Search
Now showing items 41-50 of 81
Role of in-phase octahedral tilt influencing structure and properties in Na0.5Bi0.5TiO3 - based piezoceramics
High performance perovskite (ABO3) based piezoceramics are used as actuators, pressure sensors, and transducers in wide-ranging applications spanning sectors like health, space, defence and automobiles. For over four ...
Co-continuous microstructures through spinodal decomposition in ternary systems: A phase field study
We have studied spinodal decomposition which leads to a three-phase microstructure in ternary
alloys using computer simulations based on the ternary Cahn-Hilliard equations. All the alloys
we have studied are in the same ...
Pseudo-binary and Pseudo-ternary diffusion couple methods for understanding the growth of interdiffusion zone between bond coat and superalloys
Ni-based superalloys are widely used in jet engine applications. Bond coats are applied to these alloys for protection during service in a very harsh environment at high operating temperature. The addition of Pt to the ...
Optimization of parameters in SiC production via Acheson Process – a hot model study
Silicon carbide (SiC) is produced industrially in a heat resistance furnace using quartz (silica) and raw petroleum coke (RPC) as the raw material. In this process, commonly known as the Acheson Process, a large current ...
Development of wrought Mg-Li based alloys with improved strength and ductility
A comprehensive investigation has been undertaken to develop cold rolled Mg-Li based alloys with tensile properties superior to the existing commercial or experimental Mg-Li based alloys. In this endeavor, melting and ...
Structure property correlation studies on Ca-modified Ba(Ti, Zr/Sn)O3 piezoceramics
In this thesis we have investigated the structure, property correlation of the lead-free piezoelectric ceramic of (Ba,Ca) (Ti,Zr/Sn)O3 system. A self-consistent set of experimental techniques such as X-ray powder diffraction, ...
Structure-Property Correlation in Binary Immiscible Polymer Blends Compatibilized by Mutually Miscible Homopolymer and Carbonaceous Nanoparticles
The thesis systematically studies the various morphology, mechanical properties, crystallization kinetics and compatibilization effects of homopolymers, carbonaceous nanoparticles such as multiwall carbon nanotubes (MWNTs), ...
Effect of processing on texture and microstructure in Aluminium-Lithium alloys and its consequences on mechanical properties
Lightweight Aluminium -Lithium based alloys have high potential for use in aerospace structural components. However, large anisotropy in mechanical properties restricts the use of these alloys. The alloy AA2195 (Al-Li-Cu-Mg-Ag-Zr) ...
Microstructure and texture engineering strategies to enhance the corrosion resistance of tin based coatings
Coating corrosion-prone material with metal/alloy and passivated oxide layers is the primary protection method in the ever-evolving corrosion protection area. To improve the corrosion resistance of the coatings, the coating ...
Development of a coarsening resistant microstructure in precipitation strengthened aluminium alloys with Zr, Ta and Hf
The work herein aims at developing precipitation-strengthened aluminium-copper (Al-Cu) alloys that can meet the current challenges of the aeronautical and automobile sectors to increase the fuel efficiency where operating ...