Department of Design and Manufacturing (DM, earlier called CPDM): Recent submissions
Now showing items 41-60 of 84
-
A Feasibility Map-Based Framework and Its Implementation for Selection in Engineering Design
(2018-06-26)A pragmatic method for selecting components and devices from a database or parameterized models is developed in this thesis. The quantitative framework presented here is sufficiently general to accommodate an entire device ... -
Analysis of Vehicle Dynamics and Control of Occupant Biodynamics using a Novel Multi-Occupant Vehicle Model
(2018-06-26)Due to the detrimental effects of ride vibrations on occupants and increasing safety concerns, improvement in vehicle dynamic characteristics has become a key focus of researchers. Typically, ride and handling problems ... -
Advanced Numerical Approaches for Analysis of Vehicle Ride Comfort, Wheel Bearings and Steering Control
(2018-06-23)Suspension systems and wheels play a critical role in vehicle dynamics performance of a car in areas such as ride comfort and handling. Lumped parameter models (LPMs) are commonly used for assessing the performance of ... -
Development of Multipoint Haptic Device for Spatial Palpation
(2018-05-25)This thesis deals with the development of novel haptic array system that can render distributed pressure pattern. The haptic devices are force feedback interfaces, which are widely seen from consumer products to tele-surgical ... -
An Advanced Study on Jute-Polyester Composites for Mechanical Design and Impact Safety Applications
(2018-05-14)Natural fiber-reinforced composites are now finding extensive uses in various fields from household articles to automobiles. These composites can score high compared to common synthetic fiber-based composites, notably glass ... -
Finite Element Modeling of Knee Joint to Study Tibio-Femoral Contact Machanics
(2018-05-10)Articular cartilage covers the articulating ends of diarthrodial joints. It plays a vital role in the function of the musculoskeletal system by allowing almost frictionless motion to occur between the articular surfaces ... -
Natural Hand Based Interaction Simulation using a Digital Hand
(2018-04-12)The focus of the present work is natural human like grasping, for realistic performance simulations in digital human modelling (DHM) environment. The performance simulation for grasping in DHM is typically done through ... -
Development of 2D and 3D Sketching Environment to Support Early Phases of Design
(2018-04-06)The traditional pen-paper sketching is extensively used in the early stages of product design as it supports creative exploration of product concepts and provides a fluidic mode for the expression of ideas. The Computer ... -
Mechanical Characterization of Adhesively Bonded Jute Composite Joints under Monotonic and Cyclic Loading Conditions
(2018-03-15)Fiber-reinforced composites comprise an important class of lightweight materials which are finding increasing applications in engineering structures including body components of automobiles and aircraft. Traditionally, ... -
Feature-based Approach for Semantic Interoperability of Shape Models
(2018-02-20)Semantic interoperability (SI) of a product model refers to automatic exchange of meaning associated with the product data, among applications/domains throughout the product development cycle. In the product development ... -
Semiotic Studies on Holistic Order in Product Design
(2018-02-16)‘Holistic Order’ is a new term used in this study. In literature, its synonyms such as beauty, order, visual order, and aesthetic order have been in usage for a long time. Historical studies on arts & crafts from philosophical ... -
Prediction of Physical Behavior of Rotating Blades under Tip-Rub Impact using Numerical Modeling
(2018-02-09)Rotating blades, which are the most critical components of any turbo-machinery, need to be designed to withstand forced vibrations due to accidental tip rub impact against inner surface of casing. These vibrations are ... -
Studies on Glass Fiber-Reinforced Composites for CAE-Driven Design of Impact Safety Countermeasures
(2018-01-29)Man-made materials such as fiber-reinforced composites (FRCs) can be tailored for optimum performance in product design applications in terms of strength and weight. The current work is aimed at studying the behaviors of ... -
The Effect of Mismatch of Total Knee Replacement Components with Knee Joint : A Finite Element Analysis
(2018-01-10)It has been noticed that the need for total knee replacement surgery is increasing for Asian region. A total knee replacement is a permanent surgical solution for a patient having debilitating pain in knee joint suffering ... -
A Geometric Approach for Discrete and Statistical Reach Analysis for a DHM with Mutable Supports
(2017-12-05)Conventional ergonomics analysis involves building physical mockups and conducting simulated operations, such that the constraints experienced by the human subjects can be directly observed. The limitations of this approach ... -
Methodologies for Assessment of Impact Dynamic Responses
(2017-11-24)Evaluation of the performance of a product and its components under impact loading is one of the key considerations in design. In order to assess resistance to damage or ability to absorb energy through plastic deformation ... -
Synthesis of Conceptual Designs for Sensors
(2017-11-24)A computer-aided technique is developed in this thesis to systematically generate concepts for sensors of a wide variety. A database of building blocks, based on physical laws and effects that capture the transduction rules ... -
Sustainability by Design : A Descriptive Model of Interaction and a Prescriptive Framework for Intervention
(2017-11-13)Introduction: Sustainability is humanity’s collective ability to sustain development that meets the needs of the present without compromising the ability of the future generations to meet their own needs. Preceding closely ... -
An Integrated Framework for Supporting Decision Making During Early Design Stages on End-of-Life Product Disassembly
(2017-10-31)Product life cycle (PLC) is the cycle which every product goes through from introduction to eventual demise. There are several issues with the current life cycle of a product when looked from the environmental impact ... -
Study of Synergy between Plastic Deformation Mechanisms, Tribo-oxidation And Mechanically Mixed Layers in Tribology Of Ti-6Al-4V Slid Against SS316L And Alumina
(2017-10-11)Alloys of titanium are highly preferred materials for their excellent strength to weight ratio but the tribological issues while using them has been posing challenging issues for the tribological analyst, which are still ...