Browsing Division of Mechanical Sciences by Title
Now showing items 1233-1252 of 1799
-
Prediction of multi-physical properties of fibre-reinforced composites using deep learning
This work develops a convolutional neural network (CNN) based surrogate model for simultaneous multi-physical property prediction from the binary images of fibre-reinforced composites representative volume elements (RVEs). ... -
Prediction of Physical Behavior of Rotating Blades under Tip-Rub Impact using Numerical Modeling
(2018-02-09)Rotating blades, which are the most critical components of any turbo-machinery, need to be designed to withstand forced vibrations due to accidental tip rub impact against inner surface of casing. These vibrations are ... -
Prediction Of Separation Factor In Foam Separation Of Proteins
(Indian Institute of Science, 2005-07-20)Polyhedral foams offer large gas-liquid interfacial area associated with a small amount of liquid. Therefore, if a solute adsorbs preferentially at the interface, the concentration of the solute in the foam will be greater ... -
Prediction Of The Behaviors Of Hollow/Foam-Filled Axially Loaded Steel/Composite Hat Sections For Advanced Vehicle Crash Safety Design
(2017-05-29)Hat sections, single and double, made of steel are frequently encountered in automotive body structural components such as front rails, B-Pillar, and rockers of unitized-body cars. These thin-walled components can play a ... -
Prediction Of The Mechanical Behaviour Of A Closed Cell Aluminium Foam Using Advanced Nonlinear Finite Element Modelling
(2016-05-06)Cellular materials like aluminum foam which is the subject of interest here are generally characterized by high energy absorption capacity per unit weight. Materials of this category can be ideal for applications such as ... -
Preliminary Investigation into the Cold Plasma Powered Water Gas Shift Reaction – Experiments And Analysis
Water gas shift reaction (CO + H2O ↔ H2 + CO2) is a CO oxidation reaction in the presence of steam resulting in the formation of H2 and CO2. Traditionally, water gas shift (WGS) reaction is achieved using multiple catalytic ... -
Premixed Turbulent Combustion Of Producer Gas In Closed Vessel And Engine Cylinder
(2010-10-22)Producer gas derived from biomass is one of the most environment friendly substitutes to the fossil fuels. Usage of producer gas for power generation has effect of zero net addition of CO2 in atmosphere. The engines working ... -
A Prestress Based Approach To Rotor whirl
(2010-06-02)Rotordynamics is an important area in mechanical engineering. Many machines contain rotating parts. It is well known that rotating components can develop large amplitude lateral vibrations near certain speeds called critical ... -
Printed and Low Temperature Processed Oxide Electronics with Superior Electrical Performance and Mechanical Reliability
In line with the forthcoming industrial revolution, printed and flexible electronics is a rapidly developing research area that involves wearable and consumer electronics to be produced in large quantities and be connected ... -
Probabilisltic Analysis of Engineering Response of Fiber Reinforced Soils
(2018-04-03)The concept of reinforcement was developed in late 20th century and since then till the recent past there are many works carried out on the effect of fibers in imparting strength and stiffness to the soil. Experimental ... -
Probabilistic Analysis of Radionuclide Transport for Radioactive Waste Disposal Systems in Soil and Fractured Rocks
The safe management of radioactive waste disposal facilities is increasingly becoming a necessary condition for the future development of nuclear industry. To ensure long-term safety of these disposal facilities, performance ... -
Probabilistic design and optimization of foundations on cohesionless soil using surrogate models
The design of foundations depends on the properties of soil, which are affected by various forms of uncertainties. These uncertainties affect the foundation performance and hence are considered in the deterministic design ... -
Processing And Characterisation Of Bulk Al2 O3 p /AIN-Al Composites By Pressureless Infiltration
(Indian Institute of Science, 2005-12-22)Al-Mg alloys were infiltrated into porous alumina preforms at temperatures greater than 950°C where significant amount of nitride forms in the matrix. The present work aims to obtain a process window for growing A1N rich ... -
Processing And Characterization Of B4C Particle Reinforced Al-5%Mg Alloy Matrix Composites
(Indian Institute of Science, 2005-12-22)Metal matrix composites (MMCs) are emerging as advanced engineering materials for application in aerospace, defence, automotive and consumer industries (sports goods etc.). In MMCs, a metallic base material is reinforced ... -
Processing And High Temperature Deformation Of Pure And Magnesia Doped Alumina
(Indian Institute of Science, 2005-12-22)Creep resistance is an important design criterion at high temperatures especially when continuous attempts are made to increase the efficiencies by increasing the operating temperatures. Alumina is an important high ... -
Processing mediated polymorphism in PVDF-based dielectric polymers and their application
The ever-increasing demand in electronic devices, piezoelectric materials such as ceramics, polymers and polymer ceramic composites with enhanced piezoelectric and dielectric properties has become the focus of many ... -
Processing Of Zirconia Based Honeycombs And Evaluation Of Thermo Mechanical Properties
(2010-08-16)Ceramic cellular solids, mainly honeycombs and foams, are a novel class of composite materials where one phase is an interconnected network of solid struts or plates and the other one an empty phase or possibly a fluid. ...