Browsing Division of Mechanical Sciences by Title
Now showing items 775-794 of 2275
-
Finite difference modelling of ground water flows
The thesis presents several studies on finite difference modelling of groundwater flow systems. The studies include: (i) Development of an efficient computational algorithm for nonrectangular flow domains; (ii) Comparative ... -
Finite element analysis of stress concentrations and singularities
Stress concentrations or singularities occur in a structure whenever there is a sharp change in geometry, or discontinuities in loading or material properties. In the analysis of problems with significant concentrations, ... -
Finite Element And Experimental Studies On Fracture Behavior Of Bulk Metallic Glasses
(2011-01-19)The objective of this thesis is to study the fracture behavior of bulk metallic glasses. For this purpose, detailed finite element investigation of the mode I and mixed mode (I and II) stationary crack tip fields under ... -
A Finite Element Investigation Of Brittle Fracture During Spherical Nanoindentation Of Thin Hard Films
(Indian Institute of Science, 2006-12-14)Hard ceramic films of micrometric thickness deposited on a soft metallic substrate have ushered in a new era in the fabrication of structural, tribological, microelectronic and optical components. The mechanical performance ... -
Finite Element Limit Analysis for Solving Different Axisymmetric Stability Problems in Geomechanics : Formulations and Solutions
(2017-11-15)Limit analysis is a very powerful tool to find accurate solutions of several geotechnical stability problems. This analysis is based on the theory of the plasticity and it provides two limiting solutions within lower and ... -
Finite Element Modeling of Knee Joint to Study Tibio-Femoral Contact Machanics
(2018-05-10)Articular cartilage covers the articulating ends of diarthrodial joints. It plays a vital role in the function of the musculoskeletal system by allowing almost frictionless motion to occur between the articular surfaces ... -
First Principles Study Of Structure And Stacking Fault Energies In Some Metallic Systems
(2010-08-05)Plastic deformation in crystalline materials largely depends on the properties of dislocations, in particular their mobility. While continuum description of deformation of a crystalline metal can be made reasonably well ... -
First-Principles Studies of Point Defects and Phase Transformations in Materials
(2018-01-18)The functional and mechanical properties of a material are often determined by the defects in them. A thorough understanding of the relationship between the defects and the properties allows for tailoring a material’s ... -
Flame Particle Tracking Analysis of Turbulence-Premixed Flame Interaction
This work describes the computational and theoretical developments made in the understanding of turbulence-premixed flame interaction, using both lean and rich H2-air mixtures, in a flow field of near-isotropic turbulence. ... -
Flexible Nanostructured Hydrogen Sensors
Hydrogen is rapidly emerging as a key energy carrier and industrial feedstock in the global transition to cleaner energy systems. However, due to its high diffusivity and flammability, even minor leaks can result in ... -
FLIPP-NAAT: A paper-based LAMP assay for point-of-care TB detection
Molecular diagnostic techniques like polymerase chain reaction (PCR) revolutionized the world of healthcare. Instead of waiting for infectious agents to physically grow as in conventional culture-based tests, genetic ... -
Flood Risk Assessment in Peninsular India: Integrating Data, Multivariate Statistics, and Machine Learning
Floods are among the most significant natural hazards in India; however, their drivers, spatial coherence, and potential impacts remain poorly understood, particularly in data-scarce catchments. This thesis addresses these ... -
Flow Acoustic Analysis Of Complex Muffler Configurations
(2013-06-21)A theoretical study has been carried out on different methods available to analyze complex mufflers. Segmentation methods have been discussed in detail. The latest two port segmentation method has been discussed and employed ... -
Flow and Forces on Rigid and Flexible Plates in Unsteady Rotational Motion
The swimming motion of fishes have long fascinated scientists and engineers. Over the past few decades, researchers have studied physical models mimicking the tail beat of fishes in an effort to extract key physical ... -
Flow and structure of dense granular materials
Granular materials are frequently encountered in our daily lives and are widely processed forms of matter in various industries. Despite decades of research, the mechanical behavior of granular materials is not well ... -
Flow and Windage Heating in Labyrinth Seals
(2017-11-24)The ability to quantify leakage flow and windage heating for labyrinth seals with honeycomb lands is critical in understanding gas turbine engine system performance and predicting its component lifes. Variety of labyrinth ... -
Flow characteristics of rectangular and trapezoidal finite crest... ..weirs
This thesis presents an extensive and systematic study of the free and submerged flow characteristics of rectangular and trapezoidal finite crest width weirs and triangular profile weirs. Aspects studied include the ... -
Flow characteristics of sharp-edged orifices,quadrant-edged orifices and nozzles
This thesis presents an integrated study of flow past sharp-edged orifices, quadrant-edged orifices and long radius nozzles, covering different aspects such as metering characteristics, loss characteristics and flow ... -
Flow Over A Circular Cylinder With A Flexible Splitter Plate
(2010-07-08)Previous work on rigid splitter plates in the wake of a bluff body has shown that the primary vortex shedding can be suppressed for sufficiently long splitter plates. In the present work, we study the problem of a flexible ...