Browsing Division of Mechanical Sciences by Title
Now showing items 1620-1639 of 1799
-
Sub-Newtonian Coalescence in Polymeric Fluids
Droplet coalescence is a thermodynamic equilibration process driven by surface energy minimization. The physics of this phenomenon is characterized by the temporal evolution of a liquid bridge formed upon the proximate ... -
Subsonic, turbulent, round and plane, twin jets
Multiple jets appear in many engineering applications such as engines of launch vehicles and aircraft, fuel injectors and other mixing devices. Twin jets are models to understand the differences from single jets that can ... -
Subsurface Profiling of Shallow Bedrock Sites by Integrated Approach and Site-specific 2d Site Response Analysis
Estimation of reliable site effects and amplifications are important for seismic design. There are several 1D and 2D large scale site response analyses were reported in the literature and very limited shallow bedrock small ... -
Super-Convergent Finite Elements For Analysis Of Higher Order Laminated Composite Beams
(2009-08-12)Advances in the design and manufacturing technologies have greatly enhanced the utility of fiber reinforced composite materials in aircraft, helicopter and space- craft structural components. The special characteristics ... -
Supercritical CO2 Power Cycles and Turbomachinery Development for Renewable Energy and Waste Heat Recovery
Supercritical carbon dioxide (sCO2) power cycles have transitioned from the kilowatt level pilot facilities to the megawatt level demonstration plants. Theoretical studies and commercial benefits associated with sCO2, such ... -
Superplastic Deformation Behaviour Of AZ31 Magnesium Alloy
(2009-05-29)Superplastic deformation behaviour of AZ31 magnesium alloy having initial grain sizes 8, 11 and 17μm alloy was investigated at 673 K with initial strain rates ranging from 1x10-2 to 1x10-4 s-1. Mechanical data on fine ... -
Supporting Designers in Generating Novel Ideas at the Conceptual Stage Using Analogies from the Biological Domain
The aim of this research is to support designers in novel idea generation using design-by-analogy method, in particular, by using analogies from the biological domain. The motivation behind this research is to aid designers ... -
Supporting Environmentally-benign Design at Conceptual Stage
An ‘environmentally-benign design’ is defined as that which causes little or no harm to the natural environment and may be achieved by reducing the environmental impact of the design solutions conceptualised, to be ... -
Supporting Novelty In Conceptual Phase Of Engineering Design
(2013-10-08)Current design models, approaches and theories are highly fragmented, have seldom been compared with one another, and rarely attempted to be consolidated. Novelty is a measure of creativity of engineering products and ... -
Supporting Real-Time, Automated Evaluation of Difficulty in Manual Assembly
(2018-08-29)Product designers address the costs of assembly during the design process. Design process can be more efficient if assembly issues could be addressed early in its design process. Doing this requires the ability to assess ... -
Surface Energy Budget Over A Land Surface In The Tropics
(2009-05-21)Atmospheric convection is sensitive to the nature of the surface and its temperature. Both dry (without cloud) and moist (with cloud) convections depend on the surface temperature. Surface temperature is of critical ... -
Sustainability by Design : A Descriptive Model of Interaction and a Prescriptive Framework for Intervention
(2017-11-13)Introduction: Sustainability is humanity’s collective ability to sustain development that meets the needs of the present without compromising the ability of the future generations to meet their own needs. Preceding closely ... -
Sustainable and Energy Efficient Treatment Potential of Mixed Algal Consortia for High Nutrient Organic Wastewaters
The increasing levels of generation of nutrient rich wastewaters around the world pose serious challenges where conventional biological and chemical methods of treatment have gradually begun to fail in meeting sustainability ... -
Swarm Intelligence And Evolutionary Computation For Single And Multiobjective Optimization In Water Resource Systems
(2008-10-03)Most of the real world problems in water resources involve nonlinear formulations in their solution construction. Obtaining optimal solutions for large scale nonlinear optimization problems is always a challenging task. ... -
Swelling and Dye Adsorption Characteristics of Superabsorbent Polymers
(2018-07-18)In the current study, SAPs of cationic monomer [2 - (Methacryloyloxy) ethyl] trimethylammonium chloride have been prepared by free radical solution polymerisation with different crosslinkers. They were subjected to repeated ... -
Symmetry-Breaking Transitions In Equilibrium Shapes Of Coherent Precipitates
(Indian Institute of Science, 2005-12-22)We present a general approach for determining the equilibrium shape of isolated, coherent, misfitting particles by minimizing the sum of elastic and interfacial energies using a synthesis of finite element and optimization ... -
Synchronized and Balanced Collective Formations in Multi-Agent Systems
(2018-07-14)Multi-agent systems possess improved robustness properties over single agent systems, and hence, are more desirable for various engineering applications, where it is required for the multiple agents to move in a formation. ... -
A Synergetic Micromechanics Model For Fiber Reinforced Composites
(2014-09-08)Composite materials show heterogeneity at different length scales. hence concurrent multiscale analysis is the only reliable method to analyze them. But unfortunately there is no concurrent multi-scale strategy that is ...