Browsing Aerospace Engineering (AE) by Title
Now showing items 37-56 of 400
-
Automated Meshless CFD Process using Cartesian Point Distribution
The thesis deals with the meshless methods based on generalized finite difference procedure operating on the mere distribution of points. The work per se focuses on maturing the meshless LSFD-U solver as a standard industrial ... -
Automated methods of natural resource mapping with Remote Sensing Big data in Hadoop MapReduce framework
For several decades, remote sensing (RS) tools have provided platforms for the large-scale exploration of natural resources across the planetary bodies of our solar system. In the context of Indian remote sensing, mineral ... -
An Autonomous Guidance Scheme For Orbital Rendezvous
(Indian Institute of Science, 2005-07-15)The word 'rendezvous' implies a pre-arranged meeting between two entities for a specific purpose. This term is used in the study of spacecraft operations, to describe a set of maneuvers performed by two spacecraft in order ... -
Autonomous Landing Of Unmanned Aerial Vehicles
(2010-03-26)In this thesis the problem of autonomous landing of an unmanned aerial vehicle named AE-2 is addressed. The guidance and control technique is developed and demonstrated through numerical simulation results. The complete ... -
Autonomous Navigation Using Global Positioning System
(2011-04-29) -
Autonomous Orbit Estimation For Near Earth Satellites Using Horizon Scanners
(Indian Institute of Science, 2005-10-20)Autonomous navigation is the determination of satellites position and velocity vectors onboard the satellite, using the measurements available onboard. The orbital information of a satellite needs to be obtained to support ... -
Beamforming and Target Tracking Methods for Active RF Phased Array Seekers
The end game guidance and control of an interceptor for neutralization of a hypersonic vehicle or a maneuvering aerial target is a challenging problem. This problem can be addressed in two ways: through faster autopilot ... -
Bearings-Only Information Based Guidance Law for Trajectory Shaping Applications
Munitions like projectiles and artillery mortars follow ballistic trajectory to hit the target. However, unguided munitions may miss the target due to external disturbances or errors in aerodynamic modeling. A guided ... -
Blast Mitigation Strategies for Marine Sandwich Structures
Blast mitigation is being researched from the time of world war II. There were full field blast tests and analytical studies on the performance of monolithic structures to mitigate blast load. Sandwich structures were also ... -
Breakup Behaviour Of Liquid Sheets Discharging From Gas Centered Swirl Coaxial Atomizers
(2011-04-06)This thesis aims at studying the breakup of swirling liquid sheets discharging from the outer orifice of gas centered swirl coaxial atomizers. Such atomizers are considered as propellant injection systems for semi-cryogenic ... -
Bubble and conical forms of vortex breakdown in swirling jets
The present study focusses on vortex breakdown (VB), which occurs in axially convected swirling flows and is characterized by the development of an internal stagnation point and regions of reverse flow. VB has been ... -
Cerium Oxide Based Active Catalyst for Green Hydroxylammonium Nitrate (HAN) Fueled Monopropellant Thruster
Monopropellants are widely used for propulsion and gas generation applications. The current state of art monopropellant systems are based on hydrazine propellants. While hydrazine has a strong heritage as a versatile ... -
Characterization and Control of Boundary Layer Transition Caused by Distributed Surface Roughness
Distributed roughness occurs over a variety of aerodynamic surfaces such as wind-/gas-turbine blades and aircraft wings in the form of dust, insect strikes, fouling or icing. The disturbances introduced by the roughness ... -
Characterization of a large scale hypersonic shock tunnel and investigation of the effect of roughness on a large cone boundary layer flow
High speed flight is ridden with engineering challenges, some of which have been studied for decades with only minor improvements. Boundary layer transition to turbulence in highMach number flow is one such topic, which, ... -
Characterization of Cure Residual Strain in CFRPs
Fiber reinforced plastic (FRP) structures are widely used compared to metallic structures due to their superior mechanical properties and lightweight. However, anisotropy and heterogeneity inherent to FRPs cause a multitude ... -
Characterization of high enthalpy flows in the IISc free-piston driven shock tunnel using Two-Colour Ratio Pyrometry
High temperature and its associated effects set the hypersonic flow regime apart from other class of flows. Viscous dissipation raises the internal energy of the high-kinetic-energy gas as it slows down in the boundary ... -
Closed-form Solutions For Rotating And Non-rotating Beams : An Inverse Problem Approach
(2012-12-04)Rotating Euler-Bernoulli beams and non-homogeneous Timoshenko beams are widely used to model important engineering structures. Hence the vibration analyses of these beams are an important problem from a structural dynamics ... -
Co-operative Destabilization of a Flat Plate Boundary Layer by a Free Stream Convecting Vortex and Wall Suction/Blowing
The stability of wall bounded shear layer at subcritical Reynolds number disturbed by a freestream convecting vortex and unsteady suction/blowing at the wall was studied. A counterclockwise line vortex was convected parallel ... -
Collision Avoidance And Coalition Formation Of Multiple Unmanned Aerial Vechicles In High Density Traffic Environments
(2014-08-07)This thesis addresses the problems of collision avoidance and coalition formation of multiple UAVs in high density traffic environments, proposes simple and efficient algorithms as solutions, and discusses their applications ...