Browsing Materials Research Centre (MRC) by Title
Now showing items 195-202 of 202
-
Understanding quantitative process physics of 3D binderjet printing with validation in Ti-6Al-4V and inkjet bioprinting of mammalian cells
In the field of additive manufacturing, laser or electron beam based 3D printing is widely investigated for biomedical applications. However, much less explored is the binderjet 3D printing, which allows processing of ... -
Understanding The Growth And Properties Of Functional Inorganic Nanostructures : An Interfacial Approach
(2010-07-23)Surfaces and interfaces are of fundamental importance from the nucleation to growth of crystals formed under different conditions such as vapor phase, liquid phase including biomineralisation conditions. Recently there is ... -
Understanding the influence of electric field and dual doping on cytocompatibility of calcium phosphate bioceramics: Experimental and computational study
Although doped bioceramics have been widely investigated for biomedical applications, the co-doped bioceramics remain mostly unexplored for bone regeneration and dental applications. Given this background, we have successfully ... -
Understanding The Science of Biocompatibility of Dental Implants: Biomechanical, Pre-Clinical and Clinical Validation of New Design Concepts
Dental implants, a prominent field of research, have evolved from prehistoric times to the present. Despite this long history, many aspects still require improvement, particularly in understanding primary stability and ... -
Vanadium Dioxide: Bulk and Thin Films for Device Applications
In the present era, energy consumption is more than the energy that is generated for which renewable as well as non-renewable sources are used. In order overcome this lag, researchers are developing smart materials ... -
Vapour Phase Transport Growth of One-Dimensional Zno Nanostructures and their Applications
(2018-05-01)One-dimensional (1D) nanostructures have gained tremendous attention over the last decade due to their wide range of potential applications. Particularly, ZnO 1D nanostructures have been investigated with great interest ... -
Vapour Pressure Studies Of Precursors And Atomic Layer Deposition Of Titanium Oxides
(2010-07-16)This thesis describes the deposition of thin films of titanium oxide and Magnéli phases of titanium oxide by atomic layer deposition (ALD) using a novel β-ketoesterate precursor. Titanium oxide is a promising candidate for ... -
Wide Band Gap Oxides as the Probes for Optical Based Sensing Applications
Temperature is a very critical and widely measured variable by both researchers and engineers. In this regard, most of the available temperature sensors are based on contact mode of operation. In this consideration, the ...