Browsing Division of Mechanical Sciences by Title
Now showing items 290-309 of 1799
-
Design and Development of Hybrid Metal and Polymer Additive Manufacturing System
Additive manufacturing (AM) is a layer-based manufacturing process aimed at producing parts directly from a Computer-aided design (CAD) model. There are various types of AM systems, which can be classified based on: (i) ... -
Design and development of lateral force-controlled tribosystems
In a tribo-system, the frictional resistance during a sliding process depends on several parameters. These parameters include the interacting materials, their surface topography, contact conditions such as normal load, ... -
Design And Development Of Miniature Compliant Grippers For Bio-Micromanipulation And Characterization
(2017-05-24)Miniature compliant grippers are designed and developed to manipulate biological cells and characterize them. Apart from grippers, other compliant mechanisms are also demonstrated to be effective in manipulation and ... -
Design and Development of Piezoelectric Stack Actuated Trailing Edge Flap for Helicopter Vibration Reduction
(2018-01-09)This research investigates on-blade partial span active plain trailing edge flaps (TEFs)with an aim to alleviate the helicopter vibrations. Among all the available smart materials, piezoelectric stack actuator(PEA)has shown ... -
Design and Fabrication of Conjugated Molecule Based Resistive Sensor for Environmental Monitoring Detecting Targeted Analytes
(2018-06-05)Volatile organic compounds (VOCs) in air and heavy metal ions, anions, microorganism in water are environmental contaminants that require detection at certain low concentrations to avoid detrimental effects. Analytical ... -
Design And Manufacturing Of Impact Resisting Structures (Aluminium Foam)
(2009-09-02)Metal foams have found increasing applications in a wide range of structural and functional products, due to their exceptional mechanical, thermal, acoustic and electrical properties and offer great potential for lightweight ... -
Design and Performance Analyses of Osculating Cone Waveriders
Modern mission requirements for long-range maneuverable hypersonic vehicles for space, military, and transportation applications necessitate vehicle design innovations. The primary challenges that a hypersonic vehicle ... -
Design and Performance Investigation of Supersonic Air-Intakes
Supersonic air-intake is an essential component of a ramjet engine. Typically, a ramjet powered missile that operate over a range of Mach numbers and maneuverability conditions uses a fixed geometry intake to ensure ... -
A Design Concept of a Volumetric Solar Receiver for Supercritical CO2 Brayton Cycle
(2018-01-09)Recently, the supercritical carbon dioxide (s-CO2) Brayton cycle has been identified as a promising candidate for solar-thermal energy conversion due to its potentially high thermal efficiency (50%, for turbine inlet ... -
Design Flood Estimation at Ungauged Locations using Geomorphological Characteristics
Estimates of design flood are necessary at locations of hydrologic structures (e.g., flood control dams, barrages) in studies related to their planning, design and risk assessment. In situations, where failure of hydrologic ... -
Design of Curved Aggressive Annular Diffusers
For economical air transportation, aero engines with lower specific fuel consumption, lower emissions and lower noise levels are required. To this end, the use of turbofan engine with high bypass ratio is an option. With ... -
Design of Planar Supersonic Wind Tunnel Nozzle
This thesis revisits the design of a planar supersonic nozzle for a supersonic wind tunnel using the method of characteristics (MOC) and Computational Fluid Dynamics (CFD). While design of a converging-diverging (CD) ... -
Design Of Two-Axis Displacement-Amplifying Compliant Mechanisms Using Topology Optimization
(2010-07-14)This thesis deals with the design of two-axis displacement-amplifying compliant mechanisms (DaCMs) using topology optimization. The two-axis compliant mechanisms considered here are XY positioners and two-axis inertial ... -
A Design Procedure for Flapping Wings Comprising Piezoelectric Actuators, Driver Circuit, and a Compliant Mechanism
(2018-06-05)Flapping-wing micro air vehicle (MAV) is an emerging micro-robotic technology, which has several challenges toward its practical implementation. Inspired by insect flight, researchers have adopted bio-mimicking approach ... -
Design, Analysis, Simulation and Experimentation of a Flexible Spine Quadruped
Quadrupeds robots can move on uneven and rough terrain where mobile robots cannot venture. Al-though bipeds have more capabilities, they are inherently unstable and difficult to control. Most quadrupeds today are built ... -
Design, Control and Experimental Validation of a Robust Adaptive Feedback Linearization Controller for a Quadcopter Manipulator System
A quadcopter manipulator system (QMS) is an aerial robot comprising a quadcopter with a three degree of freedom manipulator mounted at the bottom of the vehicle. An aerial robot can reach otherwise inaccessible ... -
Design, Development And Flight Control Of Sapthami - A Fixed Wing Micro Air Vehicle
(2010-09-21)Two micro air vehicles, namely Sapthami and Sapthami-flyer, are developed in this thesis. Their total weight is less than 200grams each. They fit inside a 30cm and 32cm sphere respectively and carry the commercially available ... -
Design, Fabrication and Application of In situ Total Internal Reflection (TIR) Raman Tribometer For the Chemical Analysis of Tribological Systems
In conventional tribological experiments that study friction and wear behavior of materials, the contact interface is hidden by the contacting bodies. The physical or chemical phenomena taking place at the interface must ... -
Destabilisation and Failure of Cylindrical Nanopores : A Phase Field Study
(2017-11-28)Phase field models have played an important role in shaping our understanding of a variety of micro structural phenomena in materials. Their attractive features include (a) their ability to capture instabilities in ...