Browsing Division of Mechanical Sciences by Title
Now showing items 504-523 of 2275
-
Dynamics of Leidenfrost droplets on microtextured substrates
A liquid droplet placed on a heated substrate at temperatures significantly higher than the saturation temperature of the liquid levitates over a thin film of vapor and is termed as a Leidenfrost (LF) droplet. Leidenfrost ... -
Dynamics of river plumes in the Bay of Bengal
The Bay of Bengal (BoB) receives a large amount of freshwater through runoff from sev- eral rivers along its border. This large freshwater gain has severe implications on the dynamics and thermodynamics of the BoB as ... -
Dynamics of Single Shallow Arches and Statics of Connected Shallow Arches and their Applications
The methods developed in this thesis enable computationally efficient dynamic analysis of shallow arches. They also facilitate insightful design of arches for different applications. The first design study considers ... -
Dynamics of Summer Monsoon Current around Sri Lanka
(2018-05-21)Summer monsoon current (SMC) in the north Indian Ocean (NIO) is an open ocean current that flows eastward and enter into Bay of Bengal (BoB) during southwest monsoon (June–September). South of Sri Lanka, the SMC turns ... -
Dynamics Of Water Drops Impacting Onto The Junction Of Dual-Textured Substrates Comprising Hydrophobic And Hydrophilic Portions
(2014-11-24)The research topic of liquid drop interaction with solid surfaces is being actively pursued to gain in-depth understanding of several practical cases such as the impingement of fuel spray droplets on surfaces like combustion ... -
Ecology of the terrestrial carbon cycle: Influence of climate and animals
The terrestrial carbon (C) cycle involves fluxes between multiple pools that determine ecosystem functions and regulate global climate. These fluxes and pools are influenced by changes in abiotic (temperature, precipitation ... -
Edge Effect of Semi-Infinite Rectangular Posts on Impacting Drops
(2018-05-30)The inhibiting effect of a sharp edge on liquid spreading is well observed during drop interaction with textured surfaces. On groove-textured solid surfaces comprising unidirectional parallel grooves, the edge effect of ... -
Effect of a Mesh on Boundary Layer Transition Induced by Free-stream Turbulence and an Isolated Roughness Element
(2018-06-23)A high level of free-stream turbulence and surface roughness are known to cause breakdown of an otherwise stable laminar flow. In transition induced by free-stream turbulence, streaks are formed due to the lift-up effect ... -
Effect Of Atomic Mobility In The Precipitate Phase On Coarsening : A Phase Field Study
(2010-10-28)In this thesis, we have used a phase field model for studying the effect of atomic mobility inside the precipitate phase on coarsening behaviour in two dimensional (2D) systems. In all the available coarsening theories, ... -
Effect of Cobalt Content on Microstructure and Strength in Severely Cold Drawn Ni-Co wires
The future upcoming technologies in aerospace, transport and nuclear industries demand materials with superior mechanical properties that are also economically viable. The quest to achieve theoretical strength of material ... -
Effect of Convection and Shrinkage on Solidification and Microstructure Formation
(2017-11-24)Understanding the fundamental mechanisms of solidification and the relative significance of different parameters governing these mechanisms is of vital importance for controlling the evolution of microstructure during ... -
Effect of convex transverse surface curvature on transition and other properties of incompressible boundary layer.
A study of the incompressible boundary layer with transverse surface curvature has been made with particular reference to transition from laminar to turbulent flow. Calculations based on linearised hydrodynamic stability ... -
Effect of Copper on Strength of Super 304H Austenitic Stainless Steel
Super 304H is a copper-containing austenitic stainless steel with potential applications in advanced thermal power plants owing to its superior corrosion, oxidation, creep resistances and cost affordability. The addition ... -
Effect Of Cross-sectional Nonlinearities On Anisotropic Strip-based Mechanisms
(2013-05-28)The goal of this work is to develop and demonstrate a comprehensive analysis of single and multi-body composite strip-beam systems using an asymptotically-correct geometrically nonlinear theory. The comprehensiveness ... -
Effect of Cyclic Strain Path And Vibration Cycles on Shear Modulus And Damping of Sand
(2017-09-23)The soil strata is often subjected to various kinds of vibrations such as that caused by earthquakes, water waves, traffic loads, wind power plants, construction related equipments, pile driving and vibratory machines. The ... -
Effect of Electric Current Pulses on Pre-cracked Thin Metallic Conductors: From Crack Propagation to Healing of Cracks
Both scientifically and technologically, it is important to investigate the effects of electric current on the structural integrity of metallic components. As an electric current reverses its direction across a crack, ... -
The Effect Of Energy Deposition In Hypersonic Blunt Body Flow Field
(2010-09-23)A body exposed to hypersonic flow is subjected to extremely high wall heating rates, owing to the conversion of the kinetic energy of the oncoming flow into heat through the formation of shock waves and viscous dissipation ... -
Effect of Extractives and Crude Proteins on the Kinetics of Hydrolysis in a Solid State Bio-Reactor
(2018-04-18)Polymer hydrolysis is the first (and rate limiting) step for biomethanation of heterogeneous biomass feedstock’s. Satisfactory hydrolysis has been difficult to achieve, understand and predict adequately, to run anaerobic ...