Show simple item record

dc.contributor.advisorJayaraman, Narayanaswamy
dc.contributor.authorNaresh, Kottari
dc.date.accessioned2013-07-19T05:32:10Z
dc.date.accessioned2018-07-30T15:12:51Z
dc.date.available2013-07-19T05:32:10Z
dc.date.available2018-07-30T15:12:51Z
dc.date.issued2013-07-19
dc.date.submitted2011
dc.identifier.urihttps://etd.iisc.ac.in/handle/2005/2130
dc.identifier.abstracthttp://etd.iisc.ac.in/static/etd/abstracts/2734/G24762-Abs.pdfen_US
dc.description.abstractMycobacterial infection is a major health concern. High drug resistivity of the mycobacterium is due to its multi-layered, thick hydrophobic waxy cell wall components, consisting of cross-linked peptidoglycan (PG), mycolyl arabinogalactan (mAG) and lipoarabinomannan (LAM) polysaccharides. These polysaccharides are composed of arabinose and galactose in the furanose form and mannose in the pyranose form. The high waxy hydrophobic components of the mycobacterial cell wall acts as a barrier for most hydrophilic antibacterial agents. Enzymes responsible for the biosynthesis of polysaccharides of mAG and LAM are arabinosyl transferase (AraT), galactosyl transferase (GlfT) and mannosyl transferase (ManT). In the absence of furanoside derivatives of D-arabinose and D-galactose in mammalian systems, inhibitors based on these sugars arise an interest. Upon realizing structural characteristics of cell wall polysaccharides, the chemical syntheses of such polysaccharides were reported. Biological studies of synthetic arabinomannan and arabinogalactan oligosaccharides were performed, in order to identify their effects in enzymatic, as well as, mycobacterial growth assays. Chapter 1 of the thesis describes the structural features of mAG and LAM polysaccharides. Chemical synthesis of oligosaccharides related to mycobacterial cell wall components and their effects of mycobacterial growth and enzymatic assays are discussed. In my research program, synthesis and studies of oligosaccharides pertaining to mycobacterial cell wall components were undertaken. Monovalent and bivalent glycolipids 1 and 2 (Figure 1), containing arabinofuranoside trisaccharide as the sugar head group, were synthesized and their effects on the growth of M. smegmatis strain were studied. In the presence of arabinan glycolipids, retardation of the growth of M. smegmatis was observed and the inhibitory activity was found to be specific with glycolipids containing arabinofuranoside head groups. Glycolipid with maltosyl sugar and arabinofuranoside trisaccharide without lipid chains, did not affect the mycobacterial growth. Continuing the effort, tri- and tetrasaccharide of arabinomannan glycolipids were synthesized and their effects in the mycobacterial growth were studied. It was found that 3 was inhibiting the growth of the mycobacterium, whereas in the case of 4, inhibition was found to be less when compared to 3. Relative inhibitions of mycobacterial growth by synthetic glycolipids 1-4, at a concentration 200 µg/mL, were found to be in a varying degrees, ranging from 16 % in the case of 4 and 65 % in the case of 3. Figure 1. Molecular structures of arabinan and arabinomannan oligosaccharides 1-7. Following mycobacterial growth inhibition studies, surface plasmon resonance studies of synthetic oligosaccharides were performed, in order to identify their interactions with mycobacterial cell lysates. Amine tethered glycosides 5-7 (Figure 1) were synthesized and immobilized onto SPR sensor chip through amine coupling methodology. From SPR studies, it was found that the binding affinity was higher with cell lysates from motile strains than non-motile strain. Among various arabinomannans, glycoside 5, presenting two mannose units showed higher affinity than 6 and 7, having no or one mannose unit, respectively. Chapter 2 of the thesis provides details of synthesis, biological and biophysical studies of arabinan and arabinomannan glycolipids. Continuing the synthesis and studies with arabinose oligosaccharides, a linear tetra-, hexa and octasaccharide glycolipids, containing α-(1→5) linkages (10-12), as well as, a branched heptasaccharide containing α-(1→2) and α-(1→5) linkages (14) between the arabinofuranoside units (Figure 2) were synthesized. In addition to glycolipids, oligosaccharides without alkyl chains (8, 9 and 13) were also prepared. Synthesis was performed using trichloroacetimidate and Figure 2. Molecular structures of linear and branched arabinan derivatives 8-14. thioglycosides as glycosyl donors. Synthesis of linear oligosaccharide derivatives 8-12 was achieved by iterative glycosylation and deprotection strategies. Branched heptasaccharide derivatives 13 and 14 were synthesized by using block glycosylation method, wherein two fold excess of arabinose disaccharide was reacted with a suitably protected arabinose trisaccharide. Upon synthesis, molecular modeling studies were performed to identify the conformational behavior of arabinan glycolipids. Conformational studies were performed in three steps, namely, (i) dihedral scan (ii) conformational search and (iii) molecular dynamics. Dihedral scan was performed to assess favorable torsion angles at each glycosidic linkage with respect to overall conformation of the molecule. Monte-Carlo conformational search was performed to obtain the lowest energy structure of arabinan glycolipids. Relative orientations of lipidic portions and sugar portions were identified for linear and branched arabinan glycolipids. The least energy conformations of 10, 11, 12 and 14 are shown in Figure 3. In the case of linear molecules 10, 11 and 12, alkyl chains and arabinofuranoside portion did not phase segregate, whereas in the case of branched glycolipid 14, the alkyl chains were observed to move away from the sugar moieties. Molecular dynamic calculations were performed for the lowest energy structure, in order to evaluate the torsion angles in the trajectory. Following the synthesis and conformational analysis of the arabinan glycolipids, surface plasmon resonance studies were performed to assess their interactions with a host protein, namely, pulmonary surfactant protein-A (SP-A). For the interaction studies, SP-A was immobilized on to the CM-5 sensor chip using amine coupling method. Varying concentrations of arabinan glycolipids 10, 11, 12 and 14 and oligosaccharides 8, 9 and 13 were used as analytes. Responses from the surface of SP-A were subtracted from that of ethanolamine to eliminate the non-specific interactions. Primary sensorgrams were fitted using 1:1 Langmuir model to obtain the kinetic parameters of the interactions. Specificities and relative binding affinities of arabinan oligosaccharides interacting with SP-A are presented in Table 1. The affinities between Figure 3. Lowest energy structures of glycolipids 10, 11, 12 and 14 derived from molecular modeling studies. arabinan oligosaccharides and SP-A were found in the range of 4.9-47x103 M-1. Among the series, branched arabinan oligosaccharides 13 and 14 showed higher Ka values than the linear arabinan glycolipids. The association rate constants (kon) were generally higher for the oligosaccharides without lipidic chain, whereas, the dissociation rate constants (koff) were slower with oligosaccharides having lipidic chains. Faster kon was also associated with a faster koff for oligosaccharides without the lipidic chains. For the glycolipids, a relatively slower koff was found to be the trend. In the case of branched heptasaccharide derivatives, glycolipid 14 showed higher binding constant than heptasaccharide with a thiocresyl group at the reducing end 13. Chapter 3 of the thesis presents the synthesis, conformational analysis and SPR studies of linear and branched arabinan glycolipids. Table 1. Kinetic parameters of the interactions between arabinose derivatives 8-14 and SP-A. Compound kon (M-1s-1) kd (s-1) (104) Ka (M-1) (10-3) χ2 12 3.9 7.91 4.9 8.3 11 1.5 3.98 3.77 2.9 10 0.384 0.22 17.5 6.7 14 27.3 5.79 47.2 4.5 8 11.3 6.14 18.4 2.3 9 23.3 11.6 20.1 2.4 13 53.6 17.9 29.9 5.4 Upon assessing the biophysical studies of the α-arabinofuranoside glycolipids, an effort was undertaken to prepare glycolipids containing β-arabinofuranoside linkages and to study their conformational and biophysical properties. Arabinan glycolipids 15 and 16 (Figure 4), containing β-(1→2), β-(1→3) and β-(1→5) linkages between furanoside units were synthesized to compare the properties with the corresponding synthetic α-arabinan glycolipids. Incorporation of β-arabinofuranoside linkages in 15 and 16 was achieved using low temperature activation of silyl substituted glycosyl donor 17 (Figure 4), with NIS and AgOTf. The configurations in 15 and 16 were confirmed through 1H-1H COSY, 1H-13C HMQC NMR techniques. During the synthesis of 15 and 16, stereoselective incorporation of two β-Araf linkages on a single furanoside unit was achieved for the first time. Conformational studies of 15 and 16 were conducted similar to α-arabinan glycolipids, as above, to identify most favorable conformations of inter-ring, as well as, overall conformation of the molecule. The interactions between the SP-A and β-arabinofuranoside glycolipids 15 and 16 were also assessed with the aid of SPR technique. The analysis showed that the affinities of glycolipids 15 and 16 to SP-A were found to be relatively lower when compared to α-arabinofuranoside glycolipids. Synthesis and studies of β-arabinofuranoside glycolipids are described in chapter 4 of the thesis. Figure 4. Molecular structures of β-arabinofuranoside glycolipids 15 and 16. In summary, the present thesis describes synthesis, conformational and biophysical studies of synthetic arabinan and arabinomannan glycolipids. Monovalent and bivalent arabinan, tri- and tetrasaccharide arabinomannan glycolipids were synthesized and their effects in the mycobacterial growth were studied. It was found that arabinan and arabinomannan glycolipids inhibited the growth of the mycobacterium. The inhibitory activity is specific with the arabinan and arabinomannan glycolipids and the glycolipids with higher arabinose composition were found to be better inhibitors for mycobacterial growth. The interactions of mycobacterial cell lysates with arabinomannan compounds were evaluated through SPR technique. Linear tetra-, hexa-, octa- and branched heptasaccahride arabinan glycolipids containing α-Araf linkages between furanoside units were synthesized. Molecular modeling studies of arabinan glycolipids were performed, in order to identify their lowest energy conformations. Biophysical studies of linear and branched arabinan glycolipids were conducted to assess their interactions with pulmonary surfactant protein-A (SP-A) through surface plasmon resonance technique. Syntheses, conformational and biophysical studies were extended further to β-arabinofuranoside glycolipids. Overall, the thesis provides synthesis, conformational, biological and biophysical studies of a series of lipoarabinomannan oligosaccharides. The results provide a possibility to evolve newer types of glycolipids that can act as inhibitors of mycobacterial growth. (For structural formula pl see the hard copy)en_US
dc.language.isoen_USen_US
dc.relation.ispartofseriesG24762en_US
dc.subjectOligoarabinan Glycolipidsen_US
dc.subjectOligoarabinomannan Glycolipidsen_US
dc.subjectOligosaccharides - Synthesisen_US
dc.subjectMycobacterial Growth - Oligosaccharidesen_US
dc.subjectArabinofuranosideen_US
dc.subjectMycobacterium smegmatisen_US
dc.subjectLipoarabinomannansen_US
dc.subjectArabinofuranosyl Glycolipidsen_US
dc.subjectLipoarabinomannan Oligosaccharidesen_US
dc.subject.classificationOrganic Chemistryen_US
dc.titleSynthesis, Conformational Analysis And Biophysical Studies Of Oligoarabinan And Oligoarabinomannan Glcolipidsen_US
dc.typeThesisen_US
dc.degree.namePhDen_US
dc.degree.levelDoctoralen_US
dc.degree.disciplineFaculty of Scienceen_US


Files in this item

This item appears in the following Collection(s)

Show simple item record