Browsing Division of Mechanical Sciences by thesis submitted date"2005"

Modeling of propagating discontinuities (cracks) is a challenging problem in the field of computational mechanics. Numerical techniques such as Finite Difference Method (FDM), Boundary Element Method (BEM), and Finite ...

Feature Mapping, Associativity And Exchange For Feature-based Product Modelling

Subramani, S (2011-08-16)

Browsing Division of Mechanical Sciences by thesis submitted date"2005"

A 3D High Resolution Unstructured Viscous Flow Solver ﻿

Alkali Induced Heave In Kaolinitic Soils And Remedial Measures ﻿

Behavior Of Partially Prestressed Concrete T-Beams Having Steel Fibers Over Partial Or Full Depth - An Experimental And Analytical Study ﻿

Behaviour Of Geocell Reinforced Foundation Beds ﻿

A Cold Model study Of Raceway Hysteresis ﻿

Creep And Grain Boundary Sliding In A Mg-0.7% Al Alloy ﻿

Critical Speeds And Smart Applications Of Composite Shafts Under Non-Linear Bending ﻿

Cross-Sectional Analysis Of A Pretwisted Anisotropic Strip In The Presence Of Delamination ﻿

Damage Characterization Studies On The Environmentally Degraded (Short-Term Aged) Polymer Matrix Composite Materials Subjected To Single And Repeated Low-Velocity Impacts ﻿

Degradation Of Water Soluble Polymers ﻿

Development And Study Of Oxide Films By Combustion Flame Pyrolysis ﻿

Development Of A General Purpose Flow Solver For Euler Equations ﻿

Development Of CAE-based Methodologies For Designing Head Impact Safety Countermeasures ﻿

The Development Of Triangular Hybrid Axisymmetric Elements ﻿

Effect Of Material Non-Linearity Of Adherends On Fracture Behaviour Of Bimaterial Interface Cracks ﻿

Engineering Seismic Source Models And Strong Ground Motion ﻿

An Enthalpy-Based Micro-scale Model For Evolution Of Equiaxed Dendrites ﻿

Experimental Study Of Side Force Control On Slender Cones At High Angles Of Attack ﻿

Extended finite simulations of cohensive crack propagation under mode-3 loading ﻿

Feature Mapping, Associativity And Exchange For Feature-based Product Modelling ﻿

A 3D High Resolution Unstructured Viscous Flow Solver

Alkali Induced Heave In Kaolinitic Soils And Remedial Measures

Behavior Of Partially Prestressed Concrete T-Beams Having Steel Fibers Over Partial Or Full Depth - An Experimental And Analytical Study

Behaviour Of Geocell Reinforced Foundation Beds

A Cold Model study Of Raceway Hysteresis

Creep And Grain Boundary Sliding In A Mg-0.7% Al Alloy

Critical Speeds And Smart Applications Of Composite Shafts Under Non-Linear Bending

Cross-Sectional Analysis Of A Pretwisted Anisotropic Strip In The Presence Of Delamination

Damage Characterization Studies On The Environmentally Degraded (Short-Term Aged) Polymer Matrix Composite Materials Subjected To Single And Repeated Low-Velocity Impacts

Degradation Of Water Soluble Polymers

Development And Study Of Oxide Films By Combustion Flame Pyrolysis

Development Of A General Purpose Flow Solver For Euler Equations

Development Of CAE-based Methodologies For Designing Head Impact Safety Countermeasures

The Development Of Triangular Hybrid Axisymmetric Elements

Effect Of Material Non-Linearity Of Adherends On Fracture Behaviour Of Bimaterial Interface Cracks

Engineering Seismic Source Models And Strong Ground Motion

An Enthalpy-Based Micro-scale Model For Evolution Of Equiaxed Dendrites

Experimental Study Of Side Force Control On Slender Cones At High Angles Of Attack

Extended finite simulations of cohensive crack propagation under mode-3 loading

Feature Mapping, Associativity And Exchange For Feature-based Product Modelling