Browsing Materials Engineering (MatEng) by Title
Now showing items 271-290 of 311
-
Study Of Friction And Wear Behaviour Of Nano-Embedded Aluminium Alloys
(Indian Institute of Science, 2005-12-22)In general, the bearing alloys have two types of microstructure i.e., either a soft matrix with discrete hard particles or a continuous matrix of the harder metal with small amount of the softer metal finely dispersed in ... -
Study of gas-fine flow in a packed bed with an application to the ironmaking blast furnace
The iron and steelmaking industry uses coal as the primary reducing agent. The carbon that is the major component of coal is finally released into the environment as carbon dioxide. One of the effective ways to reduce the ... -
Study Of Gas-Liquid Flow Behaviour In Raceway Zone Under Pulverised Coal Injection
(2011-02-09)Gas, liquid and powder flow in the lower part of a blast furnace is complex phenomena. In order to understand the aerodynamics of the blast furnace properly, these phenomena must be included in their advanced form. Previous ... -
Study Of Surface Ordering And Disordering
(2012-01-13) -
Study on Development of Aluminium Based Metal Matrix Composites Using Friction Stir Processing
(2018-05-14)Composite materials are multifunctional materials having unique mechanical and physical properties that can be tailored to meet the requirements of a particular application. Aluminium based Metal Matrix Composites (MMC) ... -
Study On Reactive Hot Pressing Of Zirconium Carbide
(2017-04-27)Group IV transition metal carbides are promising materials for high temperature structural application, due to their unique sets of properties such as high melting temperature, high temperature strength, hardness, elastic ... -
Studying the effect of Re on the Co-Ni-Al-Ti-Nb-Cr superalloy’s coarsening kinetics and establishing the high-throughput diffusion couple approach for alloy design
The studies are conducted to understand the effect of Re addition on microstructural evolution and coarsening kinetics of new Co-Ni-Al-Ti-Nb-Cr based superalloys. Lattice misfit is reduced by adding Re, confirmed from ... -
Superplastic Deformation Behaviour Of AZ31 Magnesium Alloy
(2009-05-29)Superplastic deformation behaviour of AZ31 magnesium alloy having initial grain sizes 8, 11 and 17μm alloy was investigated at 673 K with initial strain rates ranging from 1x10-2 to 1x10-4 s-1. Mechanical data on fine ... -
Symmetry-Breaking Transitions In Equilibrium Shapes Of Coherent Precipitates
(Indian Institute of Science, 2005-12-22)We present a general approach for determining the equilibrium shape of isolated, coherent, misfitting particles by minimizing the sum of elastic and interfacial energies using a synthesis of finite element and optimization ... -
Synergistic Effect of Electromagnetic Forces on the Failure of Pre-Cracked Thin Metallic Conductors
Finite element method (FEM) simulations were performed, and distributions of current density, electromagnetic force, and stress fields due to the self induced electromagnetic forces were evaluated in a pre-cracked thin ... -
Synthesis and Characterization of Functionalized Electroactive Polymers for Metal Ion Sensing
(2018-02-06)Metal ion contamination in surface and ground water is a major threat as it has a direct implication on the health of terrestrial and aquatic flora and fauna. Lead (Pb2+), mercury (Hg2+), cadmium (Cd2+), nickel (Ni2+), ... -
Synthesis and Characterization of Intermetallic Coatings by Laser Cladding and Novel Ball Milling Approach
The aim of the present work is to engineer a new kind of coating material with superior quality and reliability in a cost effective way by laser cladding and ball milling process. Non equilibrium processing methods were ... -
Synthesis and Phase Transformation Studies of Al45Mn55 Ferromagnetic Heusler Alloy
The aim of the present thesis work was to synthesize and explore the phase transformation behavior of a binary Heusler alloy based on AlMn system. The intermetallic phase with the stoichiometry AlMn, which is usually termed ... -
Synthesis And Study Of Microstructure Evolution In Nanoparticles Of Immiscible Alloys By Laser Ablation Under Liquid Medium
(2017-05-21)The present thesis deals with synthesis of free alloy nanoparticles in immiscible alloy systems by the process of laser ablation under a liquid. In this process the alloy target is submerged in a liquid and the plume formed ... -
Synthesis and Transformation of AuCu Intermetallic Nanoparticles
(2018-04-16)Investigations on size dependent phase stability and transformations in isolated nanoparticles have gained momentum in recent times. Size dependent phase stability generates size specific particle microstructure which ... -
Synthesis, Microstructural Stability and High Temperature Deformation of Alumina-Carbon Nanotube Composites
Structural ceramics such as alumina are known to have excellent hardness and high temperature mechanical properties. In view of this, they are used as refractory linings to mitigate the effect of high temperature exposure. ...