011-06-22) -
Crustal evolution and tectonic processes of the Madras Block, India
The Neoarchaean (2.8–2.5 Ga) era in the earth’s history witnessed significant crustal growth related to the amalgamation and dispersion of ancient continents. The processes leading to the formation and destruction of the ... -
The Crustal Evolution of Nilgiri Block, Southern India : A Study on Archean Tectonics and Crustal Growth
(2018-08-02)The oldest dated rocks from the Acasta gneisses of the western Slave Province, Canada present an igneous age of ~4030 Ma. Following this the detrital zircons from the Jack Hills, Narryer Gneiss Terrane, Yilgarn Craton, ...