In vitro diagnostic (IVD) tests are critical for making informed clinical decisions. These tests are performed outside the body using specimens such as blood, sputum, saliva, and urine. IVD tests are usually performed ...

The demand for miniaturization of energy storage systems has accelerated the development of on-chip micro-power devices for integration into portable electronic devices. Micro-supercapacitors can suitably cater to the need ...

ZnO, band gap of ~3.37eV, is a chemical stable, biocompatiable, non-toxic n-type semiconductor material. Due to advancement of microfabrication technology and chemical synthesis method, nanostructured ZnO are found to be ...

In summary, MoS2 coated, etched FBG sensors have been used for various applications. Firstly, the strain sensitivity has been studied; a high strain sensitivity of 6.3 pm/μɛ with a linear range of sensing response from 0 ...

Large area photodetectors with single photon counting ability motivates to develop gaseous photomultiplier (GPM), that combine thin film photocathode with electron multipliers for efficient detection of UV photon. This ...

Light Emitting Diodes (LEDs) have become a focus of global lighting community owing to their long service life, low energy consumption and environmental friendliness. The ever-increasing use of LEDs in many applications ...

Raman spectroscopy is based on inelastic scattering, which gives molecular information. Due to its weak nature, for a long-time Raman spectroscopy was limited to only study of molecular interactions, but with the advancement ...

This thesis is focused on the development of digestible electronics for healthcare. The vision is the development of an edible pill that performs diagnosis inside the body. Any such edible device needs an energy source ...

The interaction of ionizing radiations such as alpha, beta, gamma, and X-rays with matter-at bulk has been studied intensively for many decades. However, the interaction of ionizing radiations with matter-at-nanoscale ...