Search
Now showing items 1-10 of 30
Analysis Of Multiply-Connected Acoustic Filters with Application To Design Of Combination Mufflers And Underwater Noise Control Linings
(2008-10-01)
This thesis endeavors towards developing various concepts employed in analysis and
design of acoustic filters for varied applications ranging from combination mufflers for automobiles to complex networks of gas carrying ...
Numerical Study Of Heat Transfer From Pin Fin Heat Sink Using Steady And Pulsated Impinging Jets
(2008-01-25)
The work reported in this thesis is an attempt to enhance heat transfer in electronic devices with the use of impinging air jets on pin-finned heat sinks. The cooling per-formance of electronic devices has attracted increased ...
Development Of An Activated Carbon+ HFC 134a Adsorption Refrigeration System
(2009-04-01)
The demands facing the refrigeration industry are minimal usage of conventional energy sources for compression and avoidance of ozone depleting substances. One of the approaches to combat these issues is the use of thermally ...
Contact Mechanics Of Layered Structures
(2009-06-30)
Contact mechanical study of layered structures is useful to various fields of
engineering, such as - mechanical engineering, civil engineering, materials engineering and biomechanics. Thin hard film coating on a compliant ...
Analytical, Numerical, And Experimental Studies Of Fluid Damping In MEMS Devices
(2009-09-11)
Fluid damping arising from squeeze film flow of air or some inert gas trapped between an oscillating micro mechanical structure, such as a beam or a plate, and a fixed substrate often dominates the other energy dissipation ...
Transport Phenomena In Laser Surface Alloying: A Numerical Investigation
(Indian Institute of Science, 2006-08-24)
A comprehensive, transient three-dimensional model of a single-pass laser surface alloying process has been developed and used to examine the heat, momentum and species transport phenomena. A numerical study is performed ...
Development Of A Single Cylinder SI Engine For 100% Biogas Operation
(Indian Institute of Science, 2007-05-21)
This work concerns a systematic study of IC engine operation with 100% biogas as fuel (as opposed to the dual-fuel mode) with particular emphasis on operational issues and the quest for high efficiency strategies. As a ...
Towards Measurement And Simulation Of Elasto-Plastic Deformation
(2009-03-09)
The stretch forming process is frequently used in the automotive industry (outer pan-
els, inner panels, stiffeners etc.), the packaging industry and household appliances
sector, to manufacture complicated shapes and ...
A Unified Constitutive Model For Large Elasto-plastic Deformation
(2009-07-23)
Rapid development and stiff competition in material related industries such as the automotive, demand very high precision in end products in very quick time. The transformation of raw material into an intricate-shaped final ...
Modular Kinematic Analysis Of Planar Linkages
(2009-04-24)
This thesis has developed an efficient methodology for automatic kinematic analysis of planar linkages using the concept of modular kinematics. Unlike conventional general purpose kinematic analysis packages where each joint ...