Division of Mechanical Sciences: Recent submissions
Now showing items 1181-1200 of 1915
-
Prediction Of The Mechanical Behaviour Of A Closed Cell Aluminium Foam Using Advanced Nonlinear Finite Element Modelling
(2016-05-06)Cellular materials like aluminum foam which is the subject of interest here are generally characterized by high energy absorption capacity per unit weight. Materials of this category can be ideal for applications such as ... -
Study Of Solidification And Microstructure Produced By Cooling Slope Method
(2016-05-05)In most casting applications, dendritic microstructure morphology is not desired because it leads to poor mechanical properties. Forced convection causing sufficient shearing in the mushy zone of the partially solidified ... -
Variation Of Marine Boundary Layer Characteristic Over Bay Of Bengal And Arabian Sea
(2016-05-04)The atmospheric boundary layer (ABL) is the lowest layer of the atmosphere where surface effects are felt on time scales of about an hour. While its properties are determined by the surface characteristics, season and ... -
Tensile Behavior Of Free-Standing Pt-Aluminide (PtAl) Bond Coats
(2016-05-03)Pt-aluminide (PtAl) coatings form an integral part of thermal barrier coating (TBC) systems that are applied on Ni-based superalloy components operating in the hot sections of gas turbine engines. These coatings serve as ... -
Modeling The Population Dynamics Of Erythrocytes To Identify Optimal Drug Dosages For The Treatment Of Hepatitis C Virus Infection
(2016-04-28)The current treatment for hepatitis C virus (HCV) infection – combination therapy with pegylated interferon and ribavirin – elicits sustained responses in only ~50% of the patients treated. Greater cumulative exposure ... -
Determination Of Isopectral Rotating And Non-Rotating Beams
(2016-04-27)In this work, rotating beams which are isospectral to non-rotating beams are studied. A rotating beam is isospectral to a non-rotating beam if both the beams have the same spectral properties i.e; both the beams have the ... -
Behaviour Of Geosynthetic Reinforced Soil–Aggregate Systems Under Static, Repeated And Cyclic Loads
(2016-04-26)Efficient road network and connectivity play vital role in the development of any country. Majority of the rural roads are unpaved and connectivity of rural roads is always a major challenge. Unpaved roads are also used ... -
An Investigation On The Effect Of Structural And Microstructural Attributes On Magnetostriction Of Tb-Dy-Fe And Fe-Ga Alloys
(2016-04-26)Giant magnetostrictive RFe2 type (R represents rare earths) intermetallics form an important class of magnetic materials keeping in view of their potential applications as sensors and/ or actuators. In this thesis, one ... -
A Residual Based h-Adaptive Strategy Employing A Zero Mean Polynomial Reconstruction
(2016-04-18)This thesis deals with the development of a new adaptive algorithm for three-dimensional fluid flows based on a residual error estimator. The residual, known as the R –parameter has been successfully extended to three ... -
Experimental Determination And New Correlations For Multi-Component Solid Solubilities In Supercritical Carbon Dioxide
(2016-03-02)The fluids that are operated above their critical temperature and pressure are known as supercritical fluids (SCFs). SCFs replaces the conventional organic solvents in the chemical processes due to their attractive ... -
Soil Moisture Modelling, Retrieval From Microwave Remote Sensing And Assimilation In A Tropical Watershed
(2016-03-01)The knowledge of soil moisture is of pronounced importance in various applications e.g. flood control, agricultural production and effective water resources management. These applications require the knowledge of spatial ... -
Air-Assited Atomization Strategies For High Viscosity Fuels
(2016-02-25)Atomization of fuel is an important pre-requisite for efficient combustion in devices such as gas turbines, liquid propellant rocket engines, internal combustion engines and incinerators. The overall objective of the present ... -
Confinement, Coarsening And Nonequilibrium Fluctuations In Glassy And Yielding Systems
(2016-02-17)One of the most important and interesting unsolved problems of science is the nature of glassy dynamics and the glass transition. It is quite an old problem, and starting from the early20th century there have been many ... -
Water Soluble Inorganic Aerosol Chemical Characteristics Over An Urban Site In Southern India
(2015-12-08)Aerosol are solid or liquid particles suspended in the atmosphere ranging in size from 10 3 to 102 m. Aerosol influence both the regional and global climate of the earth by its direct and indirect effect. Role of atmospheric ... -
Systematic Synthesis And Analysis Of Multi-DOF Toggle Mechanisms For Electrical Switches
(2015-12-07)Electrical switches are ubiquitous. Performance requirement for a switch is stringent. The operating mechanism mostly decides the performance of an electromechanical switch. However, design of such mechanisms, which involve ... -
Modeling Lysis Dynamcis Of Pore Forming Toxins And Determination Of Mechanical Properties Of Soft Materials
(2015-08-07)Pore forming toxins are known for their ability to efficiently form transmembrane pores which eventually leads to cell lysis. PFTs have potential applications in devel-oping novel drug and gene delivery strategies. Although ... -
Understanding And Supporting Conceptual Design Synthesis Of Multiple State Mechanical Devices
(2015-08-07)Conceptual design synthesis is part of the conceptual phase of the design process, which focuses on creating alternative, candidate solutions. Conceptual design phase has the greatest influence on the cost and characteristics ... -
Evolution Of Texture And Microstructure In Some NiTi Based Alloys And Their Impact On Shape Memory Behavior
(2015-07-08)NiTi based shape memory alloys (SMA) cover most of the commercially produced shape memory devices and components. The reversible martensitic transformation between the phases B2 (austenite) and B19′ (martensite) is responsible ... -
Study Of Stall Flutter Of An Isolated Blade In A Low Reynolds Number Incompressible Flow
(2015-07-08)Highly-loaded turbomachine blades can stall under off-design conditions. In this regime, the flow can separate close to the leading edge of the blade in a periodic manner that can lead to blade vibrations, commonly referred ... -
Studies On Synthesizing Fe And Fe-Cu Nanopowders By Levitational Gas Condensation Process And Their Consolidation Characteristics
(2015-02-25)There exist large number of techniques for the preparation of nanostructured materials. Among them the preparation of nanopowders by gas/vapour condensation is a popular one. Because of very high level of surface to volume ...