Search
Now showing items 1541-1550 of 2181
Mechanical Reliability of Metal-Si Systems at different Length scales under Thermal Cyclic Loading
Metal structures of nanometer to micrometer sizes in different configurations, such as thin films, thick coatings and 3D interconnects, are widely used for conducting electrical signals in several semiconductor-based ...
Electric Field-Guided Alignment of Carbon Nanotubes in Polymer Matrix Composites for Structural Applications
Carbon nanotubes (CNTs) have been extensively researched for diverse applications in recent years. In the present work, the use of low frequency non-uniform alternating electric fields to manipulate the alignment behavior ...
Electrochemical Behavior of Metallic Coatings Containing Carbonaceous Additives
Coatings have been traditionally used for protection against corrosion. Therefore, substantial efforts have been focused on engineering the microstructure and morphology of coatings to enhance their corrosion resistance ...
Fuel Drop Splashing on Heated Solid Surfaces
Droplet-wall interactions on heated surfaces are significantly encountered in applications such as fuel spray impingement in combustors and spray cooling. The present thesis is focused on the splashing of fuel drops on ...
Evaluating Climate Change Mitigation & Adaptation Potential of Sustainable Urban Transport Measures in India
The global climate is transforming due to increased GHG emissions. Globally, the response to climate change has been through mitigation to reduce greenhouse gas emissions. Urban transportation is the second leading source ...
Direct Estimation of Acoustic Source Characteristics of the Internal Combustion Engine Exhaust System and Analysis of Complex Muffler Configurations
Reduction in noise radiated from the IC engines is needed to meet the ever increasingly stringent noise regulations. The unmuffled exhaust noise of an IC engine is the biggest contributor to the overall engine noise. ...
Micromechanical modeling of fracture and fatigue behavior of cementitious composites
The ubiquitous use of concrete as a construction material in the civil engineering industry
demands a thorough understanding of its failure process under different types of loading.
The composite nature of cementitious ...
On a Few Non-Classical Perspectives in Solid Mechanics
Postulates in solid mechanics can be broadly classified into three groups describing the geometry of a configuration, mechanical equilibrium and thermodynamics of the deformation process. The geometry defined on a configuration ...
Role of Physico-chemical Processes And Micro-structural Features in Influencing Moisture Loss and Engineering Properties Of Compacted Residual Soils Exposed To Environmental Relative Humidity
The moisture content of residual soils above the water table, and near ground
surface (≤ 6 m) is influenced by the environmental relative humidity (RH). The focus of
this thesis is to examine the physico-chemical and ...
At-site and Multisite Probabilistic Forecasting of Streamflow
Streamflow forecasts are very useful for a variety of applications such as flood warning, reservoir operation and water resources planning and management, especially in countries like India where streamflow can be highly ...

