Browsing Division of Mechanical Sciences by Title
Now showing items 184-203 of 1797
-
Charaterization of Sand-Rubber Mixture and Numerical Analysis for Vibration Isolation
(2018-02-20)Scrap tyres provide numerous advantages from the viewpoint of civil engineering practices. Scrap tyres are light weight, have high vibration absorption, high elastic compressibility, high hydraulic conductivity, and ... -
Chemorhelogical Modeling Of Amine-Cured Multifunctional Epoxy Resin Systems Used As Matrices In Aerospace Composites
(Indian Institute of Science, 2005-07-13)High performance multifunctional epoxy resin systems are becoming increasingly important as matrix materials for the advanced composites used in aerospace, electronics, automotive and other industries. In a composite based ... -
CHM (Chemo-Hydro-Mechanical) Behavior of Barmer-1 Bentonite in the Context of Deep Geological Repositories for Safe Disposal of Nuclear Waste
(2018-03-21)Deep geological repository (DGR) for disposal of high-level radioactive waste (HLW) is designed to rely on successive superimposed barrier systems to isolate the waste from the biosphere. This multiple barrier system ... -
Class-F Fly Ash and Ground Granulated Blast Furnace Slag (GGBS) Mixtures for Enhanced Geotechnical and Geoenvironmental Applications
(2018-01-11)Fly ash and blast furnace slag are the two major industrial solid by-products generated in most countries including India. Although their utilization rate has increased in the recent years, still huge quantities of these ... -
Classical Approach to Understanding the Impact Dynamics of Hollow Droplets
Compound droplets are utilized in applications ranging from the preparation of emulsion to biological cell printing and additive manufacturing. Here, we report on the impact dynamics of a compound hollow droplet on a ... -
Climate-resilience of Dwellings in Transition and the Thermal Behaviour of their Inhabitants
Thermal comfort is critical for the well-being, and productivity of the inhabitants. Traditional dwellings constructed using local, low-carbon materials have for decades provided comfortable indoor thermal environment to ... -
Closed-form Solutions For Rotating And Non-rotating Beams : An Inverse Problem Approach
(2012-12-04)Rotating Euler-Bernoulli beams and non-homogeneous Timoshenko beams are widely used to model important engineering structures. Hence the vibration analyses of these beams are an important problem from a structural dynamics ... -
Cloud Properties Over SHAR Region Derived From Weather RADAR Data
(2011-01-18)Weather radars are increasingly used for the study of clouds, understanding the precipitation systems and also for forecasting very short range weather (one hour to a few hours). Now, Doppler Weather Radar (DWR) data are ... -
Co-continuous microstructures through spinodal decomposition in ternary systems: A phase field study
We have studied spinodal decomposition which leads to a three-phase microstructure in ternary alloys using computer simulations based on the ternary Cahn-Hilliard equations. All the alloys we have studied are in the same ... -
Co-operative Destabilization of a Flat Plate Boundary Layer by a Free Stream Convecting Vortex and Wall Suction/Blowing
The stability of wall bounded shear layer at subcritical Reynolds number disturbed by a freestream convecting vortex and unsteady suction/blowing at the wall was studied. A counterclockwise line vortex was convected parallel ... -
CO2 Ventilation, Hydrological Cycle over Southern Ocean and Clumped Isotope Thermometry in Biogenic Carbonates
(2018-02-20)The thesis presents observations on the CO2 concentration and carbon isotopes in air CO2 (δ13C) to constrain the inter-annual variability of carbon inventory over the Southern Ocean between the years 2011-2013. Based on ... -
Coalescence of Polymeric Droplets
Coalescence is an energy minimization phenomenon in which two equilibrium droplets undergo a transition to attain a final equilibrium state, i.e., a coalesced state. Coalescence begins with a point contact between the ... -
Cold Model Study Of Formation And Breaking Of Raceway
(Indian Institute of Science, 2005-12-22)The raceway in the ironmaking blast furnace is a void in front of the hot blast tuyeres where coke and supplementary fuel burn to supply heat to the ironmaking process. The air velocity through the tuyeres is high (around ... -
A Cold Model study Of Raceway Hysteresis
(2011-08-24) -
Collapse Behaviour Of Red Soils Of Bangalore District
(Indian Institute of Science, 2006-07-17)Collapse phenomenon is exhibited by two types of residual soils. The first category of collapsing residual soils is believed to be transported soils that have undergone post-depositional pedogenesis. The second category ... -
Collision Avoidance And Coalition Formation Of Multiple Unmanned Aerial Vechicles In High Density Traffic Environments
(2014-08-07)This thesis addresses the problems of collision avoidance and coalition formation of multiple UAVs in high density traffic environments, proposes simple and efficient algorithms as solutions, and discusses their applications ... -
Combustion Instability Screech In Gas Turbine Afterburner
(2009-08-04)Gas turbine reheat thrust augmenters known as afterburners are used to provide additional thrust during emergencies, take off, combat, and in supersonic flight of high-performance aircrafts. During the course of reheat ... -
Comparative Studies On Slope Stability Analysis
(2012-02-16) -
A Comparative Study Of Different Numerical Techniques Used For Solving Incompressible Fluid Flow Problems
(2010-06-03)Past studies (primarily on steady state problems) that have compared the penalty and the velocity-pressure finite element formulations on a variety of problems have concluded that both methods yield solutions of comparable ...