Browsing Division of Mechanical Sciences by Title
Now showing items 932-951 of 2234
-
In Situ Transmission Elecron Microscope Triboprobe For Tribological Studies Of Materials At Nanoscale
(2013-09-10)In most of the tribological experiments studying friction and wear behaviour, the contact interface is hidden. The present work attempts to overcome this hidden-interface problem by carrying out real-time tribological ... -
In-Cylinder Experimental and Modeling Studies on Producer Gas Fuelled Operation of Spark Iginited Gas Engines
(2018-08-10)The current work, through experimental and numerical investigations, analyses the process and cycle level deviations in engine response on fuelling multi-cylinder natural gas engines with producer gas. Producer gas is a ... -
In-Situ Polymer Derived Nano Particle Metal Matrix Composites Developed by Friction Stir Processing
(2018-08-10)Ceramic metal matrix composites (CMMCs) are materials generally created by mixing of hard ceramic particles in a metal matrix. They were expected to combine the ductility and toughness of the metal with the high strength ... -
In-Situ Shear Wave Velocity Measurement and Interpretation by Different Methods of Testing
A significant challenge in seismic site classification often arises from the conflicting shear wave velocity (VS) profiles often obtained using different survey methods, further complicated by uncertainties introduced when ... -
In-situ Tribological Experiments to Study - The Effect of Contact Stresses on Raman Scattering
This thesis presents the design, development, and validation of novel instruments that enable in situ micro-Raman spectroscopic measurements at mechanically loaded interfaces: an indentation apparatus for static loading ... -
Inactivation of Microorganisms by Photocatalysis
(2018-02-20)Photocatalysis is an advanced oxidation process, which has shown to possess an enhanced capability to remove a wide range of contaminants. It involves the use of a semiconductor photocatalyst and a photon source. Photocatalysis ... -
Inception of cavitation
Cavitation due to flow separation may occur at pressures higher than the vapor pressure (e.g., where PwP_wPw? is the measured pressure in the cavity and PvP_vPv? is the vapor pressure at the corresponding temperature). The ... -
Inclusive and Eye-Gaze Controlled Human-Robot Interaction for Persons with Severe Speech and Motor Impairment
Most individuals perform various activities of daily living without having to con sciously think and plan about them. People talk, cook their food, move around the house, drive to their workplace and schools, play sports, ... -
Indentation Strength Of Piezoelectric Ceramics
(2011-08-30) -
Inflatable Aerodynamic Decelerators for Atmospheric Re-entry
Atmospheric re-entry is the most challenging part of human space flight. In the re-entry phase of flight, the crew module (or re-entry vehicle) is required to bring the onboard astronauts from orbital velocities, which ... -
Influence of Chemical Coating on Droplet Impact Dynamics
(2018-03-09)Dynamic behavior of impacting water drops on superhydrophobic solid surfaces provides important details on the stability/durability of such solid surfaces. Multi-scale surface roughness combined with a layer of low energy ... -
Influence of Chemo-Mechanical Factors on Compression and Undrained Strengths of Soft Kaolinites Prepared using Synthetic Seawater
(2017-11-28)Marine clay deposits are characterized by very soft to soft consistencies (undrained strength 1-50 kPa), presence of saline pore solution and low-swelling clays. Besides, loss of metastable structure on disturbance, poor ... -
Influence of Contact Stresses on Shape Recovery in Sputter Deposited NiTiCu Thin Films
(2017-10-05)NiTiCu is a shape memory alloy that regains its original shape after large amount of shape changing deformation when heated above a critical temperature called reverse martensitic trans-formation temperature( Af). When ... -
Influence of Electric Field on the Global and Local Structure in the Ferroelectric Ceramic Na1/2Bi1/2TiO3 and its Solid Solutions with BaTiO3 and K1/2Bi1/2TiO3
(2018-08-14)Ferroelectric ceramics are very promising materials for a variety of piezoelectric applications such as high permittivity dielectrics, piezoelectric sensors, piezoelectric/electrostrictive transducers, actuators, electro-optic ... -
Influence of Hydrodynamic Slip on the Wake Dynamics and Convective Transport in Flow Past a Circular Cylinder
(2018-06-14)Hydrodynamic slip is known to suppress vorticity production at the solid-fluid boundary in bluff body flows. This suppression combined with the enhanced vorticity convection results in a substantial reduction in the unsteady ... -
Influence Of Joint Compliance On The Behaviour Of Space Structures
(Indian Institute of Science, 2007-03-06)Space structures are inevitable while covering large spans. Space structures are skeletal structures, which are lighter for the same stiffness when compared with RCC roofs. Till now, space structures, like any other metal ...