Browsing Division of Mechanical Sciences by thesis submitted date"2007"
Now showing items 1-20 of 59
-
Advanced Methodologies For Designing Metallic Armour Plates For Ballistic Impact
(2009-09-02)A Primary objective of the present research is the development of robust CAE (Computer-Aided Engineering)-based approaches for designing armour plates subjected to ballistic impact by small-calibre hardened peojectiles ... -
Aerodynamic Analysis Of Grid Fins Using Analytical And Computational Methods
(2009-07-16)Grid fins (lattice fins) are used as a lifting and control surface for highly manoeuvrable missiles. Grid fins also find their applications for air-launched submunitions. The main advantages are its low hinge moment ... -
Analysis Of Coupled-Resonator Slow-Wave Structures For Traveling-Wave Tubes For Aerospace Applications
(2009-04-30)Through continued innovation and growth, traveling wave tube amplifiers (TWTAs) remains the microwave power amplifiers of choice in a wide range of high power microwave and millimeter-wave applications specifically for ... -
Analytical, Numerical, And Experimental Studies Of Fluid Damping In MEMS Devices
(2009-09-11)Fluid damping arising from squeeze film flow of air or some inert gas trapped between an oscillating micro mechanical structure, such as a beam or a plate, and a fixed substrate often dominates the other energy dissipation ... -
An Anti-Skid Brake Controller For A Fighter Aircraft With An Elastic Strut
(2009-04-29)This thesis deals with the design of an anti-skid brake controller for a generic fighter aircraft. Antiskid brake controllers prevent wheel locking and maximize the coefficient of friction between the tyre and the ground, ... -
Automated Kinematic Assembly Modeling
(2013-10-21)The aim of this research is to bridge the gap between CAD modeling and kinematic analysis packages by extracting kinematic information directly from part genometries. It will relieve the designers from the tedious task ... -
Co-operative Destabilization of a Flat Plate Boundary Layer by a Free Stream Convecting Vortex and Wall Suction/Blowing
The stability of wall bounded shear layer at subcritical Reynolds number disturbed by a freestream convecting vortex and unsteady suction/blowing at the wall was studied. A counterclockwise line vortex was convected parallel ... -
Combustion Instability Screech In Gas Turbine Afterburner
(2009-08-04)Gas turbine reheat thrust augmenters known as afterburners are used to provide additional thrust during emergencies, take off, combat, and in supersonic flight of high-performance aircrafts. During the course of reheat ... -
Contact Mechanics Of Layered Structures
(2009-06-30)Contact mechanical study of layered structures is useful to various fields of engineering, such as - mechanical engineering, civil engineering, materials engineering and biomechanics. Thin hard film coating on a compliant ... -
Design And Manufacturing Of Impact Resisting Structures (Aluminium Foam)
(2009-09-02)Metal foams have found increasing applications in a wide range of structural and functional products, due to their exceptional mechanical, thermal, acoustic and electrical properties and offer great potential for lightweight ... -
Development Of A Knowledge-Based Hybrid Methodology For Vehicle Side Impact Safety Design
(2011-08-05)The present research work has been carried out to develop a unified knowledge-based hybrid methodology combining regression-based, lumped parameter and finite element analyses that can be implemented in the initial phase ... -
The Effect Of Energy Deposition In Hypersonic Blunt Body Flow Field
(2010-09-23)A body exposed to hypersonic flow is subjected to extremely high wall heating rates, owing to the conversion of the kinetic energy of the oncoming flow into heat through the formation of shock waves and viscous dissipation ... -
Evolution Of Multivariant Microstuctures With Anisotropic Misfit
(2009-06-17)Many technologically important alloys such as Ni base superalloys and Ti-Al base alloys benefit from the precipitation of an ordered β phase from a disordered α matrix. When the crystallographic symmetry of the β phase is ... -
Experimental And Finite Element Study Of Elastic-Plastic Indentation Of Rough Surfaces
(2009-06-24)Most of the surfaces have roughness down to atomic scales. When two surfaces come into contact, the nature of the roughness determines the properties like friction and wear. Analysis of the rough surface contacts is always ... -
Experimental Investigation Of The Effect Of Nose Cavity On The Aerothermodynamics Of The Missile Shaped Bodies Flying At Hypersonic Mach Numbers
(2010-06-01)Hypersonic vehicles are exposed to severe heating loads during their flight in the atmosphere. In order to minimize the heating problem, a variety of cooling techniques are presently available for hypersonic blunt bodies. ... -
Experimental Investigations Of Surface Interactions Of Shock Heated Gases On High Temperature Materials Using High Enthalpy Shock Tubes
(2009-05-12)The re-entry space vehicles encounter high temperatures when they enter the earth atmosphere and the high temperature air in the shock layer around the body undergoes partial dissociation. Also, the gas molecules injected ... -
Fatigue Damage Characterization Of Carbon/Epoxy Laminates Under Spectrum Loading
(2013-10-04)Fibre Reinforced Polymer Composites are extensively used in aircraft structures because of its high specific stiffness, high specific strength and tailorability. Though Fibre Reinforced Polymers offer many advantages, they ... -
Glowworm Swarm Optimization : A Multimodal Function Optimization Paradigm With Applications To Multiple Signal Source Localization Tasks
(2009-05-05)Multimodal function optimization generally focuses on algorithms to find either a local optimum or the global optimum while avoiding local optima. However, there is another class of optimization problems which have the ... -
HIV Dynamics With Multiple Infections Of Cells And Recombination
(2009-07-14)The ability to accelerate the accumulation of favorable combinations of mutations renders recombination a potent force underlying the emergence of forms of HIV that escape multi-drug therapy and specific host-immune ... -
Hydrodynamics Of An Oscillating Foil With A Long Flexible Trailing Edge
(2010-09-24)In nature, many swimming and flying creatures use the principle of oscillatory lift-based propulsion. Often the flapping element is flexible, totally or partially. The flow dynamics because of a flexible flap is thus of ...