Browsing Division of Mechanical Sciences by Title
Now showing items 171-190 of 1799
-
Characteristics of Convective Clouds Over the Indian Monsoon Zone from Weather Radar Data
Deep convective clouds play an important role in global energy balance through vertical transport of water vapor, momentum and energy, altering radiation and also influence hydrological cycle via precipitation. These clouds ... -
Characterization and Assessment of Organically Modified Clays for Geo Environmental Applications
(2018-04-11)Clays are used for long for the control of soil and water pollution as they are inexpensive natural materials with a high adsorption capacity for a wide range of pollutants. However their use as components in engineered ... -
Characterization and Control of Boundary Layer Transition Caused by Distributed Surface Roughness
Distributed roughness occurs over a variety of aerodynamic surfaces such as wind-/gas-turbine blades and aircraft wings in the form of dust, insect strikes, fouling or icing. The disturbances introduced by the roughness ... -
Characterization And Lime Stabilization Studies On Artificially Lead Contaminated Soils
(2011-07-08)Hazardous waste substances are solid, semi-solid or non-aqueous liquids that exhibit characteristics of corrosivity, reactivity, ignitability, toxicity and infectious property. Major available options for management of ... -
Characterization of a large scale hypersonic shock tunnel and investigation of the effect of roughness on a large cone boundary layer flow
High speed flight is ridden with engineering challenges, some of which have been studied for decades with only minor improvements. Boundary layer transition to turbulence in highMach number flow is one such topic, which, ... -
Characterization Of Al-Si Alloy Engine Bores For Tribological Studies
(2013-06-06)Aluminum - Silicon alloys are recognized as appropriate materials for high performance cast components used in transportation powertrain applications. A combination of excellent wear resistance, good thermal conductivity ... -
Characterization of Corneal Lens of Drosophila melanogaster and its Genetic Mutants using Atomic Force Microscope and Scanning Electron Microscope
Drosophila melanogaster (the fruit fly) is a widely used model organism for the study of human disease condition and genetic pathways due to the high degree of gene conservation between fly and human. The compound eyes of ... -
Characterization of Cure Residual Strain in CFRPs
Fiber reinforced plastic (FRP) structures are widely used compared to metallic structures due to their superior mechanical properties and lightweight. However, anisotropy and heterogeneity inherent to FRPs cause a multitude ... -
Characterization of Different Slags for Bulk Geotechnical Applications
(2018-05-29)Generation of wastes in the form of liquid, solid or gas is inevitable in any industry.Industrial Solid Waste is the waste that is generated from an industrial or manufacturing process and includes the waste generated from ... -
Characterization of Flow Induced Noise Received by an Array Placed at Stagnation Point of an Underwater Axisymmetric Body
(2018-07-09)Given the interest on underwater axisymmetric cylindrical bodies for the development of high-speed underwater weapons, characterization of the boundary layer flow-induced noise received by a Sound NAvigation and Ranging ... -
Characterization of high enthalpy flows in the IISc free-piston driven shock tunnel using Two-Colour Ratio Pyrometry
High temperature and its associated effects set the hypersonic flow regime apart from other class of flows. Viscous dissipation raises the internal energy of the high-kinetic-energy gas as it slows down in the boundary ... -
Charaterization of Sand-Rubber Mixture and Numerical Analysis for Vibration Isolation
(2018-02-20)Scrap tyres provide numerous advantages from the viewpoint of civil engineering practices. Scrap tyres are light weight, have high vibration absorption, high elastic compressibility, high hydraulic conductivity, and ... -
Chemorhelogical Modeling Of Amine-Cured Multifunctional Epoxy Resin Systems Used As Matrices In Aerospace Composites
(Indian Institute of Science, 2005-07-13)High performance multifunctional epoxy resin systems are becoming increasingly important as matrix materials for the advanced composites used in aerospace, electronics, automotive and other industries. In a composite based ... -
CHM (Chemo-Hydro-Mechanical) Behavior of Barmer-1 Bentonite in the Context of Deep Geological Repositories for Safe Disposal of Nuclear Waste
(2018-03-21)Deep geological repository (DGR) for disposal of high-level radioactive waste (HLW) is designed to rely on successive superimposed barrier systems to isolate the waste from the biosphere. This multiple barrier system ... -
Class-F Fly Ash and Ground Granulated Blast Furnace Slag (GGBS) Mixtures for Enhanced Geotechnical and Geoenvironmental Applications
(2018-01-11)Fly ash and blast furnace slag are the two major industrial solid by-products generated in most countries including India. Although their utilization rate has increased in the recent years, still huge quantities of these ... -
Classical Approach to Understanding the Impact Dynamics of Hollow Droplets
Compound droplets are utilized in applications ranging from the preparation of emulsion to biological cell printing and additive manufacturing. Here, we report on the impact dynamics of a compound hollow droplet on a ... -
Climate-resilience of Dwellings in Transition and the Thermal Behaviour of their Inhabitants
Thermal comfort is critical for the well-being, and productivity of the inhabitants. Traditional dwellings constructed using local, low-carbon materials have for decades provided comfortable indoor thermal environment to ... -
Closed-form Solutions For Rotating And Non-rotating Beams : An Inverse Problem Approach
(2012-12-04)Rotating Euler-Bernoulli beams and non-homogeneous Timoshenko beams are widely used to model important engineering structures. Hence the vibration analyses of these beams are an important problem from a structural dynamics ...