Browsing by Title
Now showing items 1588-1607 of 8778
-
Development And Performance Study Of Nanostructured Metal Oxide Gas Sensor
(2015-01-07)The basic necessities to sustain life are – air, water and food. Although the harmful effects due to contaminated food or water are dangerous to life, these can be reduced/avoided by controlling the intake. Whereas, in ... -
Development and Performance Study of Thick Gas Electron Multiplier (THGEM) Based Radiation Detector
(2018-04-23)Radiations can be classified as either ionizing or non-ionizing according to whether it ionizes or does not ionize the medium through which they propagate. X-rays photons and gamma rays are the typical examples of ionizing ... -
Development and Studies of Open-Pore Metal Foam for Diverse Applications
This thesis presents a method for producing open-cell metal foams by vibration-assisted casting (VAC) and its studies for diverse engineering applications. Metal foams have a wide range of applications due to their several ... -
Development and Validation of Analytical Models for Diffuse Fluorescence Spectroscopy/Imaging in Regular Geometries
(2018-03-15)New advances in computational modeling and instrumentation in the past decade has enabled the use of electromagnetic radiation for non-invasive monitoring of the physio-logical state of biological tissues. The near infrared ... -
Development and Validation of Novel Methods for Measuring and Tracking Clean Energy Transitions: Case Studies from Rural India
Modern energy sources are crucial to gain all the benefits that modern living affords and is central to our idea of holistic human development. While they pose multitude benefits over their traditional counterparts, they ... -
Development And Validation Of Two-Dimensional Mathematical Model Of Boron Carbide Manufacturing Process
(2009-03-06)Boron carbide is produced in a heat resistance furnace using boric oxide and petroleum coke as the raw materials. In this process, a large current is passed through the graphite rod located at the center of the cylindrical ... -
Development of 2D and 3D Sketching Environment to Support Early Phases of Design
(2018-04-06)The traditional pen-paper sketching is extensively used in the early stages of product design as it supports creative exploration of product concepts and provides a fluidic mode for the expression of ideas. The Computer ... -
Development of 3D model and understanding translational regulation of breast cancer
Breast cancer is the most common cancer among women in India and worldwide. It is a highly heterogeneous disease caused by several genetic and epigenetic alterations in mammary epithelial cells. Both inter- and intra-patient ... -
Development of a coarsening resistant microstructure in precipitation strengthened aluminium alloys with Zr, Ta and Hf
The work herein aims at developing precipitation-strengthened aluminium-copper (Al-Cu) alloys that can meet the current challenges of the aeronautical and automobile sectors to increase the fuel efficiency where operating ... -
Development of a Flexible Actuator and Motion Planning for Endoscopic Robots
Endoscopy is a procedure by which a long flexible device called the `endoscope' is inserted into a patient's gastro-intestinal(GI) tract primarily for diagnosis. An endoscope is typically equipped with a camera, ... -
Development Of A Knowledge-Based Hybrid Methodology For Vehicle Side Impact Safety Design
(2011-08-05)The present research work has been carried out to develop a unified knowledge-based hybrid methodology combining regression-based, lumped parameter and finite element analyses that can be implemented in the initial phase ... -
Development of a low modulus Ti-Nb-Ta-O alloy for orthopedic applications
Ti-Nb-Ta-Zr based β-Titanium alloys are currently projected as potential candidates for use in orthopaedic implants owing to their low elastic modulus and use of non-toxic elements. However, most of these alloys contain ... -
Development Of A Multi-Construct Framework For Assessing Work-Life Balance : Validation And Its Applicability In the Indian Context
(2016-09-09)Introduction Work-Life Balance is an area of interest to both researchers and organizations who strive to understand the various facets of work, life and work-life. For an individual and society today, balance is of ... -
Development of a Multi-Criteria Decision Making Model for Continuous Evaluation of Employees to Offer Reward And Recognition
(2017-10-31)In today’s dynamic global environment, organizations need to be agile and adaptive by practicing innovative strategies in order to sustain and remain competitive. One indicator of organizational sustainability is its ... -
Development Of A New Finite-Volume Lattice Boltzmann Formulation And Studies On Benchmark Flows
(2011-06-30)This thesis is concerned with the new formulation of a finite-volume lattice Boltzmann equation method and its implementation on unstructured meshes. The finite-volume discretization with a cell-centered tessellation is ... -
Development of a novel LPG/PNG domestic burner for high efficiency and low emissions
Domestic cooking is one of the basic human needs, and cookstoves based on fuel combustion are widely used. LPG (Liquified Petroleum Gas) is the most common cooking fuel, followed by PNG (Piped Natural Gas), which has an ...