Browsing Materials Engineering (MatEng) by Title
Now showing items 94-113 of 311
-
Exotic eutectic microstructures
Solidification of eutectic systems delivers compelling examples of microstructure formation, which makes the phenomena intriguing to many engineers and scientists. Therefore, eutectic solidification is extensively studied ... -
Experimental and Numerical Investigation on Friction Welding of Thixocast A356 Aluminium Alloy
(2017-12-01)The challenges of weight reduction and good strength in automotive industry have drawn considerable interest in thixocasting technologies. Joining of such components with conventional fusion welding creates voids, hot ... -
Experimental Study of Multiphase Flow in the Presence of Raceway in the Packed Beds
The lower part of the iron-making blast furnace is very important for operational stability and productivity of it. It represents a multiphase flow, including a cohesive zone. In order to reduce the coke consumption and ... -
Extraction of Creep Parameters from Indentation Creep Experiment: An Artificial Neural Network- Based Approach
Conventional methods for extracting creep properties require conducting several uniaxial tests at different loads, which consumes an intensive amount of material and time. Indentation may minimize the material volume ... -
Extraction of Equivalent Uniaxial Plastic and Viscoplastic Behavior from Bending Using a Mechanistic Approach
The present work is aimed at the extraction of material’s yield and creep parameters using cantilevers by conducting constant deflection rate and constant load tests respectively. Under the assumption of Euler-Bernoulli’s ... -
Extrusion Processing Of Aluminium-Lithium Alloy 1441
(2012-11-19) -
Fatigue Damage Characterization Of Carbon/Epoxy Laminates Under Spectrum Loading
(2013-10-04)Fibre Reinforced Polymer Composites are extensively used in aircraft structures because of its high specific stiffness, high specific strength and tailorability. Though Fibre Reinforced Polymers offer many advantages, they ... -
First Principles Study Of Structure And Stacking Fault Energies In Some Metallic Systems
(2010-08-05)Plastic deformation in crystalline materials largely depends on the properties of dislocations, in particular their mobility. While continuum description of deformation of a crystalline metal can be made reasonably well ... -
First-Principles Studies of Point Defects and Phase Transformations in Materials
(2018-01-18)The functional and mechanical properties of a material are often determined by the defects in them. A thorough understanding of the relationship between the defects and the properties allows for tailoring a material’s ... -
Fracture and Deformation in Bulk Metallic Glasses and Composites
(2018-01-11)Plastic flow in bulk metallic glasses (BMGs) localizes into narrow bands, which, in the absence of a microstructure that could obstruct them, propagate unhindered under tensile loading. In constrained deformation conditions ... -
A Fundamental Investigation Of Discrete Liquid, Gas And Fines Flow In A Random Packed Bed Along With Applications
The discontinuous nature of liquid flow in a random packed bed is observed in many chemical engineering and metallurgical applications like blast furnace and heap leaching. So, to model the liquid flow in these systems, ... -
Grain Boundary Processes In High Temperature Densification And Deformation Of Nanocrystalline Zirconia
(2011-02-08)Grain boundary processes play a major role in controlling different rate processes in yttria stabilized tetragonal zirconia. The present study concentrated on rate processes in tetragonal zirconia, which were significantly ... -
Graphene derivatives sandwiched with porous polyvinylidene fluoride based thin film composite membranes for effective water remediation
Safe drinking water for all is perhaps one of the prime nexus of the 21st century and one of the prime sustainable development goals. Around 1.2 billion people still lack access to safe potable water, while around 2.6 ... -
Heat Treatment and Surface Engineering of Selective Laser Melted Ti-6Al-4V for Improved Performance in Biomedical Implants
Metals and alloys are extensively used to prepare a wide variety of biomedical implants. The commonly employed materials are stainless steel (SS), cp-Ti, Ti-6Al-4V, etc., because of their biocompatibility and corrosion ... -
High-Throughput Bending Tests for Investigating Creep Behavior Affected by Structural and Microstructural Inhomogeneities
The bending of cantilevers is an alternate technique for the extraction of power-law creep parameters of materials. It has been shown earlier that in homogeneous systems showing tension-compression symmetry, digital image ...