Browsing Division of Mechanical Sciences by Title
Now showing items 1663-1682 of 1799
-
TEM Characterization of Microstructural Evolution of GaN Grown by MOCVD on c-Sapphire
III-Nitrides (AlN, GaN, InN) find use in the high-power high frequency applications. Bulk GaN substrates are difficult to grow, therefore the GaN based structures must be grown on foreign substrates. In this thesis, ... -
Temporal Persistence and Spatial Coherence of Tropical Rainfall
(2018-01-01)The work presented in the thesis focuses on systematically documenting the multi scale nature of the temporal persistence and spatial coherence of tropical rainfall. There are three parts to the thesis: The first two parts ... -
Tensile And Low Cycle Fatigue Behavior Of A Ni-Base Superalloy
(2009-12-14)Background and Objective: Nickel-base superalloys, strengthened by a high volume fraction of Ni3Al precipitates, have been the undisputed choice for turbine discs in gas turbines as they exhibit the best available combination ... -
Tensile Behavior Of Free-Standing Pt-Aluminide (PtAl) Bond Coats
(2016-05-03)Pt-aluminide (PtAl) coatings form an integral part of thermal barrier coating (TBC) systems that are applied on Ni-based superalloy components operating in the hot sections of gas turbine engines. These coatings serve as ... -
Testing Methodologies for Probing Site Specific Fatigue Response of Graded Coatings
Thermal barrier coating systems (TBC’s) employed in the high pressure turbine section of a modern aero-turbine engine serve as an example of constrained material systems used for engineering applications. TBC’s today are ... -
Testing of Ground Subsurface using Spectral and Multichannel Analysis of Surface Waves
(2018-06-29)Two surface wave testing methods, namely, (i) the spectral analysis of surface waves (SASW), and (ii) the multi-channel analysis of surface waves (MASW), form non-destructive and non-intrusive techniques for predicting the ... -
Testing the Hypothesis of Quorum Sensing in Vibrio fischeri : Luminescence, Motility, and Biofilm
(2018-03-15)The individual behaviour of prokaryotic organisms such as bacteria often gives rise to complexity that is commonly associated with multicellular behaviour. The transition from unicellular to multicellular behaviour occurs ... -
Theoretical And Experimental Studies Of Capillary Pumped Loop And Loop Heat Pipe
(2010-07-13)Capillary pumped loop (CPL) and loop heat pipe (LHP), are two-phase heat transport devices which rely on surface tension induced by a fine pore wick to drive a working fluid in a loop. These are based on a working principle ... -
Theoretical and Numerical Study of Microstructure Formation in Multi-component Alloys
The length scale, composition, orientation of the phases in a material constitutes its microstructure. In order to appreciate the whole gamut of microstructures observed in multi-component alloys, an identification of the ... -
Theoretical Studies of the Mechanisms of the Entry of Virus into Cells
(2018-02-09)Viruses cause human diseases by entering in to human cells. Many drugs have been developed that act at various stages of viral infection, but they fail due to their toxic side effects and high mutation rates of viruses. ... -
Therapeutic Applications of Biodegradable Chitosan Based Polyelectrolyte Nanocapsules
(2018-01-18)The past few years have witnessed significant work being directed towards drug delivery systems with layer-by layer (LbL) technique prominently featured as one of the most sought after approach. However, majority of the ... -
Thermal Behaviour Of Mono-Fibre Composites And Hybrid Composites At Cryogenic Temperatures
(2013-01-31)Hybrid composites forms an important field of research in the area of composite science and engineering as it gives the advantage of avoiding complex lay-up designs and provides better tuning compatibility to get desired ... -
Thermal Performance of Various Roof Elements Under Different Weather Conditions
(2018-05-14)Beside the point of whether the country is developed or underdeveloped, energy crisis is a common scene all over the world. In order to balance energy supply and demand, either one has to increase the supply or decrease ... -
Thermal Turbomachinery Design for Closed Thermal Cycles and Multiple Fluids
Closed-cycle gas turbines can complement conventional power conversion systems due to their potential for improved efficiencies, compact system layouts, and the ability to exploit non-fossil fuel energy sources which leads ... -
Thermo-Mechanical Processing of Third Generation γ – Titanium Aluminides
The γ – TiAl based intermetallics are characterized by unique combination of the properties which make these materials amenable for the application in gas turbines. However, due to problems related to limited plasticity ... -
Thermochemical conversion of biomass – single particle and packed bed: Experimental and Numerical Studies
The current work uses experimental and numerical techniques to analyze the thermochemical conversion of a single biomass particle exposed to various reactive environments – varying temperatures and O2, CO2 and H2O ...