Browsing Division of Mechanical Sciences by Title
Now showing items 304-323 of 2275
-
Continuum Analysis of Cavitation Induced Failure and Tensile Deformation Response of Metallic Glasses & Nanoglasses
Metallic glasses (MGs), which are metals solidified in an amorphous state, have shown attractive mechanical properties such as high strength (up to 5 GPa), yield strain (around 2%) and good corrosion resistance. They ... -
Continuum Modeling Of Adhesive Interaction Based On Interatomic Potentials
(2018-01-12)Adhesion between solid bodies plays a prominent role in a wide variety of situations ranging from tribological applications to dust coagulation initiating the formation of planets. It can be due to various reasons like ... -
Control and Safety of Multi-UAV Systems for Collaborative Payload Transportation and Target Tracking
Unmanned aerial vehicles (UAVs) have been widely used in reconnaissance, remote sensing, disaster relief, and agricultural applications. Many applications require multiple UAVs to cooperate to complete the assigned tasks. ... -
Control of Alternating Flow Phenomena in Transonic Shock Wave Boundary Layer Interactions Over Payload Region of a Generic Launch Vehicle Model
During the transonic phase of a launch vehicle’s ascent, aerodynamic loads peak due to high freestream dynamic pressure and angle of attack. In addition to steady loads, significant pressure fluctuations arise from Shock ... -
Control of shock-induced vortex breakdown in Transonic regime on a slender delta wing body configuration using blowing
Modern high speed aircrafts feature highly swept and low aspect ratio wings, mainly to increase the critical Mach number and reduce the wave drag. A special case of swept wings is wings with triangular planform commonly ... -
Cooling Of Electronics With Phase Change Materials Under Constant Power And Cyclic Heat Loads
(2009-12-14)The trend in the electronic and electrical equipment industry towards denser and more powerful product requires a higher level of performance from cooling devices. In this context, passive cooling techniques such as latent ... -
Core-Shell Precipitates in Ternary Alloys: A Phase-Field Study
Since the discovery of age hardening, a large number of alloys have been produced that exploit the presence of one or more precipitate phases in the microstructure for strength enhancement. In recent decades, alloys with ... -
Correlation Between Microstructure and Corrosion Properties of Electrodeposited Nickel and Zinc Based Coatings
Conventional metallic coatings such as Ni and Zn are extensively used in corrosion protection applications. In most studies on the corrosion behavior of metallic coatings, the emphasis is on correlating morphology and ... -
Correlation Between Microstructure, Electrochemical Degradation and Hydrogen Permeation behaviour of Electrodeposited Cobalt Based Coatings
The application of cobalt and cobalt based coatings is limited by their electrochemical degradation in corrosive environments. In the present work, corrosion and hydrogen permeation behavior of electrodeposited Co and ... -
Correlation Between Structure, Microstructure and Enhanced Piezoresponse Around the Morphotropic Phase Boundary of Bismuth Scandate-Lead Titanate Piezoceramic
(2018-05-11)Piezoelectric materials find use as actuators and sensors in automotive, aerospace and other related industries. Automotive applications such as fuel injection nozzles and engine health monitoring systems require operating ... -
Corrosion and related electrochemical studies on ziroconium (in nitrate melts, nitrats fluoride melts and aqueous nitrate solutions)
The thesis embodies the results of the investigations on the corrosion of zirconium in nitrate melts. The predicted thermodynamic behaviour of zirconium in 2-component NaNO?-KNO? eutectic melts based on E-pO diagrams ... -
Corrosion And Wear Behaviour of Plasma Electrolytic Oxidation And Laser Surface Alloy Coatings Produced on Mg Alloys
(2017-10-11)In the present investigation, surface coatings employing laser surface alloying (LSA) and plasma electrolytic oxidation (PEO) processes have been prepared on Mg alloys. The coatings have been investigated for corrosion and ... -
Coupled Heat Transfer Processes in Enclosed Horizontal Heat Generating Rod Bundles
(2018-03-24)In a nuclear fuel cask, the heat generating spent fuel rods are packed in a housing and the resulting bundle is placed inside a cask of thick outer shell made of materials like lead or concrete. The cask presents a wide ... -
Coupled vibro-acoustics of an unbaffled plate
In this work, that falls largely in the realm of applied mathematics, we consider a fluid-loaded finite simply-supported rectangular unbaffled plate with the following objectives: a) to derive a closed form mathematical ... -
Crack Tip Fields And Mechanisms Of Fracture In Ductile FCC Single Crystals
(2015-01-07)An understanding of crack tip fields and fracture mechanisms in single crystals can help in developing better polycrystalline alloys and manufacturing processes. To this end, the effects of loading rate, material inertia ... -
Creation of an Orderly Jet and Thrust Generation in Quiescent Fluid from an Oscillating Two-dimensional Flexible Foil
(2018-02-22)In nature, many of the flapping wings and fins in swimming and flying animals have various degrees of flexibility with strong and coupled solid-fluid interactions between the structure and the fluid. In most cases, the ... -
Creep And Grain Boundary Sliding In A Mg-0.7% Al Alloy
(2011-08-25) -
Creep, Wear And Corrosion Behaviour Of Novel Magnesium Alloys And Composites
(2011-04-01)In the present investigation, MMCs have been fabricated using the creep-resistant AE42 magnesium alloy as matrix and reinforcing it with saffil short fibres (essentially δ-Al2O2) and SiC particles in various combinations. ... -
Critical Excitation And Inverse Approach In Random Vibration
(2011-06-22)