Search
Now showing items 131-140 of 174
Studies On Shear Bond Strength - Masonry Compressive Strength Relationship And Finite Element Model For Prediction Of Masonry Compressive Strength
(2009-04-16)
Masonry is a layered composite consisting of mortar and the masonry unit. Perfect bond between the masonry unit and the mortar is essential for the masonry to perform as one single entity in order to resist the stresses ...
Localization Induced Base Isolation In Fractionally And Hysteretically Damped Nonlinear Systems
(2009-08-04)
This Thesis comprises of two parts containing similar studies of Nonlinear Localization induced Base Isolation of structural systems. The present method of base isolation,like other nonlinear vibration isolation methods, ...
Kinetics Of Polymerization And Degradation By Non-Conventional Techniques
(Indian Institute of Science, 2007-03-28)
Non-conventional techniques for polymerization and depolymerization were investigated. The rates of polymerization were enhanced higher in ultrasonic, supercritical fluids and microwaves. However in these system under ...
Stochastic Analysis Of Flow And Solute Transport In Heterogeneous Porous Media Using Perturbation Approach
(2009-04-16)
Analysis of flow and solute transport problem in porous media are affected by uncertainty inbuilt both in boundary conditions and spatial variability in system parameters. The experimental investigation reveals that the ...
Recognition And Suppression Of Blends In A Tessellated Solid Model
(2007-12-29)
Blend recognition and suppression from a tessellated model is important in applications such as model simplification in analysis and collaborative design where tessellated models are being used. This could also be used to ...
Vibration Analysis Of Structures Built Up Of Randomly Inhomogeneous Curved And Straight Beams Using Stochastic Dynamic Stiffness Matrix Method
(Indian Institute of Science, 2006-07-19)
Uncertainties in load and system properties play a significant role in reliability analysis of vibrating structural systems. The subject of random vibrations has evolved over the last few decades to deal with uncertainties ...
Design And Analysis Of MEMS Angular Rate Sensors
(Indian Institute of Science, 2007-06-18)
Design and analysis of polysilicon and single crystal silicon gyroscopes have been carried out. Variations in suspension design have been explored. Designs that utilize in-plane and out-of-plane sensing are studied.
Damping ...
Low-Order Laminated Lock-Free Beam And Plate Elements Based On Coupled Displacement Field
(2007-10-23)
This study aims to investigate the behaviour of low-order beam and plate elements especially for their application to laminated structures. The merits and dements of the existing elements are brought out and new low-order ...
Fundamental Studies On Tribological Response Of Titanium And Copper
(2007-08-22)
Friction and wear have been observed m mechanical systems when there is a relative motion between two solid bodies Friction mainly results in loss of energy and wear results in matenal loss The proper understanding of ...
Cold Model Study Of Formation And Breaking Of Raceway
(Indian Institute of Science, 2005-12-22)
The raceway in the ironmaking blast furnace is a void in front of the hot blast tuyeres where coke and supplementary fuel burn to supply heat to the ironmaking process. The air velocity through the tuyeres is high (around ...