Browsing Materials Engineering (MatEng) by Title
Now showing items 215-234 of 311
-
Processing And Characterisation Of Bulk Al2 O3 p /AIN-Al Composites By Pressureless Infiltration
(Indian Institute of Science, 2005-12-22)Al-Mg alloys were infiltrated into porous alumina preforms at temperatures greater than 950°C where significant amount of nitride forms in the matrix. The present work aims to obtain a process window for growing A1N rich ... -
Processing And Characterization Of B4C Particle Reinforced Al-5%Mg Alloy Matrix Composites
(Indian Institute of Science, 2005-12-22)Metal matrix composites (MMCs) are emerging as advanced engineering materials for application in aerospace, defence, automotive and consumer industries (sports goods etc.). In MMCs, a metallic base material is reinforced ... -
Processing And High Temperature Deformation Of Pure And Magnesia Doped Alumina
(Indian Institute of Science, 2005-12-22)Creep resistance is an important design criterion at high temperatures especially when continuous attempts are made to increase the efficiencies by increasing the operating temperatures. Alumina is an important high ... -
Processing Of Zirconia Based Honeycombs And Evaluation Of Thermo Mechanical Properties
(2010-08-16)Ceramic cellular solids, mainly honeycombs and foams, are a novel class of composite materials where one phase is an interconnected network of solid struts or plates and the other one an empty phase or possibly a fluid. ... -
Processing, Characterization And Evaluation Of A Functionally Graded Ai - 4.6% Cu Alloy
(Indian Institute of Science, 2005-12-22)In some applications the stress across the entire cross-section of a component is not uniform but varies with position. For example, maximum shear stress is highest at the inner surface of a thick-walled cylinder subjected ... -
The Processing, Consolidation And Deformation Behavior Of Bulk Amorphous AI2O3-Y2O3 Ceramics
(2011-07-08)Processing of Bulk Metastable Oxide Ceramics Oxide ceramic materials are extensively used in various modern application domains which require properties such as high temperature stability or creep resistance, wear ... -
Pseudo-binary and Pseudo-ternary diffusion couple methods for understanding the growth of interdiffusion zone between bond coat and superalloys
Ni-based superalloys are widely used in jet engine applications. Bond coats are applied to these alloys for protection during service in a very harsh environment at high operating temperature. The addition of Pt to the ... -
Pulsed Laser Ablation Deposition of Intermetallic Thin Films: A Study of Evolution of Metastable Phases and Ultra-fine Microstructures
(Indian Institute of Science, 2005-07-27)This thesis is devoted to the deposition of intermetallic thin films by laser ablation deposition (LAD) and their characterization. Pulsed laser ablation and subsequent deposition of the ablated vapours produces films under ... -
Reactive Hot Pressing Of ZrB2-Based Ultra High Temperature Ceramic Composites
(2010-10-08)Zirconium- and titanium- based compounds (borides, carbides and nitrides) are of importance because of their attractive properties including: high melting temperature, high-temperature strength, high hardness, high elastic ... -
Role Of Boron On The Evolution Of Microstructure And Texture In Ti-6AL-4V-0.1B Alloy
(2013-06-04)Titanium and its alloys constitute an important class of materials for aerospace, biomedical, and chemical industries, primarily due to their high specific strength and fracture toughness with good corrosion resistance. ... -
Role of in-phase octahedral tilt influencing structure and properties in Na0.5Bi0.5TiO3 - based piezoceramics
High performance perovskite (ABO3) based piezoceramics are used as actuators, pressure sensors, and transducers in wide-ranging applications spanning sectors like health, space, defence and automobiles. For over four ... -
Role Of Interfacial Phenomena In Bioprocessing Of Minerals Using Bacillus Polymyxa
(Indian Institute of Science, 2006-12-11)In recent years there has been growing interest in bio-mineral processing due to its low operating costs and its application in processing lean-grade ores. Bioprocessing is a good alternative to conventional hydrometallurgy ... -
The role of polymer phase on rigidity percolation of ABS−spherical nickel microparticles composites
Percolation and rigidity transitions are very important phenomena in random heterogeneous microstructures, as various physical properties change abruptly at some critical volume fractions of one phase. The concepts of ... -
Role Of Stacking Fault Energy On Texture Evolution In Micro- And Nano-Crystalline Nickel-Cobalt Alloys
(2017-05-24)Plastic deformation of metals and alloys are invariably accompanied by the development of texture. The origin of texture is attributed to the deformation micro-mechanisms associated with processing. The face-centered cubic ... -
Silk-based Biomaterials for Wound Care and Tissue Regeneration
For most individuals, wound healing is a highly organized, straightforward process. However, there are instances where external intervention becomes necessary to support the body’s innate healing mechanism. In this thesis, ...