Show simple item record

dc.contributor.advisorGhosh, Ambarish
dc.contributor.authorParia, Debadrita
dc.date.accessioned2018-09-07T04:52:44Z
dc.date.available2018-09-07T04:52:44Z
dc.date.submitted2018
dc.identifier.urihttps://etd.iisc.ac.in/handle/2005/4034
dc.description.abstractGraphene is the thinnest material known till date, composed of a two dimensional (2D) arrangement of carbon atoms in a hexagonal lattice. It has interesting mechanical, electrical and optical properties, such as very high mechanical strength, large carrier mobility, short carrier life time, very high electrical and thermal conductivity and high optical transparency. Considering all these unique properties, graphene is predicted to revoutionize various elds of research pertaining to electronics, photonics, opto-electronics, photovoltaics, energy storage, biological and chemical sensing. Of particular interest is the suitability of graphene in opto-electronic applications arising from two important properties. Firstly, it shows ultrafast and broadband optical absorption with spectral range covering from ultra violet to far infra red. Secondly, it is possible to modulate its optical properties by doping or electrical gating which changes the Fermi level. Unfortunately, photonic applications of graphene suffer from two major disadvantages: (i) graphene absorbs only 2.3% of the incident light (ii) lack of band gap which does not allow spectral selectivity, thus making it unusable for operation as a switch or use in LEDs. One way to improve the light-matter interaction in graphene beyond its intrinsic 2.3% absorption efficiency, is to use plasmonic nanostructures in close proximity. The optical near eld associated with nano particles of noble metals, particularly around their plasmon resonance frequency can increase the local electromagnetic eld in the vicinity of graphene. Apart from enhancing the light matter interaction, spectral tunability can be achieved by integration of plasmonic nanostructures with graphene. In the present study, graphene is integrated with plasmonic nanostructures and enhanced photodetection is achieved in the UV, visible and mid-IR regions of the electro-magnetic spectrum. Novel schemes are developed for large area integration and patterning of graphene-plasmonic hybrid systems, using a combination of fabrication processes, materials and con guration strategies. This enables a high level of control over the specral characteristics of the graphene-plasmonic hybrid photodetectors, ranging between deep UV and mid-IR. Photodetection in the UV is achieved by integrating a single array of silver nanoparticles with a single layer graphene. Spectral photocharacteristics of the device show two enhanced peaks, one due to near field enhancement and the other due to enhanced absorption in graphene near the M point combined with disorder due to the presence of silver nanoparticles. The device responsivity achieved is orders of magnitude higher than commercial UV detectors. Designs for maximising the field enhancement and photoresponse in the visible is analysed using numerical simulations. Different interparticle distances, orientations and materials are studied in detail for maximising the near eld. The lowest possible in-erparticle distance for achieving maximum eld enhancement is around 0.3 nm, below which quantum tunnelling is believed to quench the eld enhancement. A novel fabrication scheme leads to the the smallest possible plasmonic gap, equal to the thickness of a single layer graphene. The near eld is highly enhanced at the junction of the nanoparticles and photovoltage achieved in the visible region is 300 times more than the existing graphene-plasmonic photodetectors. An alternate plasmonic material is also explored and the photodetection is extended to the IR region. Highly doped trans-parent conducting oxide lm is optimized for a high carrier density and patterned with electron beam lithography for integration with graphene in order to sensitize graphene in the mid IR. Our devices show sensitivity better than existing commercial detectors and the fabrication methods are also modular and scalable. We believe these technologies can be extended to many other applications, such as SERS, photocatalysis and optical sensing.en_US
dc.language.isoen_USen_US
dc.relation.ispartofseriesG28535;
dc.rightsI grant Indian Institute of Science the right to archive and to make available my thesis or dissertation in whole or in part in all f orms of media, now hereafter known. I retain all proprietary rights, such as patent rights. I also retain the right to use in future works (such as articles or books) all or part of this thesis or dissertationen_US
dc.subjectPlasmonic Nanostructuresen_US
dc.subjectPhotodetectorsen_US
dc.subjectPlasmon Resonanceen_US
dc.subjectGrapheneen_US
dc.subjectPlasmonic Materialsen_US
dc.subjectPlasmonic Dimersen_US
dc.subjectPlasmonic Dimer Geometryen_US
dc.subjectPlasmonic Nano Materialen_US
dc.subjectGraphene-Silver Hybrid Devicesen_US
dc.subjectGraphene-Agen_US
dc.subject.classificationNano Science and Engineeringen_US
dc.titleIntegration of Graphene with Plasmonic Nanostructures for Photodetection in the UV, Visible and IRen_US
dc.degree.namePhDen_US
dc.degree.levelDoctoralen_US
dc.degree.grantorIndian Institute of Scienceen_US
dc.degree.disciplineEngineeringen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record