Search
Now showing items 651-660 of 993
Effect Of Atomic Mobility In The Precipitate Phase On Coarsening : A Phase Field Study
(2010-10-28)
In this thesis, we have used a phase field model for studying the effect of atomic mobility inside the precipitate phase on coarsening behaviour in two dimensional (2D) systems. In all the available coarsening theories, ...
Experimental And Numerical Studies On Flame Stability And Optimization Of A Compact Trapped Vortex Combustor
(2013-03-27)
A new Trapped Vortex Combustor (TVC) concept has been studied for applications such as those in Unmanned Aerial Vehicles (UAVs) as it offers potential for superior flame stability and low pressure loss. Flame stability is ...
Two Inverse Problems In Linear Elasticity With Applications To Force-Sensing And Mechanical Characterization
(2013-06-24)
Two inverse problems in elasticity are addressed with motivation from cellular biomechanics. The first application is computation of holding forces on a cell during its manipulation and the second application is estimation ...
A Continuous Optimization Approach To Protein Design With Structural And Functional Constraints
(2013-04-30)
We have developed a novel computational approach to functional de novo protein design using gradient based continuous optimization techniques. Motivated by many engineering applications in which a cost function is optimized ...
Tribology Of An Etched Near-Eutectic Aluminium-Silicon Alloy Sliding Against A Steel Counterface
(2013-05-01)
Lightweight aluminium-silicon alloy is an attractive material for making engine cylinders in automobiles. It imparts good power to weight ratio to the engine. High silicon containing aluminium alloys are used in current ...
Force-Amplifying Compliant Mechanisms For Micromachined Resonant Accelerometers
(2013-04-04)
This thesis work provides an insight into the design of Force-amplifying Compliant Mechanisms (FaCMs) that are integrated with micromachined resonant accelerometers to increase their sensitivity. An FaCM, by mechanically ...
Characterization Of Al-Si Alloy Engine Bores For Tribological Studies
(2013-06-06)
Aluminum - Silicon alloys are recognized as appropriate materials for high performance cast components used in transportation powertrain applications. A combination of excellent wear resistance, good thermal conductivity ...
Numerical Simulations Of Two-Phase Reacting Flow In A Cavity Combustor
(2013-05-28)
In the present work, two phase reacting flow in a single cavity Trapped Vortex Combustor (TVC) is studied at atmospheric conditions. KIVA-3V, numerical program for simulating three dimensional compressible reacting flows ...
Study Of The Effect Of Elasticity Of The Added Mass In Mass Sensing Using Resonant Peak Shift Technique
(2013-05-21)
Micromachined biosensors are used in chemical and biological applications. A biosensor which uses mass based transduction is called a mass sensor. Mass sensors are used to detect extremely small mass of biomolecules such ...
Modeling Of Transport Phenomena In Arteries
(2013-05-23)
Atherosclerosis is an arterial disease that occurs due to the build-up of lipids, cholesterol and other substances in the arterial wall, collectively called plaque, leading to narrowing of the vessel lumen and, in time, ...

