Browsing Division of Mechanical Sciences by Subject "Friction"
Now showing items 1-7 of 7
-
Estimation and Control of Friction in Bulk Plastic Deformation Process
Friction plays a significant role in bulk plastic deformation processes in controlling the tool life, formability of the work piece material and the quality of the finished product such as, surface finish, microstructure ... -
Fundamental Studies On Tribological Response Of Titanium And Copper
(2007-08-22)Friction and wear have been observed m mechanical systems when there is a relative motion between two solid bodies Friction mainly results in loss of energy and wear results in matenal loss The proper understanding of ... -
Influence of Surface Topography and Tribosystem on Reciprocating Friction in Sparsely Lubricated Contacts
Surface texturing to achieve reduced sliding friction has been a widely studied topic, as seen in contemporary literature. Laser surface texturing, grinding and ion beam milling are popular techniques accepted by researchers ... -
Measurement And Analysis Of Friction Induced By A Cutting Operation Lubricated By Oil In Water Emulsion
(2013-09-05)The lubricants that are applied during metal cutting acts on the interface between the tool and the nascent surfaces generated by the cutting process. Dispersions of oil in water made using suitable emulsifier(s) are used ... -
Nanotribology Of Emulsified Lubricants
(2011-07-01)In case of metalworking operations, the purpose of lubrication is served by a complex mixture of two or more phases, these mixtures are known as metalworking fluids (MWFs). For many decades oil-in-water emulsions have been ... -
Study Of Multiple Asperity Sliding Contacts
(2016-06-18)Surfaces are rough, unless special care is taken to make them atomically smooth. Roughness exists at all scales, and any surface-producing operation affects the roughness in certain degrees, specific to the production ... -
Transfer Layer Formation And Friction In Extrusion Of Aluminum : An Experimental Study Using A High Temperature Vacuum Based Pin-On-Disc Machine
(2010-09-21)Hot extrusion of aluminum is widely practiced in industries for economic production of structural components. The surface finish and tolerance of the extruded components, both from design and aesthetic requirement, are ...