Mechanical Engineering (ME): Recent submissions
Now showing items 221-240 of 387
-
Systematic Synthesis And Analysis Of Multi-DOF Toggle Mechanisms For Electrical Switches
(2015-12-07)Electrical switches are ubiquitous. Performance requirement for a switch is stringent. The operating mechanism mostly decides the performance of an electromechanical switch. However, design of such mechanisms, which involve ... -
Study Of Stall Flutter Of An Isolated Blade In A Low Reynolds Number Incompressible Flow
(2015-07-08)Highly-loaded turbomachine blades can stall under off-design conditions. In this regime, the flow can separate close to the leading edge of the blade in a periodic manner that can lead to blade vibrations, commonly referred ... -
Crack Tip Fields And Mechanisms Of Fracture In Ductile FCC Single Crystals
(2015-01-07)An understanding of crack tip fields and fracture mechanisms in single crystals can help in developing better polycrystalline alloys and manufacturing processes. To this end, the effects of loading rate, material inertia ... -
Studies On Automization And Sprays Of Plant Oil Biofuels Using Laser-Based Diagnostics
(2014-12-12)Atomization characteristics of liquid fuel sprays control combustion efficiency and emissions in engines. The present work is motivated by the need to study the atomization and spray structure of vegetable oil biofuels for ... -
Single-Phase And Multi-Phase Convection During Solidification Of Non-eutectic Binary Solutions
(2014-10-20)During solidification of non-eutectic alloys, non-isothermal phase change causes dendritic growth of solid front with liquid phase entrapped within the dendritic network producing the mushy region. Solidification causes ... -
Development And Performance Evaluation Of An Indirect Evaporative Air Cooler
(2014-09-09)Evaporative cooling is an alternative and efficient method of cooling in dry climates. When a liquid evaporates into the surrounding gas, the energy required for the change of phase produces a cooling effect. The wet bulb ... -
Microstructure Evolution In Semisolid Processing
(2014-09-09)In this thesis, we present an experimental and numerical study of globularization during reheating of thixocast billet having non-dendritic microstructure. The process of reheating is an important step in the semisolid ... -
Thermodynamic Analysis And Simulation Of A Solar Thermal Power System
(2014-05-21)Solar energy is a virtually inexhaustible energy resource, and thus, has great potential in helping meet many of our future energy requirements. Current technology used for solar energy conversion, however, is not cost ... -
Multi-Phase Modeling Of Microporosity And Microstructures During Solidification Of Aluminum Alloys
(2014-04-23)Manufacturing of light-weight materials is associated with several types of casting defects during solidification. Porosity defects are common, especially in aluminum and its alloys, which initiate crack propagation and ... -
Force Measurements On Rigid And Flexible Oscillating Foils
(2013-10-04)In the present work, we experimentally study thrust generation from sinusoidally pitched rigid and flexible foils immersed in a uniform flow. The flexible foils are made by attaching a flexible flap of known flexural ... -
Fuel Filim Visualization And Measurement In The Inlet Manifold Of A Carbureted Spark-Ignition Engine
(2013-10-01)In order to meet future emission norms for small carbureted SI engines, such as those used on motorcycles in India, there is a need to study mixture preparation, specifically the two-phase flow exiting the carburetor and ... -
In Situ Transmission Elecron Microscope Triboprobe For Tribological Studies Of Materials At Nanoscale
(2013-09-10)In most of the tribological experiments studying friction and wear behaviour, the contact interface is hidden. The present work attempts to overcome this hidden-interface problem by carrying out real-time tribological ... -
Measurement And Analysis Of Friction Induced By A Cutting Operation Lubricated By Oil In Water Emulsion
(2013-09-05)The lubricants that are applied during metal cutting acts on the interface between the tool and the nascent surfaces generated by the cutting process. Dispersions of oil in water made using suitable emulsifier(s) are used ... -
1-D And 3-D Analysis Of Multi-Port Muffler Configurations With Emphasis On Elliptical Cylindrical Chamber
(2013-08-28)The flow-reversal elliptical cylindrical end chamber mufflers of short length are used often in the modern day automotive exhaust systems. The conventional 1-D axial plane wave theory is not able to predict their acoustical ... -
Workspace Analysis Of The Stewart Platform Manipulator
(2013-08-01) -
Analysis Of Non-Hertzian Contact Between Rough Surfaces
(2013-07-25)