Browsing Division of Mechanical Sciences by Title
Now showing items 221-240 of 1799
-
Computerized Landmarking And Anthropometry Over Laser Scanned 3D Head And Face Surface Meshes
(2008-01-11)Understanding of the shape and size of different features of human body from the scanned data is necessary for automated design and evaluation of product ergonomics. The traditional method of finding required body dimensions ... -
Concentration Gradient Driven Natural Convection in Soluble Lead Redox Flow Batteries
Low cost and long cycle-life energy storage systems are needed to harness renewable sources of energy at large scale. Among the options available, redox ow batteries (RFB) offer the maximum potential. The vanadium based ... -
Concrete Fracture And Size Effect - Experimental And Numerical Studies
(2010-10-14)Most materials including concrete have pre-existing flaws or defects. The fracture energy of concrete is a basic material property needed to understand fracture initiation and propagation in concrete. Whether fracture ... -
Condensation Heat Transfer Of R-134A On Micro-Finned Tubes : An Experimental Study
(2010-06-04)Eco-friendly non-CFC refrigerants were introduced in the Air Conditioning and Refrigeration industry during the last few years to reduce damage to the stratospheric ozone layer. The HFC refrigerant R-134a, which has zero ... -
Confinement, Coarsening And Nonequilibrium Fluctuations In Glassy And Yielding Systems
(2016-02-17)One of the most important and interesting unsolved problems of science is the nature of glassy dynamics and the glass transition. It is quite an old problem, and starting from the early20th century there have been many ... -
Conflation Of CFD And Building Thermal Simulation To Estimate Indian Thermal Comfort Level
(2013-06-21)In the residential and commercial buildings, most of the energy is used to provide the thermal comfort environment to the occupants. The recent research towards Green Buildings is focusing on reduction of energy consumption ... -
Conjugate Natural Convection In Horizontal Annuli
(2011-06-23) -
Conjunctive And Multipurpose Operation Of Reservoirs Using Genetic Algorithms
(Indian Institute of Science, 2006-07-17)Optimal operation of reservoir systems is necessary for better utilizing the limited water resources and to justify the high capital investments associated with reservoir projects. However, finding optimal policies for ... -
Constitutive Theories for Polymers Using Non-Classical Continuum Mechanics
This thesis is on the development of a few constitutive theories characterising the thermo-mechanical response of polymers. In proposing the theories, some aspects of non-classical continuum mechanics are used. The first ... -
Constrained Adaptive Control of Nonlinear Systems with Application to Hypersonic Vehicles
Constraints in input, output, and states are evident in most of the practical systems. Explicitly incorporating these constraints into the control design process leads to its superior performance in general. Therefore, ... -
Constrained Optimal Guidance Design of Interceptors for High-Speed Ballistic Targets
In this thesis, optimal control theory has been applied to design constrained terminal guidance algorithms for interceptor to destroy incoming high speed ballistic targets. There exist several optimal guidance algorithms ... -
Constraining the Lithium Seawater Mass and Isotope Budget: Diagenetic Processes Through Marine Pore Waters
Silicate weathering consumes CO2 and controls cation fluxes to the ocean, thus playing a critical role in modulating long-term seawater chemistry and climate. There are very few markers of seawater chemistry whose value ... -
Constraint Effects On Stationary Crack Tip Fields In Ductile Single Crystals
(2011-03-15)In order to understand and predict the fracture behaviour of polycrystalline materials from a fundamental perspective, it is important to first investigate plastic deformation at a crack tip in a ductile single crystal. ... -
Construction of 3D CAD Models From 2D Orthographic Views
(2011-01-19)This thesis addresses the problem of constructing 3D CAD models from 2D engineering drawings of the object. Procedures for each step in the popular bottom-up approach are described. In each of the steps in this approach, ... -
Contact Mechanics Of Layered Structures
(2009-06-30)Contact mechanical study of layered structures is useful to various fields of engineering, such as - mechanical engineering, civil engineering, materials engineering and biomechanics. Thin hard film coating on a compliant ... -
Contaminant Transport through Soil and Effect of Bentonite and super-absorbent Polymer on Transport Parameters
(2018-08-20)The aim of this present research is to improve the containment properties of clayey soil by the use of bentonite and polymers as the additives. Clayey soils are generally used for the control of soil and water pollutions ... -
A Continuous Optimization Approach To Protein Design With Structural And Functional Constraints
(2013-04-30)We have developed a novel computational approach to functional de novo protein design using gradient based continuous optimization techniques. Motivated by many engineering applications in which a cost function is optimized ...