Browsing by Title
Now showing items 1182-1201 of 6415
-
Development And Performance Study Of Nanostructured Metal Oxide Gas Sensor
(2015-01-07)The basic necessities to sustain life are – air, water and food. Although the harmful effects due to contaminated food or water are dangerous to life, these can be reduced/avoided by controlling the intake. Whereas, in ... -
Development and Performance Study of Thick Gas Electron Multiplier (THGEM) Based Radiation Detector
(2018-04-23)Radiations can be classified as either ionizing or non-ionizing according to whether it ionizes or does not ionize the medium through which they propagate. X-rays photons and gamma rays are the typical examples of ionizing ... -
Development and Studies of Open-Pore Metal Foam for Diverse Applications
This thesis presents a method for producing open-cell metal foams by vibration-assisted casting (VAC) and its studies for diverse engineering applications. Metal foams have a wide range of applications due to their several ... -
Development and Validation of Analytical Models for Diffuse Fluorescence Spectroscopy/Imaging in Regular Geometries
(2018-03-15)New advances in computational modeling and instrumentation in the past decade has enabled the use of electromagnetic radiation for non-invasive monitoring of the physio-logical state of biological tissues. The near infrared ... -
Development And Validation Of Two-Dimensional Mathematical Model Of Boron Carbide Manufacturing Process
(2009-03-06)Boron carbide is produced in a heat resistance furnace using boric oxide and petroleum coke as the raw materials. In this process, a large current is passed through the graphite rod located at the center of the cylindrical ... -
Development of 2D and 3D Sketching Environment to Support Early Phases of Design
(2018-04-06)The traditional pen-paper sketching is extensively used in the early stages of product design as it supports creative exploration of product concepts and provides a fluidic mode for the expression of ideas. The Computer ... -
Development of 3D model and understanding translational regulation of breast cancer
Breast cancer is the most common cancer among women in India and worldwide. It is a highly heterogeneous disease caused by several genetic and epigenetic alterations in mammary epithelial cells. Both inter- and intra-patient ... -
Development of a coarsening resistant microstructure in precipitation strengthened aluminium alloys with Zr, Ta and Hf
The work herein aims at developing precipitation-strengthened aluminium-copper (Al-Cu) alloys that can meet the current challenges of the aeronautical and automobile sectors to increase the fuel efficiency where operating ... -
Development of a Flexible Actuator and Motion Planning for Endoscopic Robots
Endoscopy is a procedure by which a long flexible device called the `endoscope' is inserted into a patient's gastro-intestinal(GI) tract primarily for diagnosis. An endoscope is typically equipped with a camera, ... -
Development Of A Knowledge-Based Hybrid Methodology For Vehicle Side Impact Safety Design
(2011-08-05)The present research work has been carried out to develop a unified knowledge-based hybrid methodology combining regression-based, lumped parameter and finite element analyses that can be implemented in the initial phase ... -
Development of a low modulus Ti-Nb-Ta-O alloy for orthopedic applications
Ti-Nb-Ta-Zr based β-Titanium alloys are currently projected as potential candidates for use in orthopaedic implants owing to their low elastic modulus and use of non-toxic elements. However, most of these alloys contain ... -
Development Of A Multi-Construct Framework For Assessing Work-Life Balance : Validation And Its Applicability In the Indian Context
(2016-09-09)Introduction Work-Life Balance is an area of interest to both researchers and organizations who strive to understand the various facets of work, life and work-life. For an individual and society today, balance is of ... -
Development of a Multi-Criteria Decision Making Model for Continuous Evaluation of Employees to Offer Reward And Recognition
(2017-10-31)In today’s dynamic global environment, organizations need to be agile and adaptive by practicing innovative strategies in order to sustain and remain competitive. One indicator of organizational sustainability is its ... -
Development Of A New Finite-Volume Lattice Boltzmann Formulation And Studies On Benchmark Flows
(2011-06-30)This thesis is concerned with the new formulation of a finite-volume lattice Boltzmann equation method and its implementation on unstructured meshes. The finite-volume discretization with a cell-centered tessellation is ... -
Development Of A Plume With Off-Source Volumetric Heating
(2012-11-07) -
Development of A Reconfigurable Synchronous Machine Emulation Platform
Studying the dynamic behaviour of non-linear complex power systems in a laboratory is very challenging. Early experimental platforms used micro-alternators to emulate the behaviour of fixed steam and hydro turbine models. ...