Search
Now showing items 101-110 of 993
Methodologies for Assessment of Impact Dynamic Responses
(2017-11-24)
Evaluation of the performance of a product and its components under impact loading is one of the key considerations in design. In order to assess resistance to damage or ability to absorb energy through plastic deformation ...
The Retrieval of Aerosols above Clouds and their Radiative Impact in Tropical Oceans
(2018-03-01)
Aerosols affect the global radiation budget which plays an important role in determining the state of the Earth's climate. The heterogeneous distribution of aerosols and the variety in their properties results in high ...
Studies On The Viability Of The Boundary Element Method For The Real-Time Simulation Of Biological Organs
(2016-09-02)
Realistic and real-time computational simulation of biological organs (e.g., human kidneys, human liver) is a necessity when one tries to build a quality surgical simulator that can simulate surgical procedures involving ...
A Geometric Approach for Discrete and Statistical Reach Analysis for a DHM with Mutable Supports
(2017-12-05)
Conventional ergonomics analysis involves building physical mockups and conducting simulated operations, such that the constraints experienced by the human subjects can be directly observed. The limitations of this approach ...
Studies on Glass Fiber-Reinforced Composites for CAE-Driven Design of Impact Safety Countermeasures
(2018-01-29)
Man-made materials such as fiber-reinforced composites (FRCs) can be tailored for optimum performance in product design applications in terms of strength and weight. The current work is aimed at studying the behaviors of ...
Study of Synergy between Plastic Deformation Mechanisms, Tribo-oxidation And Mechanically Mixed Layers in Tribology Of Ti-6Al-4V Slid Against SS316L And Alumina
(2017-10-11)
Alloys of titanium are highly preferred materials for their excellent strength to weight ratio but the tribological issues while using them has been posing challenging issues for the tribological analyst, which are still ...
An Integrated Framework for Supporting Decision Making During Early Design Stages on End-of-Life Product Disassembly
(2017-10-31)
Product life cycle (PLC) is the cycle which every product goes through from introduction to eventual demise. There are several issues with the current life cycle of a product when looked from the environmental impact ...
Prediction of Physical Behavior of Rotating Blades under Tip-Rub Impact using Numerical Modeling
(2018-02-09)
Rotating blades, which are the most critical components of any turbo-machinery, need to be designed to withstand forced vibrations due to accidental tip rub impact against inner surface of casing. These vibrations are ...
The Effect of Mismatch of Total Knee Replacement Components with Knee Joint : A Finite Element Analysis
(2018-01-10)
It has been noticed that the need for total knee replacement surgery is increasing for Asian region. A total knee replacement is a permanent surgical solution for a patient having debilitating pain in knee joint suffering ...
Studies In Stability Of Newtonian And Viscoelastic Fluid Flow Past Rigid And Flexible Surfaces
(2010-09-23)
The surface oscillations in a deformable wall are known to induce an instability in the adjacent flow even in the absence of inertia. This instability, if understood properly, can be exploited to generate a well-mixed flow ...