Division of Mechanical Sciences: Recent submissions
Now showing items 401-420 of 1912
-
Biofilm Reactors for Greywater Treatment
Greywater (GW) is the fraction of wastewater discharged in houses that has not been contaminated with faeces. The average volumes of greywater generated in the households of Bengaluru varies between 40-70 litres/cap/day ... -
An advection velocity correction scheme for interface tracking using the level-set method
An advection velocity correction (AVC) scheme for interface tracking using the level-set method is presented in this thesis. The key idea is to apply a correction to the interface advection velocity at points adjacent ... -
Preliminary Investigation into the Cold Plasma Powered Water Gas Shift Reaction – Experiments And Analysis
Water gas shift reaction (CO + H2O ↔ H2 + CO2) is a CO oxidation reaction in the presence of steam resulting in the formation of H2 and CO2. Traditionally, water gas shift (WGS) reaction is achieved using multiple catalytic ... -
Structure-Property Correlation in Binary Immiscible Polymer Blends Compatibilized by Mutually Miscible Homopolymer and Carbonaceous Nanoparticles
The thesis systematically studies the various morphology, mechanical properties, crystallization kinetics and compatibilization effects of homopolymers, carbonaceous nanoparticles such as multiwall carbon nanotubes (MWNTs), ... -
Effect of processing on texture and microstructure in Aluminium-Lithium alloys and its consequences on mechanical properties
Lightweight Aluminium -Lithium based alloys have high potential for use in aerospace structural components. However, large anisotropy in mechanical properties restricts the use of these alloys. The alloy AA2195 (Al-Li-Cu-Mg-Ag-Zr) ... -
Influence of Western Ghats Orography on Temporal and Spatial Distribution of Rainfall over South Asia
The Western Ghats (WG) orography that runs along the western coast of peninsular India, is a long and narrow mountain chain with an average height of about 1200 meters. The orientation of this orography is approximately ... -
Characterization of Corneal Lens of Drosophila melanogaster and its Genetic Mutants using Atomic Force Microscope and Scanning Electron Microscope
Drosophila melanogaster (the fruit fly) is a widely used model organism for the study of human disease condition and genetic pathways due to the high degree of gene conservation between fly and human. The compound eyes of ... -
Development of wrought Mg-Li based alloys with improved strength and ductility
A comprehensive investigation has been undertaken to develop cold rolled Mg-Li based alloys with tensile properties superior to the existing commercial or experimental Mg-Li based alloys. In this endeavor, melting and ... -
Quality-quantity trade off during antibody production and the design of optimal passive immunization protocols
Passive immunization has been used classically to rapidly clear antigen and reduce disease burden. Surprisingly, recent studies have found passive immunization to induce lasting improvements in the humoral response, ... -
Synthesis and testing of eco-friendly, non-toxic cutting fluid emulsions
The evolutions in the development of metal working fluid (MWF) from petroleum based products have brought remarkable changes to the present growing machining industry. The established MWF/Cutting fluids have reduced the ... -
Mid-Air Collision Avoidance of Unmanned Aerial Vehicles
Autonomy is an essential feature of any robotic system. Aerial robots, commonly known as Unmanned Aerial Vehicles (UAVs), are being integrated into airspace and various trials towards achieving higher levels of autonomy ... -
Acquiring diagnostic knowledge from documents to predict issues in aircraft assembly
Expert knowledge is important in a product's lifecycle, especially during the manufacturing part of the lifecycle. Most of such knowledge is obtained through experience and its reuse can help prevent potential issues in ... -
Non-linear Vibration of Beam Immersed in Fluid
In space launch vehicles with liquid propulsion system, various sub-systems like gas bottles, anti-slosh baffles and fluid lines are placed inside the propellant tanks which become partially filled over time during flight. ... -
On Flow Physics of Spinning Samaras
A particular form of winged seed (samara) dispersal technique adopted by nature uses autorotative (unpowered rotation of the wing generating thrust force against gravity) descent; for eg. in Maple and Mahagony trees. ... -
A Study on the Influence of Reduced Electric Field on Plasma Assisted Combustion Kinetics
Plasma assisted combustion (PAC) technology has attracted much attention in the recent years as an innovative technique to improve the combustion efficiency. Plasma can enhance the combustion process mainly through two ... -
Valorization of Residual Ligno-celluloses from Anaerobic Digesters Through Product Recovery
Complete digestion of lignocellulosic biomass during anaerobic digestion (AD) is impossible due to recalcitrance created by lignin, consequently leaving behind a significant part of the feedstock unconverted to methane. ... -
State and Parameter Estimation in Water Distribution Systems
Water Distribution Systems (WDS) are one of the most important infrastructures in a society, which has a direct impact on human lives. Water authorities around the world are expected to supply the required amount of water ... -
Studies on Non-Destructive Evaluation of Friction Stir Weld Discontinuities with Probability of Detection
Friction stir welding(FSW) is a solid-state metal joining process which is currently being considered for joining of aerospace components. The zones associated with FSW are distinctly different from the fusion weld and ... -
Improved laboratory and computational models for thermal core–mantle interaction
The Earth's magnetic field is generated by thermochemical convection within its fluid outer core. The near-stationary high-latitude magnetic flux concentrations in the present day field indicate that convective ...