Search
Now showing items 71-80 of 81
Microstructure – texture - mechanical property correlation in additively manufactured stainless Steel 316L and Cu-Ni-Sn
Metal additive manufacturing (AM) has gained considerable interest in recent years because of its ability of near net shape building of the components, one-go production, ability to make intricate designs and minimized ...
Potential Applications of Snail Mucus in Cartilage Repair and Fabrication of Porous 3D Scaffolds
Articular cartilage damage is a major challenge in orthopedics. This medical condition is exacerbated by the cartilage's inability to self-repair due to the non-vascularization of the tissue and many other factors. Several ...
Effect of Processing Mg-6zn-0.2ce Through High-pressure Torsion on Its Use as a Biomaterial
Here, we investigate the effect of high-pressure torsion (HPT), a severe plastic deformation process, on the mechanical properties, corrosion, and cytotoxicity of Mg-6Zn-0.2Ce alloy, a candidate material for bioresorbable ...
High-Throughput Bending Tests for Investigating Creep Behavior Affected by Structural and Microstructural Inhomogeneities
The bending of cantilevers is an alternate technique for the extraction of power-law creep parameters of materials. It has been shown earlier that in homogeneous systems showing tension-compression symmetry, digital image ...
Microstructure-Corrosion Property Correlation in Electrodeposited Sn and Cu Based Coating Systems
Conventional metallic coatings are widely used for protection against corrosion. This study investigates the correlation between microstructure and corrosion properties in SnCr and CuCr electrodeposited coatings. The wide ...
Investigations of Sensors Based on New Molecular Architectonics: Synthesis, Fabrication and Application
Rapid industrialization and expansion of urban landscapes in large cities generate maximum
polluting ingredients to the surrounding environment. While organic contaminants are
naturally occurring, the increase in human ...
Effect of Electric Current Pulses on Pre-cracked Thin Metallic Conductors: From Crack Propagation to Healing of Cracks
Both scientifically and technologically, it is important to investigate the effects of electric current on the structural integrity of metallic components. As an electric current reverses its direction across a crack, ...
Inkjet-printed high performance oxide electronics and its application at sensor interfaces
Over the last two decades, printing of oxide semiconductors has received special attention due to its advantages such as low processing temperature, even at room temperature; high electron mobility; good transparency due ...
Thermoplastic epoxy designed using Vitrimer chemistries
Globally, 70 million tons of epoxy thermosets are manufactured at a perplexing rate which constitutes approximately a quarter of polymer generation by weight. A thermosetting polymer contains a permanent crosslinked network ...
Effect of thermo-mechanical treatment on the evolution of microstructure and mechanical properties in a β and a β rich α+β titanium alloy
Near β and metastable β-titanium alloys are difficult to process due to narrow processing window. Lower processing temperature causes difficulty in recrystallization of these alloys especially in the two phase conditions, ...