Browsing Division of Mechanical Sciences by Title
Now showing items 244-263 of 1795
-
Control of shock-induced vortex breakdown in Transonic regime on a slender delta wing body configuration using blowing
Modern high speed aircrafts feature highly swept and low aspect ratio wings, mainly to increase the critical Mach number and reduce the wave drag. A special case of swept wings is wings with triangular planform commonly ... -
Cooling Of Electronics With Phase Change Materials Under Constant Power And Cyclic Heat Loads
(2009-12-14)The trend in the electronic and electrical equipment industry towards denser and more powerful product requires a higher level of performance from cooling devices. In this context, passive cooling techniques such as latent ... -
Correlation Between Microstructure and Corrosion Properties of Electrodeposited Nickel and Zinc Based Coatings
Conventional metallic coatings such as Ni and Zn are extensively used in corrosion protection applications. In most studies on the corrosion behavior of metallic coatings, the emphasis is on correlating morphology and ... -
Correlation Between Structure, Microstructure and Enhanced Piezoresponse Around the Morphotropic Phase Boundary of Bismuth Scandate-Lead Titanate Piezoceramic
(2018-05-11)Piezoelectric materials find use as actuators and sensors in automotive, aerospace and other related industries. Automotive applications such as fuel injection nozzles and engine health monitoring systems require operating ... -
Corrosion And Wear Behaviour of Plasma Electrolytic Oxidation And Laser Surface Alloy Coatings Produced on Mg Alloys
(2017-10-11)In the present investigation, surface coatings employing laser surface alloying (LSA) and plasma electrolytic oxidation (PEO) processes have been prepared on Mg alloys. The coatings have been investigated for corrosion and ... -
Coupled Heat Transfer Processes in Enclosed Horizontal Heat Generating Rod Bundles
(2018-03-24)In a nuclear fuel cask, the heat generating spent fuel rods are packed in a housing and the resulting bundle is placed inside a cask of thick outer shell made of materials like lead or concrete. The cask presents a wide ... -
Crack Tip Fields And Mechanisms Of Fracture In Ductile FCC Single Crystals
(2015-01-07)An understanding of crack tip fields and fracture mechanisms in single crystals can help in developing better polycrystalline alloys and manufacturing processes. To this end, the effects of loading rate, material inertia ... -
Creation of an Orderly Jet and Thrust Generation in Quiescent Fluid from an Oscillating Two-dimensional Flexible Foil
(2018-02-22)In nature, many of the flapping wings and fins in swimming and flying animals have various degrees of flexibility with strong and coupled solid-fluid interactions between the structure and the fluid. In most cases, the ... -
Creep And Grain Boundary Sliding In A Mg-0.7% Al Alloy
(2011-08-25) -
Creep, Wear And Corrosion Behaviour Of Novel Magnesium Alloys And Composites
(2011-04-01)In the present investigation, MMCs have been fabricated using the creep-resistant AE42 magnesium alloy as matrix and reinforcing it with saffil short fibres (essentially δ-Al2O2) and SiC particles in various combinations. ... -
Critical Excitation And Inverse Approach In Random Vibration
(2011-06-22) -
Crustal evolution and tectonic processes of the Madras Block, India
The Neoarchaean (2.8–2.5 Ga) era in the earth’s history witnessed significant crustal growth related to the amalgamation and dispersion of ancient continents. The processes leading to the formation and destruction of the ... -
The Crustal Evolution of Nilgiri Block, Southern India : A Study on Archean Tectonics and Crustal Growth
(2018-08-02)The oldest dated rocks from the Acasta gneisses of the western Slave Province, Canada present an igneous age of ~4030 Ma. Following this the detrital zircons from the Jack Hills, Narryer Gneiss Terrane, Yilgarn Craton, ... -
Crystal Nucleation in Binary Hard Sphere Mixtures
(2018-03-06)Homogeneous crystal nucleation in binary hard sphere mixtures is an active area of research for last two decades. Although Classical nucleation theory (CNT) gives a qualitative picture, it fails at high super saturations ... -
Cyclic Pursuit : Variants and Applications
(2018-02-11)The classical n-bugs problem has attracted considerable attention from researchers. This problem stems from the study of movement of a group of animals. In the context of multi- agent systems the problem has been modelled ... -
Cylindrical Fretting And Delamination : Axisymmetric Static And Dynamic Analysis
(2011-01-17)Axisymmetric analysis of cylindrical contacts is considered in the context of axisymmetric assemblies such as shrink-fits. Fretting fatigue induces sub-critical cracks along the contact interface of press fits especially ...