Browsing Mechanical Engineering (ME) by Subject "Tribology"
Now showing items 1-11 of 11
-
Characterization Of Al-Si Alloy Engine Bores For Tribological Studies
(2013-06-06)Aluminum - Silicon alloys are recognized as appropriate materials for high performance cast components used in transportation powertrain applications. A combination of excellent wear resistance, good thermal conductivity ... -
Design and development of lateral force-controlled tribosystems
In a tribo-system, the frictional resistance during a sliding process depends on several parameters. These parameters include the interacting materials, their surface topography, contact conditions such as normal load, ... -
Fundamental Studies On Tribological Response Of Titanium And Copper
(2007-08-22)Friction and wear have been observed m mechanical systems when there is a relative motion between two solid bodies Friction mainly results in loss of energy and wear results in matenal loss The proper understanding of ... -
In Situ Transmission Elecron Microscope Triboprobe For Tribological Studies Of Materials At Nanoscale
(2013-09-10)In most of the tribological experiments studying friction and wear behaviour, the contact interface is hidden. The present work attempts to overcome this hidden-interface problem by carrying out real-time tribological ... -
Influence of Surface Topography and Roughness on Lubrication, Friction and Scuffing in High Hardness Steels
In tribology engineering, friction control is a significant challenge. The interacting surfaces of mechanical components are typically designed for best efficiency during tribological operations and are primarily achieved ... -
Measurement And Analysis Of Friction Induced By A Cutting Operation Lubricated By Oil In Water Emulsion
(2013-09-05)The lubricants that are applied during metal cutting acts on the interface between the tool and the nascent surfaces generated by the cutting process. Dispersions of oil in water made using suitable emulsifier(s) are used ... -
New Solution Methods For Fractional Order Systems
(2010-09-24)This thesis deals with developing Galerkin based solution strategies for several important classes of differential equations involving derivatives and integrals of various fractional orders. Fractional order calculus finds ... -
Transfer Layer Formation And Friction In Extrusion Of Aluminum : An Experimental Study Using A High Temperature Vacuum Based Pin-On-Disc Machine
(2010-09-21)Hot extrusion of aluminum is widely practiced in industries for economic production of structural components. The surface finish and tolerance of the extruded components, both from design and aesthetic requirement, are ... -
Tribology Of Aluminium Alloys Against Steel Under Boundary Lubricated Condition
(2009-04-15)Aluminium silicon alloy has been found to be advantageous in many automobile components like pistons, cylinders, brakes and clutches. The main objective in using these alloys is to obtain lightweight and low friction ... -
Tribology Of An Etched Near-Eutectic Aluminium-Silicon Alloy Sliding Against A Steel Counterface
(2013-05-01)Lightweight aluminium-silicon alloy is an attractive material for making engine cylinders in automobiles. It imparts good power to weight ratio to the engine. High silicon containing aluminium alloys are used in current ...