Search
Now showing items 771-780 of 993
Investigations On The Properties Of TiN, NbN Thin Films And Multilayers By Reactive Pulsed Laser Deposition
(2013-10-21)
Two technologies, namely Laser Technology and Surface Modification Technology, have made rapid strides in the last few decades. The lasers have evolved from a simple laboratory curiosity to a matured industrial tool and ...
Development Of Cast Magnesium Alloys With Improved Strength
(2014-05-15)
Aim of the present work was to explore the possibility of improving strength of cast Mg by alloying additions, viz., Si and Zn+Al. All the alloys were produced by squeeze casting technique using squeeze pressure of 12MPa ...
Fatigue Damage Characterization Of Carbon/Epoxy Laminates Under Spectrum Loading
(2013-10-04)
Fibre Reinforced Polymer Composites are extensively used in aircraft structures because of its high specific stiffness, high specific strength and tailorability. Though Fibre Reinforced Polymers offer many advantages, they ...
Single Cavity Trapped Vortex Combustor Dynamics : Experiments & Simulations
(2011-04-06)
Trapped Vortex Combustor (TVC) is a relatively new concept for potential use in gas turbine engines addressing ever increasing demands of high efficiency, low emissions, low pressure drop, and improved pattern factor. This ...
Conjugate Natural Convection In Horizontal Annuli
(2011-06-23)
Nanotribology Of Emulsified Lubricants
(2011-07-01)
In case of metalworking operations, the purpose of lubrication is served by a complex mixture of two or more phases, these mixtures are known as metalworking fluids (MWFs). For many decades oil-in-water emulsions have been ...
A Study Of Crystallographic Texture, Residual Stresses And Mechanical Property Anisotropy In Aluminium Alloys For Space Applications
(2013-05-21)
Aluminium alloys, which are the most widely used materials in the aircraft and aerospace industries, find their applications due to high strength–to-density ratio, resistance to catastrophic fracture, high degree of ...