Browsing Division of Mechanical Sciences by Title
Now showing items 270-289 of 1799
-
Defluoridation Of Drinking Water Using A Combined Alum-Activated Alumina Process And Nanoscale Adsorbents
(2010-10-08)Excess Fluoride in drinking water is a cause for concern in several countries in the world. Various techniques have been developed to mitigate the harmful effects of fluoride. In the present work, a combined alum and ... -
Defluoridation Of Drinking Water Using Activated Alumina
(2013-05-20)Excess fluoride (F-) in drinking water poses a health threat to millions of people around the world. In the present work, activated alumina (AA) has been used as an adsorbent. Data obtained from batch experiments were ... -
Deformation characteristics of soil under sequential dynamic torsional and cyclic axial loading
Earthquake-induced structural damages caused due to site effects, soil liquefaction failure, and associated excessive settlement are well-known worldwide. The primary controlling factor responsible for the superstructure’s ... -
Degradation Of Water Soluble Polymers
(2011-08-25) -
Delamination Modeling and Detection in Composite Structures
(2017-12-12)Composite laminated structures are prone to delamination. Rotorcraft flexbeams, apart from many other aerospace primary load carrying members are made up of composite laminated structures. A delaminated primary load carrying ... -
Demonstration Of Supersonic Combustion In A Combustion Driven Shock-Tunnel
(2011-01-17)For flights beyond Mach 6 ramjets are inefficient engines due to huge total pressure loss in the normal shock systems, combustion conditions that lose a large fraction of the available chemical energy due to dissociation ... -
Densification Mechanisms for Spark Plasma Sintering in Alumina and Alumina Based Systems
(2018-03-19)The densification mechanisms of polycrystalline α-alumina by spark plasma sintering are highly contradictory, with different research groups suggesting diffusion to dislocation controlled mechanisms to be rate controlling. ... -
Densification, Oxidation, Mechanical And Thermal Behaviour Of Zirconium Diboride (ZrB2) And Zirconium Diboride - Silicon Carbide (ZrB2-Sic) Composites
(2016-11-23)Sharp leading edges and nose caps on hypersonic vehicles, re-entry vehicles and reusable launch vehicles are items of current research interest for enhanced aerodynamic performance and maneuverability. The unique combination ... -
Design & Fabrication of Bio-responsive Drug Carriers Based on Protamine & Chondroitin Sulphate Biopolymers
(2017-10-26)The present thesis focuses on the fabrication of bio-stimuli responsive micro- and nano-carriers for drug delivery applications. In particular, the objective of this work is to investigate the possibility of using polypeptide ... -
Design And Analysis Of Flexible Beam Platform As Vibration Isolator For Space Applications
(2016-10-20)Spacecrafts are generally equipped with high precision optical and other sensor payloads. The structures of most of the spacecrafts are light-weight, flexible and have low damping. Vibrations are often induced in the ... -
Design And Analysis Of MEMS Angular Rate Sensors
(Indian Institute of Science, 2007-06-18)Design and analysis of polysilicon and single crystal silicon gyroscopes have been carried out. Variations in suspension design have been explored. Designs that utilize in-plane and out-of-plane sensing are studied. Damping ... -
Design and Analysis of Multifunctional Composites for Unmanned Aerial Vehicles
The principal aim of this thesis is to analyse the effectiveness of multifunctional composites as intelligent structures to improve mechanical properties and activate additional non-structural features. In order to investigate ... -
Design and Characterisation of Rotating Gliding Arc Reactor for Dilute Hydrocarbon Conversion Applications: Experiments and Simulations Studies
In recent years, non-thermal plasma technology is becoming popular for chemical applications involving conversion/abatement/decomposition of compounds of interest. The specialty of non-thermal plasmas is to activate chemical ... -
Design and Development of 75 mm Fixed-Wing Nano Air Vehicle
(2018-06-11)This thesis deals with the design and development of a 75 mm fixed-wing nano-air vehicle (NAV). The NAV is designed to fit inside a cube with each side measuring 75 mm. The range and endurance of the NAV are 300 m and 2-3 ... -
Design and Development of a Novel Solar Thermal Receiver
One of the most widely used solar collectors for process heating and large scale electricity generation is the parabolic trough collector (PTC), in which a tube placed at the focus of the parabola receives concentrated ... -
Design and Development of a Three-degree-of-freedom Parallel Manipulator to Track the Sun for Concentrated Solar Power Towers
(2018-05-21)In concentrated solar power (CSP) stations, large arrays of mirrors which are capable of changing its orientation are used to reflect the incident solar energy to a stationary receiver kept at a distance. Such mirrors are ... -
Design And Development Of An Improved Anti-Lock Braking System For Two-Wheelers
(2011-07-12)In today’s fast moving world, automobiles are facing challenges in terms of having to survive road accidents, increasing traffic, bad road-conditions and high/express ways. Brake systems play a vital role in controlling ... -
Design and Development of Capacitive Micromachined Ultrasonic Transducers
(2018-02-22)This thesis presents the design and analysis for development of a Capacitive Micromachined Ultrasonic Transducer (CMUT), a novel sensor and actuator, aimed at replacing the conventional piezoelectric transducers for ... -
Design And Development Of Diaphragmless Hypersonic Shock Tunnel
(2011-03-16)The growing requirements to achieve hypersonic flights, as in the case of reentry vehicles, pose a serious challenge to the designers. This demands an understanding of the features of hypersonic flow and its effect on ... -
Design and Development of Force Sensor for measurement of Tactile Friction
The sense of touch, along with the other senses, decides the perception of world around us. We touch, grip, and wear various products in our day-to-day life, be it the constant interaction we have with our mobile phones, ...