Browsing Division of Mechanical Sciences by Title
Now showing items 781-800 of 1799
-
Influence of surface topography on wear and debris morphology of polymers
The artificial knee and hip joints comprise a polymer-metal tribological system where soft polymers slide against hard metallic surfaces. When a polymer slides on it, the micro hard asperities remove the polymers in the ... -
Influence of Western Ghats Orography on Temporal and Spatial Distribution of Rainfall over South Asia
The Western Ghats (WG) orography that runs along the western coast of peninsular India, is a long and narrow mountain chain with an average height of about 1200 meters. The orientation of this orography is approximately ... -
Information Extraction and Mapping for Populating Ontologies in Product Lifecycle Management
Computer-based tools used to manage a product's lifecycle from the cradle to the grave need to share product information across phases. If this information is well structured, accessing, and manipulating such information ... -
Inkjet-Printed Ag Nanomaterials based Strain Sensors for Wearable Sensing Applications
Of late, the demand of wearable sensors has exponentially risen. For example, strain sensors that can be worn and are skin mountable play a significant role in the areas of human motion detection, healthcare, soft robotics, ... -
Inkjet-Printed Co-continuous Mesoporous Oxides for Surface Dominated Functional Devices
Over the last few decades, printed and flexible electronics have emerged as a major area of research, which may cater multiple domains of application requirements for the forthcoming industrial revolution. The solution ... -
Inkjet-printed high performance oxide electronics and its application at sensor interfaces
Over the last two decades, printing of oxide semiconductors has received special attention due to its advantages such as low processing temperature, even at room temperature; high electron mobility; good transparency due ... -
Innovative Optimal Guidance of Spacecrafts for Soft-Landing on Atmosphere-less Celestial Bodies
Nonlinear trajectory optimization based optimal guidance schemes are presented in this thesis for soft-landing of spacecrafts on atmosphere-less celestial bodies. First, a pseudo-spectral philosophy based multi-phase ... -
Insights into evaporation, atomization and precipitate formation of polymer droplets
Evaporation of polymer droplets is an active area of interest due to its applications in systems such as ink jet printing, thin films, spray combustors to name a few. Thus, understanding complex dynamics of evaporating ... -
Insights into Instabilities in Burning and Acoustically Levitated Nanofluid Droplets
(2018-07-16)The complex multiscale physics of nanoparticle laden functional droplets in a reacting environment is of fundamental and applied significance for a wide variety of applications ranging from thermal sprays to pharmaceutics ... -
Insights into the Influence of Electric Field on the Structural Evolution and its Correlation with the Properties in the Lead-based BiScO3-PbTiO3 and the Lead-free Na0.5Bi0.5TiO3 based Piezoceramics
Advanced piezoelectric ceramics are widely used as piezoelectric sensors, transducers, actuators, etc. Among the commercially viable piezoelectric systems, lead zirconate titanate, PbZr1-XTiXO3 (PZT) has dominated the ... -
Insights of Evaporation Dynamics of an Interacting Linear Array of Droplet System
Manipulation of an array of sessile droplets organized in an ordered structure turns out to be of immense consequence in a wide variety of applications ranging from photonics, near field imaging and inkjet printing on one ... -
Instabilities In Supersonic Couette Flow
(2010-07-15)Compressible plane Couette flow is studied with superposed small perturbations. The steady mean flow is characterized by a non-uniform shear-rate and a varying temperature across the wall-normal direction for an appropriate ... -
Installation and Operation of Air-Sea Flux Measuring System on Board Indian Research Ships
(2018-07-04)Exchange of mass (water vapor), momentum, and energy between atmosphere andocean has profound influence on weather and climate. This exchange takes place at the air-sea interface, which is part of the marine ... -
Integrability Evaluation Methodology for Building Integrated Photovoltaic's (BIPV) : A Study in Indian Climatic Conditions
(2018-01-02)India’s geographical location renders it with ample solar-energy potential ranging from 4-7 kWh/m2 daily and 2,300–3,200 sunshine hours annually. The diverse nature of human settlements (scattered low-rise to dense high-rise) ... -
An Integrated Choice and Latent Variable Framework to Incorporate the Influence of Travel Time Variability on Truck Route Choice
Route choice models (or path choice models) are useful for quantifying travellers’ preferences for or sensitivity to route attributes, predicting network-level traffic flows, examining the influence of information provided ... -
An Integrated Estimation-Guidance Approach for Seeker-less Interceptors
(2018-07-16)In this thesis, the problem of intercepting highly manoeuvrable threats using seeker-less interceptors that operate in the command guidance mode, is addressed. These systems are more prone to estimation errors than standard ... -
An Integrated Framework for Supporting Decision Making During Early Design Stages on End-of-Life Product Disassembly
(2017-10-31)Product life cycle (PLC) is the cycle which every product goes through from introduction to eventual demise. There are several issues with the current life cycle of a product when looked from the environmental impact ... -
Integrated Relative Position and Attitude Control of Distributed Spacecraft Formation For High Resolution Imaging
One of the major challenges in space technology is to achieve high resolution imaging of the intended area on demand to meet civilian and military applications. Spacecraft formation flying with coordinated control of smaller ... -
Integrated Wastewater Management for Tank Restoration in Urban Fringe Areas
Urban fringe water bodies are often seriously affected by urban wastewater including partially treated sewage entering it and degrading it. Sustainability requirements necessitate that such wastewaters are treated and ... -
Integrating Product Model With Assembly Process Model Using Liaisons
(2014-04-09)This thesis addresses the problem of achieving better convergence between different phases (here design and manufacturing) of the product development cycle. The use of liaison has been proposed to better integrate the ...