Browsing Mechanical Engineering (ME) by Subject "Mechanical Engineering"
Now showing items 1-20 of 108
-
1-D And 3-D Analysis Of Multi-Port Muffler Configurations With Emphasis On Elliptical Cylindrical Chamber
(2013-08-28)The flow-reversal elliptical cylindrical end chamber mufflers of short length are used often in the modern day automotive exhaust systems. The conventional 1-D axial plane wave theory is not able to predict their acoustical ... -
Air-Assited Atomization Strategies For High Viscosity Fuels
(2016-02-25)Atomization of fuel is an important pre-requisite for efficient combustion in devices such as gas turbines, liquid propellant rocket engines, internal combustion engines and incinerators. The overall objective of the present ... -
Analysis Of Squeeze Film Damping In Microdevices
(2012-12-12)There are various energy dissipation mechanisms that affect the dynamic response of microstructures used in MEMS devices. A cumulative effect of such losses is captured by an important characteristic of the structure called ... -
Analytical Investigations on Linear And Nonlinear Wave Propagation in Structural-acoustic Waveguides
(2017-09-26)This thesis has two parts: In the first part, we study the dispersion characteristics of structural-acoustic waveguides by obtaining closed-form solutions for the coupled wave numbers. Two representative systems are ... -
Axially Homogeneous Turbulent Convection at High Rayleigh Numbers : Scaling Laws for Flux and Spectra
(2018-05-30)Natural turbulent convection studies encompass a wide range of flows occurring in nature, for example, atmospheric and oceanic flows, con-vection in the Earth’s mantle, convection in the stars and also in many engineering ... -
Axisymmetric Contact Problems In Composite Elastic Media
(2012-03-01) -
Characterization of Flow Induced Noise Received by an Array Placed at Stagnation Point of an Underwater Axisymmetric Body
(2018-07-09)Given the interest on underwater axisymmetric cylindrical bodies for the development of high-speed underwater weapons, characterization of the boundary layer flow-induced noise received by a Sound NAvigation and Ranging ... -
Computational Modelling Of Heat Transfer In Reheat Furnaces
(Indian Institute of Science, 2006-08-24)Furnaces that heat metal parts (blooms) prior to hot-working processes such as rolling or forging are called pre-forming reheat furnaces. In these furnaces, the fundamental idea is to heat the blooms to a prescribed ... -
Continuum Analysis of Cavitation Induced Failure and Tensile Deformation Response of Metallic Glasses & Nanoglasses
Metallic glasses (MGs), which are metals solidified in an amorphous state, have shown attractive mechanical properties such as high strength (up to 5 GPa), yield strain (around 2%) and good corrosion resistance. They ... -
Continuum Modeling Of Adhesive Interaction Based On Interatomic Potentials
(2018-01-12)Adhesion between solid bodies plays a prominent role in a wide variety of situations ranging from tribological applications to dust coagulation initiating the formation of planets. It can be due to various reasons like ... -
Cylindrical Fretting And Delamination : Axisymmetric Static And Dynamic Analysis
(2011-01-17)Axisymmetric analysis of cylindrical contacts is considered in the context of axisymmetric assemblies such as shrink-fits. Fretting fatigue induces sub-critical cracks along the contact interface of press fits especially ... -
Design and Development of a Novel Solar Thermal Receiver
One of the most widely used solar collectors for process heating and large scale electricity generation is the parabolic trough collector (PTC), in which a tube placed at the focus of the parabola receives concentrated ... -
Design and Development of a Three-degree-of-freedom Parallel Manipulator to Track the Sun for Concentrated Solar Power Towers
(2018-05-21)In concentrated solar power (CSP) stations, large arrays of mirrors which are capable of changing its orientation are used to reflect the incident solar energy to a stationary receiver kept at a distance. Such mirrors are ... -
Design and Development of Capacitive Micromachined Ultrasonic Transducers
(2018-02-22)This thesis presents the design and analysis for development of a Capacitive Micromachined Ultrasonic Transducer (CMUT), a novel sensor and actuator, aimed at replacing the conventional piezoelectric transducers for ... -
Design Of Two-Axis Displacement-Amplifying Compliant Mechanisms Using Topology Optimization
(2010-07-14)This thesis deals with the design of two-axis displacement-amplifying compliant mechanisms (DaCMs) using topology optimization. The two-axis compliant mechanisms considered here are XY positioners and two-axis inertial ... -
Design, Analysis, Simulation and Experimentation of a Flexible Spine Quadruped
Quadrupeds robots can move on uneven and rough terrain where mobile robots cannot venture. Al-though bipeds have more capabilities, they are inherently unstable and difficult to control. Most quadrupeds today are built ... -
Development And Investigation of Two-Stage Silica Gel + Water Adsorption Cooling Cum Desalination System
(2017-09-20)The present research work caters to two important needs of rural India: i) desalination of subsoil/coastal brackish water and ii) basic refrigeration for short term preservations of agro-produce, medicines etc. Fortunately, ... -
Development Of An Activated Carbon+ HFC 134a Adsorption Refrigeration System
(2009-04-01)The demands facing the refrigeration industry are minimal usage of conventional energy sources for compression and avoidance of ozone depleting substances. One of the approaches to combat these issues is the use of thermally ... -
Development of Microstructure, Texture and Residual Stresses during Friction Stir Processing of Aluminium Alloys
Friction Stir Processing (FSP) is emerging as one of the most competent Severe Plastic Deformation (SPD) methods for producing bulk ultra-fine grained materials with improved properties. The significant advantage of FSP ...