Browsing Aerospace Engineering (AE) by Title
Now showing items 48-67 of 400
-
Cerium Oxide Based Active Catalyst for Green Hydroxylammonium Nitrate (HAN) Fueled Monopropellant Thruster
Monopropellants are widely used for propulsion and gas generation applications. The current state of art monopropellant systems are based on hydrazine propellants. While hydrazine has a strong heritage as a versatile ... -
Characterization and Control of Boundary Layer Transition Caused by Distributed Surface Roughness
Distributed roughness occurs over a variety of aerodynamic surfaces such as wind-/gas-turbine blades and aircraft wings in the form of dust, insect strikes, fouling or icing. The disturbances introduced by the roughness ... -
Characterization of a large scale hypersonic shock tunnel and investigation of the effect of roughness on a large cone boundary layer flow
High speed flight is ridden with engineering challenges, some of which have been studied for decades with only minor improvements. Boundary layer transition to turbulence in highMach number flow is one such topic, which, ... -
Characterization of Cure Residual Strain in CFRPs
Fiber reinforced plastic (FRP) structures are widely used compared to metallic structures due to their superior mechanical properties and lightweight. However, anisotropy and heterogeneity inherent to FRPs cause a multitude ... -
Characterization of high enthalpy flows in the IISc free-piston driven shock tunnel using Two-Colour Ratio Pyrometry
High temperature and its associated effects set the hypersonic flow regime apart from other class of flows. Viscous dissipation raises the internal energy of the high-kinetic-energy gas as it slows down in the boundary ... -
Closed-form Solutions For Rotating And Non-rotating Beams : An Inverse Problem Approach
(2012-12-04)Rotating Euler-Bernoulli beams and non-homogeneous Timoshenko beams are widely used to model important engineering structures. Hence the vibration analyses of these beams are an important problem from a structural dynamics ... -
Co-operative Destabilization of a Flat Plate Boundary Layer by a Free Stream Convecting Vortex and Wall Suction/Blowing
The stability of wall bounded shear layer at subcritical Reynolds number disturbed by a freestream convecting vortex and unsteady suction/blowing at the wall was studied. A counterclockwise line vortex was convected parallel ... -
Collision Avoidance And Coalition Formation Of Multiple Unmanned Aerial Vechicles In High Density Traffic Environments
(2014-08-07)This thesis addresses the problems of collision avoidance and coalition formation of multiple UAVs in high density traffic environments, proposes simple and efficient algorithms as solutions, and discusses their applications ... -
Combustion Instability Screech In Gas Turbine Afterburner
(2009-08-04)Gas turbine reheat thrust augmenters known as afterburners are used to provide additional thrust during emergencies, take off, combat, and in supersonic flight of high-performance aircrafts. During the course of reheat ... -
Compressible Mixing of Dissimilar Gases
(2018-03-22)This thesis is concerned with the study of parallel mixing of two dissimilar gases under compressible conditions in the confined environment. A number of numerical studies are reported in the literature for the compressible ... -
Computational Studies On Certain Problems Of Combustion Instability In Solid Propellants
(Indian Institute of Science, 2006-11-17)This thesis presents the results and analyses of computational studies on certain problems of combustion instability in solid propellants. Specifically, effects of relaxing certain assumptions made in previous models of ... -
A Computational Study of Structural and Thermo-Mechanical Behavior of Metallic Nanowires
(2018-04-11)This thesis is an attempt to understand ways to improve thermo-mechanical and structural properties of nano-structured materials. A detailed study on computational design and analysis of metallic nanowires is carried out. ... -
Constrained Adaptive Control of Nonlinear Systems with Application to Hypersonic Vehicles
Constraints in input, output, and states are evident in most of the practical systems. Explicitly incorporating these constraints into the control design process leads to its superior performance in general. Therefore, ... -
Constrained Optimal Guidance Design of Interceptors for High-Speed Ballistic Targets
In this thesis, optimal control theory has been applied to design constrained terminal guidance algorithms for interceptor to destroy incoming high speed ballistic targets. There exist several optimal guidance algorithms ... -
Continuous-Curvature Path Planning Using Four Parameter Logistic Curves
Autonomous vehicles perform time and cost effective operations with minimal or no human effort and hence, have the potential to be used in civilian, commercial and military applications. Pertaining to these applications, ... -
Control and Safety of Multi-UAV Systems for Collaborative Payload Transportation and Target Tracking
Unmanned aerial vehicles (UAVs) have been widely used in reconnaissance, remote sensing, disaster relief, and agricultural applications. Many applications require multiple UAVs to cooperate to complete the assigned tasks. ... -
Control of shock-induced vortex breakdown in Transonic regime on a slender delta wing body configuration using blowing
Modern high speed aircrafts feature highly swept and low aspect ratio wings, mainly to increase the critical Mach number and reduce the wave drag. A special case of swept wings is wings with triangular planform commonly ...