Browsing Electrical Engineering (EE) by Subject "Electrical Engineering"
Now showing items 81-100 of 152
-
Investigations On Lightning Surge Response Of Isolated Down Conductors
(2008-11-04)Lightning is a natural phenomenon involving transient high current discharge in the atmosphere. Cloud-to-ground lightning, wherein the discharge occurs between the cloud and the ground is quite hazardous to systems on the ... -
Lightning Shielding Failure Analysis of Ultra High Voltage Power Transmission Lines
(2018-08-14)In India, the natural energy resources (thermal and hydro) are unevenly distributed and are mostly present in the remote areas and the load centers are distributed across various regions of the country. Therefore high ... -
Lightning Threat to Cables on Tall Towers and the Question of Electrical Isolation
(2018-04-23)Electromagnetic effects of lightning currents during a direct hit to tall communication towers, other instrumented towers and chimneys can be hazardous to associated cables, as well as, electrical and electronics systems. ... -
Loss Ratios of Different Scheduling Policies for Firm Real-time System : Analysis and Comparisons
(2017-11-27)Firm real time system with Poisson arrival process, iid exponential service times and iid deadlines till the end of service of a job, operated under the First Come First Served (FCFS) scheduling policy is well studied. In ... -
Low Switching Frequency Pulse Width Modulation for Induction Motor Drives
(2018-06-11)Induction motor (IM) drives are employed in a wide range of industries due to low maintenance, improved efficiency and low emissions. Industrial installations of high-power IM drives rated up to 30 MW have been reported. ... -
A Macroscopic Physical Model For Lightning Return Stroke
(2014-10-15)In the design of most of the modern systems, lightning threat needs to be considered at the design phase itself. This demands a suitable model and owing to associated complexity, only simplified modeling have been attempted. ... -
Modeling and Analysis of Grid Connected Variable Speed Wind Generators
(2018-08-13)The growing demand for power and increased environmental concerns gave an impetus to the growth of clean and renewable energy sources like wind, solar etc. There is a remarkable increase in the penetration of wind energy ... -
Modeling Of Dust Loaded Electrical Characteristics And Collection Efficiency Of Industrial Electrostatic Precipitators
(2010-12-08)With the increase in population and industrial growth, the need for power has increased manifold. A major share of India’s power generation is coal-based generation. Thermal power generation through coal combustion produces ... -
Modeling, Analysis And Control Of Single-Phase And Three-Phase PWM Rectifiers
(2009-06-16)Pulse width modulation (PWM) rectifiers are extensively used in battery charger, regulated dc voltage source, UPS systems, ac line conditioner and motor drives. The conventional control schemes for these rectifiers require ... -
Modelling Of Current-Zero Behaviour Of An SF6 Rotating Arc
(2012-11-29) -
Moisture Aided Degradation of Oil Impregnated Paper Insulation in Power Transformers
(2018-01-03)Transformers are the most expensive and critical asset in any electrical power network. Their failure results in long interruption of power supply with consequent loss of reliability and revenue. Understanding and detection ... -
Motion Estimation From Moments Of Projection Data For Dynamic CT
(2016-09-15)In X-ray computed tomography, motion of the object (breathing, for example) while X-ray projections are acquired for tomographic reconstruction leads to mo- tion artifacts in the reconstructed image. Object motion (such ... -
A Networked Control Systems Framework for Smart Grids with Integrated Communication
(2018-02-28)Over the last decade, power systems have evolved dramatically around the world, owing to higher demand, stringent requirements on quality and environmental concerns that are becoming increasingly critical. With the ... -
New Algorithms for Some Economic Dispatch Problems
(2018-01-01)An electric power system consists of several generating stations which cater to the load demands of various regions. The prime function of any generating utility is to optimally schedule the real power output of its ...