Browsing Division of Mechanical Sciences by Title
Now showing items 1613-1632 of 1799
-
A Study On Inelastic Response Of Multi-Storey Buildings To Near-field Ground Motions
(2009-07-21)With the advancement in knowledge of inelastic response of structures, the design and construction practices of reinforced concrete buildings have been changing worldwide. Most of the codes are incorporating the near-fault ... -
A Study on Isogeometric Analysis of Laminated Composite Beams
A myriad of physical processes in engineering and other science branches is represented using differential equations with boundary conditions. Finding the exact solution for the differential equation is quite challenging ... -
Study On Reactive Hot Pressing Of Zirconium Carbide
(2017-04-27)Group IV transition metal carbides are promising materials for high temperature structural application, due to their unique sets of properties such as high melting temperature, high temperature strength, hardness, elastic ... -
A Study on the Effect of Inhomogeneous Phase of Shape Memory Alloy Wire
(2018-05-25)The present study in this thesis has attempted to resolve one of the key aspects of enhancing predictability of macroscopic behavior of Shape Memory Alloy (SMA) wire by considering variation of local phase inhomogeneity. ... -
A Study on the Influence of Reduced Electric Field on Plasma Assisted Combustion Kinetics
Plasma assisted combustion (PAC) technology has attracted much attention in the recent years as an innovative technique to improve the combustion efficiency. Plasma can enhance the combustion process mainly through two ... -
A Study On The Predictive Optimal Active Control Of Civil Engineering Structures
(Indian Institute of Science, 2006-07-18)Uncertainty involved in the safe and comfort design of the structures is a major concern of civil engineers. Traditionally, the uncertainty has been overcome by utilizing various and relatively large safety factors for ... -
Studying the effect of Re on the Co-Ni-Al-Ti-Nb-Cr superalloy’s coarsening kinetics and establishing the high-throughput diffusion couple approach for alloy design
The studies are conducted to understand the effect of Re addition on microstructural evolution and coarsening kinetics of new Co-Ni-Al-Ti-Nb-Cr based superalloys. Lattice misfit is reduced by adding Re, confirmed from ... -
Sub-Newtonian Coalescence in Polymeric Fluids
Droplet coalescence is a thermodynamic equilibration process driven by surface energy minimization. The physics of this phenomenon is characterized by the temporal evolution of a liquid bridge formed upon the proximate ... -
Subsonic, turbulent, round and plane, twin jets
Multiple jets appear in many engineering applications such as engines of launch vehicles and aircraft, fuel injectors and other mixing devices. Twin jets are models to understand the differences from single jets that can ... -
Subsurface Profiling of Shallow Bedrock Sites by Integrated Approach and Site-specific 2d Site Response Analysis
Estimation of reliable site effects and amplifications are important for seismic design. There are several 1D and 2D large scale site response analyses were reported in the literature and very limited shallow bedrock small ... -
Super-Convergent Finite Elements For Analysis Of Higher Order Laminated Composite Beams
(2009-08-12)Advances in the design and manufacturing technologies have greatly enhanced the utility of fiber reinforced composite materials in aircraft, helicopter and space- craft structural components. The special characteristics ... -
Supercritical CO2 Power Cycles and Turbomachinery Development for Renewable Energy and Waste Heat Recovery
Supercritical carbon dioxide (sCO2) power cycles have transitioned from the kilowatt level pilot facilities to the megawatt level demonstration plants. Theoretical studies and commercial benefits associated with sCO2, such ... -
Superplastic Deformation Behaviour Of AZ31 Magnesium Alloy
(2009-05-29)Superplastic deformation behaviour of AZ31 magnesium alloy having initial grain sizes 8, 11 and 17μm alloy was investigated at 673 K with initial strain rates ranging from 1x10-2 to 1x10-4 s-1. Mechanical data on fine ... -
Supporting Designers in Generating Novel Ideas at the Conceptual Stage Using Analogies from the Biological Domain
The aim of this research is to support designers in novel idea generation using design-by-analogy method, in particular, by using analogies from the biological domain. The motivation behind this research is to aid designers ... -
Supporting Environmentally-benign Design at Conceptual Stage
An ‘environmentally-benign design’ is defined as that which causes little or no harm to the natural environment and may be achieved by reducing the environmental impact of the design solutions conceptualised, to be ... -
Supporting Novelty In Conceptual Phase Of Engineering Design
(2013-10-08)Current design models, approaches and theories are highly fragmented, have seldom been compared with one another, and rarely attempted to be consolidated. Novelty is a measure of creativity of engineering products and ... -
Supporting Real-Time, Automated Evaluation of Difficulty in Manual Assembly
(2018-08-29)Product designers address the costs of assembly during the design process. Design process can be more efficient if assembly issues could be addressed early in its design process. Doing this requires the ability to assess ... -
Surface Energy Budget Over A Land Surface In The Tropics
(2009-05-21)Atmospheric convection is sensitive to the nature of the surface and its temperature. Both dry (without cloud) and moist (with cloud) convections depend on the surface temperature. Surface temperature is of critical ...