Browsing Materials Engineering (MatEng) by Title
Now showing items 209-228 of 311
-
Polyvinylidene fluoride (PVDF) based Nanocomposites with Multi-layered Architecture Containing Core-shell Nanomaterials for Electromagnetic Interference Shielding
With the emergence of smart electronic devices, we have witnessed a rapid surge in the growth and subsequent drive-in for the miniaturization of electronic interfaces. Any electronic gadget that transmits, distributes, or ... -
Potential Applications of Snail Mucus in Cartilage Repair and Fabrication of Porous 3D Scaffolds
Articular cartilage damage is a major challenge in orthopedics. This medical condition is exacerbated by the cartilage's inability to self-repair due to the non-vascularization of the tissue and many other factors. Several ... -
Precipitate Growth and Coarsening in Ternary Alloys
(2018-08-20)We have studied precipitate growth and coarsening in ternary alloys using two different phase held models. The first one is a ternary extension of the classical Cahn-Hilliard (C-H) model in which both the phases are ... -
Precipitate Growth Kinetics : A Phase Field Study
(2011-08-30) -
Printed and Low Temperature Processed Oxide Electronics with Superior Electrical Performance and Mechanical Reliability
In line with the forthcoming industrial revolution, printed and flexible electronics is a rapidly developing research area that involves wearable and consumer electronics to be produced in large quantities and be connected ... -
Processing And Characterisation Of Bulk Al2 O3 p /AIN-Al Composites By Pressureless Infiltration
(Indian Institute of Science, 2005-12-22)Al-Mg alloys were infiltrated into porous alumina preforms at temperatures greater than 950°C where significant amount of nitride forms in the matrix. The present work aims to obtain a process window for growing A1N rich ... -
Processing And Characterization Of B4C Particle Reinforced Al-5%Mg Alloy Matrix Composites
(Indian Institute of Science, 2005-12-22)Metal matrix composites (MMCs) are emerging as advanced engineering materials for application in aerospace, defence, automotive and consumer industries (sports goods etc.). In MMCs, a metallic base material is reinforced ... -
Processing And High Temperature Deformation Of Pure And Magnesia Doped Alumina
(Indian Institute of Science, 2005-12-22)Creep resistance is an important design criterion at high temperatures especially when continuous attempts are made to increase the efficiencies by increasing the operating temperatures. Alumina is an important high ... -
Processing Of Zirconia Based Honeycombs And Evaluation Of Thermo Mechanical Properties
(2010-08-16)Ceramic cellular solids, mainly honeycombs and foams, are a novel class of composite materials where one phase is an interconnected network of solid struts or plates and the other one an empty phase or possibly a fluid. ... -
Processing, Characterization And Evaluation Of A Functionally Graded Ai - 4.6% Cu Alloy
(Indian Institute of Science, 2005-12-22)In some applications the stress across the entire cross-section of a component is not uniform but varies with position. For example, maximum shear stress is highest at the inner surface of a thick-walled cylinder subjected ... -
The Processing, Consolidation And Deformation Behavior Of Bulk Amorphous AI2O3-Y2O3 Ceramics
(2011-07-08)Processing of Bulk Metastable Oxide Ceramics Oxide ceramic materials are extensively used in various modern application domains which require properties such as high temperature stability or creep resistance, wear ... -
Pseudo-binary and Pseudo-ternary diffusion couple methods for understanding the growth of interdiffusion zone between bond coat and superalloys
Ni-based superalloys are widely used in jet engine applications. Bond coats are applied to these alloys for protection during service in a very harsh environment at high operating temperature. The addition of Pt to the ... -
Pulsed Laser Ablation Deposition of Intermetallic Thin Films: A Study of Evolution of Metastable Phases and Ultra-fine Microstructures
(Indian Institute of Science, 2005-07-27)This thesis is devoted to the deposition of intermetallic thin films by laser ablation deposition (LAD) and their characterization. Pulsed laser ablation and subsequent deposition of the ablated vapours produces films under ... -
Reactive Hot Pressing Of ZrB2-Based Ultra High Temperature Ceramic Composites
(2010-10-08)Zirconium- and titanium- based compounds (borides, carbides and nitrides) are of importance because of their attractive properties including: high melting temperature, high-temperature strength, high hardness, high elastic ...