Search
Now showing items 81-90 of 365
Resculpting In Voxel Modeling
(2011-11-11)
A Novel Hybrid Vehicle Architecture : Modeling, Simulation and Experiments
(2018-05-22)
Electric and hybrid vehicles are particularly suited for use in urban areas since city transportation is mainly characterized by relatively short driving distances, low continuous power requirements, long idling times and ...
Development Of A Single Cylinder SI Engine For 100% Biogas Operation
(Indian Institute of Science, 2007-05-21)
This work concerns a systematic study of IC engine operation with 100% biogas as fuel (as opposed to the dual-fuel mode) with particular emphasis on operational issues and the quest for high efficiency strategies. As a ...
Feasible and Intrinsic Kinetoelastostatic Maps for Compliant Mechanisms
(2018-03-06)
Despite many advances in the design methods for compliant mechanisms, it is still not possible to know if a set of user-specifications has a solution. Furthermore, practical considerations such as failure limits and ...
Experimental and Numerical Studies on Spray in Crossflow
(2018-02-06)
The phenomenon of spray in crossflow is of relevance in gas turbine combustor development. The current work focuses on spray in crossflow rather than liquid jet in crossflow from the standpoint of enhancing fuel dispersion ...
Towards Measurement And Simulation Of Elasto-Plastic Deformation
(2009-03-09)
The stretch forming process is frequently used in the automotive industry (outer pan-
els, inner panels, stiffeners etc.), the packaging industry and household appliances
sector, to manufacture complicated shapes and ...
Study of Droplet Dynamics in Heated Environment
(2018-04-02)
Droplets as precursor are extensively applied in diverse fields of science and engineering. Various contributions are provided previously towards analysis of single phase and multi-phase droplets of single and multiple ...
Robust Registration of Measured Point Set for Computer-Aided Inspection
(2018-03-22)
This thesis addresses the problem of registering one point set with respect to
another. This problem arises in the context of the use of CMM/Scanners to inspect
objects especially with freeform surfaces. The tolerance ...
Non-Dimensional Kinetoelastic Maps for Nonlinear Behavior of Compliant Suspensions
(2018-02-18)
Compliant suspensions are often used in micromechanical devices and precision mechanisms as substitutes for kinematic joints. While their small-displacement behavior is easily captured in simple formulae, large-displacement ...
Semisolid Die Casting of Wrought A6061 Aluminium Alloy
(2018-04-02)
The mechanical properties achieved with high performance wrought aluminium alloys are
superior to cast aluminum alloys. To obtain an intricate shaped component, wrought alloys are commonly subjected to forging followed by ...